SANS 10120-2 LD-1982 Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 2 Project specification Section LD Sew.pdf

《SANS 10120-2 LD-1982 Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 2 Project specification Section LD Sew.pdf》由会员分享，可在线阅读，更多相关《SANS 10120-2 LD-1982 Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 2 Project specification Section LD Sew.pdf（5页珍藏版）》请在麦多课文档分享上搜索。

1、 Collection of SANS standards in electronic format (PDF) 1. Copyright This standard is available to staff members of companies that have subscribed to the complete collection of SANS standards in accordance with a formal copyright agreement. This document may reside on a CENTRAL FILE SERVER or INTRA

2、NET SYSTEM only. Unless specific permission has been granted, this document MAY NOT be sent or given to staff members from other companies or organizations. Doing so would constitute a VIOLATION of SABS copyright rules. 2. Indemnity The South African Bureau of Standards accepts no liability for any

3、damage whatsoever than may result from the use of this material or the information contain therein, irrespective of the cause and quantum thereof. SABS 0120 : Fart 2 SecLion LD-1382 Sewers Clause 1 . 2 . 3 . 3.1 3.2 3.2.1 3.2.2 PART 2 : PROJECT SPEClFICATION SECTION LU CONTENTS Page Number ESSENTIAL

4、 PROJECT SPECIFICATlON CLAUSES 1 ESSENTIAL DATA . 1 ADDITIONAL CLAUSES 1 General 1 Normal Projects 1 Hjqh strength or special quality vitrified clay pipes . Elastomeric joints 3.2.3 Concxete and mortar of dolomitic aqgregate . 3.2.4 Acceptable bows in AC pipes on flat grades . . 3.2.5 Marker posts 3

5、.2.6 Channel layouts in manholes 3.2.7 Lowering of existing manholes 3.2.P Minox changes to level of manhole covers . . Connectinq sewers Marking of positions of pipe ends . Bedding and infiltration at manholes Testing of manholes for watertiyhtness Other PSLU clauses Prestige Projects . Subeconomic

6、 Projects Labour-Based Projects . First Revision November 1982 This section of the code supersedes SABS 0120 : Part 2 : Section LD-1980 Approved by the COUNClL OF THE SOUTH AEHLCAN BUREAU OF STANDARDS SABS 0120 : Part 2 Section LD-1982 Sewers SARS 1200 LD : SEWERS NOTE: a) Number the PStU clauses in

7、 Portion 2 of the project specification in the sequence in which the clauses to which they relate appear in SABS 1200 LD. b) The clause number(s) given at the beginning or after the heading of a clause is/are, unless otherwise stated, the number(s) of the relevant clause(s) of SABS 1200 LD. ESSENTIA

8、L PROJECT SPECIFICATION CLAUSES Set out suitable clauses in Portion 2 of the project specification to provide the essential informatio, as follows: a) (Subclause 3.5.3) Where prefabricated AC manholes will be accepted, state the requirements. h) (Subclause 5.6.4.3) If brick manholes are to be plaste

9、red, include a suitable clause. (See also Subclauses 1.1.3 of Section LD of Part 3 and 3.1.8.4 of Section LD of Part 5 of the code.) ESSENTIAL DATA The availability of certain essential data may affect the prices tendered. Except where such data have been given in the schedule, set out suitable clau

10、ses covering items such as the following in Portion 2 of the project specification: a) (Subclause 3.1.l.2) State the requirements for vitrified clay pipes that are to have a crushing strength of at least 45 kN per metre. (See also 3.2.1 below.) b) (Subclause 3.1.2) When relevant, state or schedule t

11、he class of reinforced concrete pipe to be supplied. c) (Subclauses 3.5.4 and 3.5.5) If reinforced concrete manholes, etc., are required to be manufactured from dolomitic aggregate, or if dolomitic sand is to be used for benching or mortar, set out the requirements. (See also 3.2.3 below and Subclau

12、se 1.1.3 of Section LD of Part 3 of the code.) d) (Suhclause 3.6) Where marker posts are required, state the requirements and include one or more suitable items in the schedule. (See also 3.2.5 below.) e) (Subclause 5.7) Designate the lengthls) of the pipeline(s1 to be encased in concrete, and state

13、 (or give on a drawing) the thickness of concrete required round the pipes. f) (Suhclause 5.9) For connecting sewers 1) state (or give on a drawing or in the schedule) the diameter of the connecting pipe and the main pipe, and the position and depth of the connection to the main sewer; and 2) where

14、the relative positions and invert levels at the end of the connecting sewer on an erf boundary and of the main sewer are such that neither a direct connection nor a sloping drop connection (as shown on Drawings LD-7 and LW8 of SABS 1200 LD) is practicable, set out alternative requirements for a suit

15、able drop connection, and schedule the connection accordingly. (See also Subclauses 1.1.5 and 1.3.7 of Section LD of Part 3 of the code.) ADDITIONAL CLAUSES GENERAL. Where it is necessary to amplify or otherwise to vary the terms of SABS 1200 LD to render them suitable for use in projects to be carr

16、ied out in particular locations or under particular circumstances, include in the project specification clauses dealing with matters other than those covered by Clauses 1 and 2. NORMAL PROJECTS NOTE: To meet requirements imposed by various norms of economic development, projects are classified as no

17、rmal, prestige, subeconomic, and labour-based projects (see Clause 4 of Section 0 of Part 3 of the code) . Hightrength or Special Quality Vitrified Clay Pipes (Subclause 3.1.1). Designate the portions of the - pipeline for which pipes are required that a) have been manufactured to tolerances that ar

18、e closer than normal, or bi have higher crushing strengths, or C) are to be subjected to special tests to prove their suitability or the suitability of their oitits for we in conveying strong chemical effluents. (See also Subclauses 2.2.2 arid 2.2.3 of Section LD of Part 3 of the code. Elastomeric J

19、oints (Subclauses 3.1.1 and 7.1). Where the provision of “suitable approved flexible joints“ means that special jointing or elastomeric materials are required that must be subjected to chemical tests, state the requirements. (See also Subclauses 1.3.1 and 1.3.10.1 of Section LD of Part 3 of the code

20、. ) Concrete and Mortar of Dolomitic Aggregate (Subclauses 3.1.2, 3.5.2, 3.5.4, and 3.5.5). Although it is desirable to use dolomitic materials, their use is uneconomic in many parts of the country because of the cost of transport. There is for instance no dolomitic stone in Natal. Where use of dolo

21、mitic aggregate is not economic, set out altarnative requirements in a suitable clause or schedule AC or vitrified clay pipes. Acceptable Bows in AC Pipcs on Flat Grades (Subclauscs 3.1.3 and 5.2.2). Unless, as in Subclause 5.2.2 of SAAS 1200 LD, bowed pipes are required to be laid with bows horizon

22、Eal, where grades are so nearly flat that the bow or maximum deflection permitted in terms of SABS 819 may cause pooling of sewage and lead to septic problems, jnclude a clause such as the following: PSLD 1.1 Acceptable bows in AC pipes (Subclause 3.1.3). Except that the deviatior from straightness

23、shall not exceed 5 mm per 2 m of length, AC sewer pipes shall comply with the reluvant requirrmcnts of SABS 819). Marker Posts (Subclause 3.6). Where Y-section fencinq standards firmly bedded into concrete blocks are - accept.ahle as marker posts, include a clause such as the following: (See also Z.

24、l(d) above arid 3.2.10 below. ) PSLD 1.2 !darker posts (Subclause 3.6). Marker posts shall be manufactured from 1,5 m long Y- section fencing standards split for 75 mni at the base and cast into prescribed mix 20 rectalrgular concrete blocks of dimensions at least 200 mm X 200 mm X 100 mm. 1) Asbest

25、os ccmcnt sewer pipes. SABS 0120 : Part 2 Section LW1982 Sewers 3.2.6 3.2.7 3.2.8 3.2.9 3.2.10 3.2.11 3.2.12 3.2.33 3.3 3.4 3.5 Channel Layouts in Manholes (Subclause 5.6.ltd). Specify details or show layouts on drawings. Drawing LD-4 of SARS 1200 LD shows some typical layouts. Lowering of Existing

26、Manholes (Subclause 5.8). Where the level of the top of an existing manhole is to be lowered to the extent that the reducer slab or sloping portion of the manhole 56 affected, schedule the items and quantities for each type of work required. Alternatively, schedule a lump sum item and srt out in the

27、 project specification full details for each manhole of the same design and dimensions or show such details on drawings. Minor Changes to Level of Manhole Covers (Subclause 5.8). Where manhole covers are to be raised or lowered by 100 mm or less, consider a clause such as the following: PSLD 2.1 Adj

28、usting level of manhole covers. Each manhole cover and frame shall be removed and the height of the chamber walls reduced or increased as necessary. The cover and frame shall be re-set on a 1:2 cement mortar bed (consisting of one part of cement and two parts of fine sand) in such a manner that the

29、top of the cover is flush with the adjacent finished compacted bitumen surface of the road. After the fittings have been re-set, they shall be cleaned of deleterious matter and painted with bitumen on the surfaces that will be in contact with the road surfacing, and freshly prepared premix shall be

30、hand-tamped around them. The finished tamping shall be dense, shall blend rrith the rest of the surfacing, and shall present good riding qualities. Re-setting will be measured by the number of manhole covers lowered or raised by up to 100 nun. The rate shall cover the cost of equipment, materials, l

31、oading, transportation, heating, mixing, supervision, and labour required to re-set, including locating, marking, excavating, disposal of premix, cleaning, painting of metal with bitumen, supply of fresh premix, tamping to required density and levels, and making good to surrounding surfacing. Connec

32、tin Sewers (Subclause 5.9.1). State the locations of er connections in relation to existing fences an: bo&xries if these data are not shown on the drawings. Marking of Positions of Pipe Ends (Subclause 5.9.2). If it is required that the positions of the ends of connections be marked in the field dur

33、ing construction, include a clause such as the follwing: (See also 3.2.5 above.) PSLD 2.2 Placing of marker posts (Subclause 5.9.2). A marker post shall be placed a: the end of each connection vertically above its centre line at the time of backfilling and while the end nf the pipe is still exposed.

34、 The post shall protrude 0,15 m above qround level or as otherwise ordered. The depth of the invert level below qround level shall be shown, legibly painted in black letters on a yellow background, on one side of the top of the post. Bedding and Infiltration at Manholes (See Subclause 2.2.9 of Secti

35、on LD of Part 3 and Subclause 3.1.8 of Section LD of Part 5 of the code). Where infiltration is likely because of high pressure: at the base of a deep manhole in a high water table area, consider a clause such as the following: PSLD 2.3 Special bedding around manholes. The Contractor shall provide a

36、 granular 1,edding around the outside of the manhole at . . . . . . . as shown on Drawing LD-3.12). The rate for such a manhole shall cover the additional excavation, supply, and placing of bedding material, backfilling, and disposal of surplus material, in addition to the items specified in Subclau

37、ses 8.2.3-8.2.5 of SABS 1200 LD. Testing of Manholes for Watertightness (Subclause 7.2.6). Except in areas where the water table is high and filtration into manholes likely, tests on *.he watertightness of manholes are seldom required. Rendering a precast concrete manhole watertight is relatively ea

38、sy and inexpensive (See Drawing LD-5 of SABS 1200 LD), but rendering a brick manhole completely watertight may prove to be more expensive than is warranted. Subclause 5.6.4.3 of SABS 1200 LD provides for the inside walls to be plastered if specifically scheduled or specified, but makes no provision

39、for protection against infiltration. Where complete watertightness is required, include a project specification clause that covers the following: a) ?he outside of the brick manhole is to be given two coats of plaster, each coat consisting of 1:3 cement mortar at least 10 mm thick, and the outer coa

40、t being steel-trowelled true and smooth so as to make the walls watertight. b) The following test is to be carried out on the completed manhole before it is backfillod in the case of a brick manhole, and after backfilling in the case of a precast manhole: The manhole shall be completely filled with

41、water and allowed to stand for 24 h. At the end of this period enough water shall be added to refill the manhole and in the subsequent period of 34 h the water level shall not drop by more than 75 mm per metre of depth of the manhole measured from the channel anvert to the underside of the concrete

42、cover slab. C) Rectification, if necessary, is to be carried out at the Contractors expense. d) A payment item is to be included to cover such a test. Other PSLD Clauses. See Subclause 1.3 of Section L0 of Part 3 of the code. PRESTIGE PROJECTS. Include in the project specification clauses dealing wi

43、th those portions of the works that require special workmanship and tolerances or testing or other action, SUBECONUMIC PROJECTS. Until a suitable standardized specification has been published, use SABS 1200 LA), when appropriate, or include in the project specification requirements coverin? material

44、s, construction, and tolerances that are less stringent than those given in SABS 1200 LD. LABOUR-BASED PROJECTS. Until a suitable standardized specification has been published, use SABS l200 LA), when appropriate, and state which sub clause of SABS 1200 LA will not be applicable to the project (see Subclause 3.4 of Section LA). 2) See Drawing LD-3.1 in Section LD of Part 3 of the code. 3) Urban services (small works) (In course of preparation).