SAE MA 5405 2-2007 SPLICE FIBER OPTIC AEROSPACE INTER-CONNECT (MIL-PRF-29504 TERMINI)《航空航天内连接纤维光学绞接件(MIL-PRF-29504界限)》.pdf

《SAE MA 5405 2-2007 SPLICE FIBER OPTIC AEROSPACE INTER-CONNECT (MIL-PRF-29504 TERMINI)《航空航天内连接纤维光学绞接件(MIL-PRF-29504界限)》.pdf》由会员分享，可在线阅读，更多相关《SAE MA 5405 2-2007 SPLICE FIBER OPTIC AEROSPACE INTER-CONNECT (MIL-PRF-29504 TERMINI)《航空航天内连接纤维光学绞接件(MIL-PRF-29504界限)》.pdf（2页珍藏版）》请在麦多课文档分享上搜索。

1、 METRIC AEROSPACE STANDARD SPLICE, FIBER OPTIC, AEROSPACE INTER-CONNECT (MIL-PRF-29504 TERMINI) MA5405/2 Copyright 2007 SAE International All rights reserved. No part of this publication may be reproduced, stored in a retrieval system or transmitted, in any form or by any means, electronic, mechanic

2、al, photocopying, recording, or otherwise, without the prior written permission of SAE. TO PLACE A DOCUMENT ORDER: Tel: 877-606-7323 (inside USA and Canada) Tel: 724-776-4970 (outside USA) Fax: 724-776-0790 Email: CustomerServicesae.org SAE WEB ADDRESS: http:/www.sae.org ISSUED 2007-10THIRD ANGLE PR

3、OJECTION CUSTODIAN: SAE AE-8/AE-8C2 FEDERAL SUPPLY CLASS4030 MA5405/2 SHEET 1 OF 2 PROCUREMENT SPECIFICATION: NONESAE TechnicalStandards Board Rules provide that: “This report is published by SAE toadvance thestate of technical andengineering sciences. Theuse of thisreportis entirely voluntary, andi

4、ts applicabilityandsuitability forany particularuse,including any patent infringement arising therefrom, is thesole responsibility oftheuser.” SAE reviews each technical report at least every five yearsat which time it may be reaffirmed, revised, orcancelled.SAE invites yourwritten commentsandsugges

5、tions.RATIONALE NEW DOCUMENT TO SUPPLEMENT SAE MA5405 FIBER OPTIC SPLICES. NOTICE FOR REQUIREMENTS FOR PROCURING THE PRODUCT DESCRIBED HEREIN SHALL CONSIST OF THIS SPECIFICATION SHEET AND THE LATEST ISSUE OF: SAE MA5405. FIGURE 1 - DIMENSIONS AND CONFIGURATION METRIC AEROSPACE STANDARD SPLICE, FIBER

6、 OPTIC, AEROSPACE INTER-CONNECT (MIL-PRF-29504 TERMINI) MA5405/2 SHEET 2 OF 2 NOTES: 1. DIMENSIONS ARE IN INCHES. METRIC EQUIVALENTS IN PARENTHESES ARE FOR GENERAL INFORMATION ONLY AND ARE BASED UPON 1.00 = 24.4 MM. 2. TERMINUS ALIGNMENT SLEEVE, PIN AND SOCKET TERMINI PART NUMBERS SHOWN FOR REFERENC

7、E ONLY AND ARE NOT SUPPLIED WITH THE SPLICE ASSEMBLY. REFERENCE MIL-PRF-29504/4 AND /5 FOR APPROPRIATE PART NUMBER SELECTION. 3. FIBER OPTIC CABLE: SINGLE MODE AND MULTIMODE. ACCOMMODATES ALL MIL-PRF-29504/4 AND /5 SIZES AND STYLES. 4. SPLICE CONFIGURATION IS OPTIONAL WITHIN THE DIMENSION ENVELOPE S

8、PECIFIED IN FIGURE 1. 5. THIS SPLICE RECOMMENDED FOR IN-LINE PRODUCTION USE, NOT FOR FIELD REPAIR. REQUIREMENTS: 1. DESIGN AND CONSTRUCTION: SEE FIGURE 1. 2. MATERIAL AND FINISH: SPLICE HOUSING: HI-GRADE ENGINEERING THERMOPLASTIC IN ACCORDANCE WITH SAE AIR4567 AND MEET THE PERFORMANCE REQUIRMENTS OF

9、 SAE MA5405. RETENTION CLIPS: BERYLLIUM COPPER. SHRINK TUBING: POLYOLEFIN IN ACCORDANCE WITH SAE AMS-DTL-23053/4-203-0. 3. OPERATING TEMPERATURE: 150 C. 4. QUALIFICATION INSPECTION: IN ACCORDANCE WITH SAE MA5405. 5. INSERTION LOSS: IN ACCORDANCE WITH TABLE V, MIL-PRF-29504/4 AND /5. 6. CABLE PULLOUT

10、 FORCE: 22 LB. 7. FIBER OPTIC TOOLS; ALL TOOLS REQUIRED TO ASSEMBLE THE SPLICE SHALL BE LISTED IN THE ASSEMBLY INSTRUCTION. 8. INSERTION AND REMOVAL TOOL; MIL-I-81969/14-03 PART OR IDENTIFYING NUMBER (PIN): MA5405/ 2 -001 BASIC PART NUMBER SPECIFICATION SHEET DASH NUMBER QUALIFICATION: 1. SEE SAE MA5405