TIA TSB-100-A-1-2006 Wireless Reference Network Model (Addendum to TSB-100-A).pdf

《TIA TSB-100-A-1-2006 Wireless Reference Network Model (Addendum to TSB-100-A).pdf》由会员分享，可在线阅读，更多相关《TIA TSB-100-A-1-2006 Wireless Reference Network Model (Addendum to TSB-100-A).pdf（30页珍藏版）》请在麦多课文档分享上搜索。

1、 TSB-100-A-1 E APPROVED: JANUARY 1, 2006 REAFFIRMED: JUNE 21, 2012 TSB-100-A-1 E January 2006Wireless Reference Network Number NOTICE TIA Engineering Standards and Publications are designed to serve the public interest through eliminating misunderstandings between manufacturers and purchasers, facil

2、itating interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for their particular need. The existence of such Standards and Publications shall not in any respect preclude any member or non-member of TIA from manu

3、facturing or selling products not conforming to such Standards and Publications. Neither shall the existence of such Standards and Publications preclude their voluntary use by Non-TIA members, either domestically or internationally. Standards and Publications are adopted by TIA in accordance with th

4、e American National Standards Institute (ANSI) patent policy. By such action, TIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication. This Standard does not purport to address all safety problems associated wi

5、th its use or all applicable regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations before its use. (From Project No. 3-4463-AD1E, formulated under the cognizance

6、 of the TIA TR-45 Mobile (b) there is no assurance that the Document will be approved by any Committee of TIA or any other body in its present or any other form; (c) the Document may be amended, modified or changed in the standards development or any editing process. The use or practice of contents

7、of this Document may involve the use of intellectual property rights (“IPR”), including pending or issued patents, or copyrights, owned by one or more parties. TIA makes no search or investigation for IPR. When IPR consisting of patents and published pending patent applications are claimed and calle

8、d to TIAs attention, a statement from the holder thereof is requested, all in accordance with the Manual. TIA takes no position with reference to, and disclaims any obligation to investigate or inquire into, the scope or validity of any claims of IPR. TIA will neither be a party to discussions of an

9、y licensing terms or conditions, which are instead left to the parties involved, nor will TIA opine or judge whether proposed licensing terms or conditions are reasonable or non-discriminatory. TIA does not warrant or represent that procedures or practices suggested or provided in the Manual have be

10、en complied with as respects the Document or its contents. If the Document contains one or more Normative References to a document published by another organization (“other SSO”) engaged in the formulation, development or publication of standards (whether designated as a standard, specification, rec

11、ommendation or otherwise), whether such reference consists of mandatory, alternate or optional elements (as defined in the TIA Engineering Manual, 4thedition) then (i) TIA disclaims any duty or obligation to search or investigate the records of any other SSO for IPR or letters of assurance relating

12、to any such Normative Reference; (ii) TIAs policy of encouragement of voluntary disclosure (see Engineering Manual Section 6.5.1) of Essential Patent(s) and published pending patent applications shall apply; and (iii) Information as to claims of IPR in the records or publications of the other SSO sh

13、all not constitute identification to TIA of a claim of Essential Patent(s) or published pending patent applications. TIA does not enforce or monitor compliance with the contents of the Document. TIA does not certify, inspect, test or otherwise investigate products, designs or services or any claims

14、of compliance with the contents of the Document. ALL WARRANTIES, EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS NONINFRINGEME

15、NT OF ANY THIRD PARTYS INTELLECTUAL PROPERTY RIGHTS. TIA EXPRESSLY DISCLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION, OR THE SAFETY OR HEALTH EFFECTS OF

16、THE CONTENTS OR ANY PRODUCT OR SERVICE REFERRED TO IN THE DOCUMENT OR PRODUCED OR RENDERED TO COMPLY WITH THE CONTENTS. TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL

17、INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUC

18、H DAMAGES. THE FOREGOING NEGATION OF DAMAGES IS A FUNDAMENTAL ELEMENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS. TSB 100-A-1 E 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 3

19、9 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 TR-45 Wireless NRM i Contents CONTENTS LIST OF FIGURES. iii PREFACE . iii REVISION HISTORY iii 1. PURPOSE AND SCOPE 1 1.1 References.1 2. REFERENCE MODELS.4 2.1 TR-45 Wireless Network Reference Model4 2.1.1 Network Entities.6 2.1.2 Ref

20、erence Points.13 TSB 100-A-1 E 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 List of Figures ii TR-45 Wireless NRM LIST OF FIGURES Figure 2.1 TR-45 Wireless Network Reference

21、Model5 PREFACE This TR-45 Wireless Network Reference Model depicts circuit-mode and packet-mode operation. REVISION HISTORY Revision Date Description 0 March 1998 TSB100 initial publication. 1 March 2001 TSB100-A publication. 2 October 2005 TSB 100-A-1 publication TSB 100-A-1 E 1 2 3 4 5 6 7 8 9 10

22、11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 TR-45 Wireless NRM 1 Purpose And Scope 1. PURPOSE AND SCOPE This document recommends the basic TR-45 Wireless Network Reference Model. 1.1 Informative

23、 References ANSI-41 TIA/EIA-41-D, Cellular Radiotelecommunications Intersystem Operations, December, 1997. ANSI-93 TIA/EIA-93-B, Cellular Radio Telecommunications Ai - Di Interface Standard, December, 1997. ANSI-95 TIA/EIA-95-B, Mobile Station Base Station Compatibility Standard for Wideband Spread

24、Spectrum Cellular Systems; Telecommunications Industry Association; February 1999. TSB74, Support for 14.4 kbps Data Rates and PCS Interaction for Wideband Spread Spectrum Cellular Systems, December, 1995. ANSI-124 TIA/EIA-124-C, Wireless Radio Telecommunications Intersystem Non-Signaling Data Commu

25、nications DMH (Data Message Handler), September 2000. ANSI-136 TIA/EIA-136-B, TDMA Third Generation Wireless, Rev. B, March 2000. ANSI-553 TIA/EIA-553-A, Mobile Station - Land Station Compatibility Specification; November 1999. ANSI-634 TIA/EIA-634-B, MSC - BS Interface for Public Wireless Communica

26、tions Systems, April 1999. IS-658 TIA/EIA/IS-658, Data Services Interworking Function Interface for Wideband Spread Spectrum Systems, July, 1996. TIA/EIA/IS-658-1, Data Services Interworking Function Interface for Wideband Spread Spectrum Systems - Addendum 1, April, 1999. IS-683 TIA/EIA/IS-683-A, O

27、ver-The-Air Service Provisioning of Mobile Stations in Spread Spectrum Systems, June 1998. IS-725 TIA/EIA/IS-725-A, Cellular Radiotelecommunications Intersystem Operations - Over-The-Air Service Provisioning (OTASP) GPRS Tunneling Protocol (GTP) across the Gn and Gp interface, 2004. TS 29.061, Inter

28、working between the Public Land Mobile Network (PLMN) supporting packet based service and Packet Data Networks (PDN), 2004. TSB 100-A-1 E 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57

29、58 59 60 Reference Model 4 TR-45 Wireless NRM 2. REFERENCE MODELS Reference models are a graphical tool used to visualize, structure, and describe certain complex subjects. A few such models are widely used in the TR-45 wireless standards. 2.1 TR-45 Wireless Network Reference Model Figure 2.1 presen

30、ts the network entities and associated reference points that comprise a wireless network. The network entities are represented by squares, triangles and rounded corner rectangles; the reference points are represented by circles. The network reference model in this document is the compilation of seve

31、ral reference models currently in use in TIA wireless standards. Note the following: The network reference model is a functional block diagram. A network entity represents a group of functions, not a physical device. For example, a Mobile Switching Center (MSC) is a physical device; it comprises fra

32、mes, shelves, circuit packs, etc. The physical device may comprise a single network entity such as the MSC, or it may comprise some combination such as the MSC, the Visitor Location Register (VLR), the Home Location Register (HLR), and the Authentication Center (AC). The physical realization is an i

33、mplementation issue; a manufacturer may choose any physical implementation of network entities, either individually or in combination, as long as the implementation meets the functional requirements. Sometimes, for practical reasons, the functional network entity is a physical device. The Mobile Sta

34、tion (MS) is an excellent example. A reference point is a conceptual point that divides two groups of functions. It is not necessarily a physical interface. A reference point only becomes a physical interface when the network entities on either side of it are contained in different physical devices.

35、 A “Collective Entity” contains encompassed network entities that are an instance of the collective. A “Composite Entity” contains encompassed network entities that are part of the composite. TSB 100-A-1 E 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 3

36、5 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 TR-45 Wireless NRM 5 Reference Model Figure 2.1 TR-45 Wireless Network Reference Model UvVehicle KeSpecific Network Entity Composite Entity HInterface Reference PointCollective x Interface to Another Instance of Same Networ

37、k EntityLine Intersection T8T7VEGDEIRFACNQ CBS VLRBMOT FAi1QD1TT TTTT5 6211N39 T4SME3M1M2MZA teMSUIi U U rR TATERTEPSTW v DCE DiAiDiHAAAPDSN P i IK CDISCDRP J CDCPCDGPIAPDCdeO2OSMWNO1AquateS TEISDNWNHAPCFAquinteU mBTSAbisA P iPDNR xTEMTR TEMTMTS TETAR TEmmmMEBSCLPDE E ?NPDB ZHL1Z2Z3VMSCSCXPiE5PDEE3M

38、SCE9SCPIP SNE12DiCRDBE1MPCESNEESNEESMEE2YIWWPSW1Z4 Z5 IIF GSM/GPRSTSB 100-A-1 E 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 Reference Model 6 TR-45 Wireless NRM AAA Authenti

39、cation, Authorization and Accounting MC Message Center AC Authentication Center ME Mobile Equipment BS Base Station MPC Mobile Position Center BSC Base Station Controller MS Mobile Station BTS Base Transceiver System MSC Mobile Switching Center CDCP Call Data Collection Point MT Mobile Terminal CDGP

40、 Call Data Generation Point MWNE Managed Wireless Network EntityCDIS Call Data Information Source NPDB Number Portability DataBase CDRP Call Data Rating Point OSF Operations System Function CF Collection Function OTAF Over-The-Air Service Provisioning Function CRDB Coordinate Routing Data Base PCF P

41、acket Control Function CSC Customer Service Center PDE Position Determining Entity DCE Data Circuit Equipment PDN Packet Data Network DF Delivery Function PDSN Packet Data Serving Node EIR Equipment Identity Register PSTN Public Switched Telephone Network ESME Emergency Services Message Entity SCP S

42、ervice Control Point ESNE Emergency Services Network Entity SN Service Node HA Home Agent SME Short Message Entity HLR Home Location Register TA Terminal Adapter IAP Intercept Access Point TE Terminal Equipment IIF Interworking and Interoperability Function UIM User Identity Module IP Intelligent Pe

43、ripheral VLR Visitor Location Register ISDN Integrated Services Digital Network VMS Voice Message System IWF Interworking Function WNE Wireless Network Entity LPDE Local Position Determining Entity WPSC Wireless Priority Service Center LNS L2TP Network Server 2.1.1 Network Entities Each Network Enti

44、ty may be a physical device, may form part of a physical device, or may be distributed over a number of physical devices. See Section 2.1.2 for the definition of the Reference Points associated with each Network Entity. Authentication, Authorization and Accounting (AAA) The AAA is an entity that pro

45、vides Internet Protocol functionality to support the functions of Authentication, Authorization and Accounting. Authentication Center (AC) The AC is an entity that manages the authentication information related to the MS. The AC may, or may not be located within, and be indistinguishable from an HLR

46、. An AC may serve more than one HLR. Base Station (BS) A BS is an entity that provides the means for MSs to access network services using radio. It includes a BSC and a BTS. TSB 100-A-1 E 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 4

47、1 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 TR-45 Wireless NRM 7 Network Entities Base Station Controller (BSC) The BSC is an entity that provides control and management for one or more BTSs. The BSC exchanges messages with both the BTS and the MSC. Traffic and signaling concerned wit

48、h call control, mobility management, and MS management may pass transparently through the BSC. Base Transceiver System (BTS) The BTS is an entity that provides transmission capabilities across the Umreference point. The BTS consists of radio devices, antenna and equipment. Call Data Collection Point

49、 (CDCP) The CDCP is the entity that collects the ANSI-124 format call detail information. Call Data Generation Point (CDGP) The CDGP is an entity which provides call detail information to the CDCP in ANSI-124 format. This may be the entity which converts call detail information from a proprietary format into the ANSI-124 format. All information from the CDGP to the CDCP mustshould be in ANSI-124 format. Call Data Information Source (CDIS) The CDIS is an entity that can be the source of call detail information. This information