SAE MA 5405 1A-2009 Splice Fiber Optic Aerospace Inter-connect Graded Index 100 140 172 Cable Size《航空器之间连接光纤铰接处 分等级索引100 140 172电缆尺寸》.pdf

《SAE MA 5405 1A-2009 Splice Fiber Optic Aerospace Inter-connect Graded Index 100 140 172 Cable Size《航空器之间连接光纤铰接处 分等级索引100 140 172电缆尺寸》.pdf》由会员分享，可在线阅读，更多相关《SAE MA 5405 1A-2009 Splice Fiber Optic Aerospace Inter-connect Graded Index 100 140 172 Cable Size《航空器之间连接光纤铰接处 分等级索引100 140 172电缆尺寸》.pdf（2页珍藏版）》请在麦多课文档分享上搜索。

1、 METRIC AEROSPACE STANDARD (R) SPLICE, FIBER OPTIC, AEROSPACE INTER-CONNECT, GRADED INDEX 100/140/172 CABLE SIZE MA5405/1Copyright 2009 SAE International All rights reserved. No part of this publication may be reproduced, stored in a retrieval system or transmitted, in any form or by any means, elec

2、tronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of SAE. TO PLACE A DOCUMENT ORDER: Tel: 877-606-7323 (inside USA and Canada) Tel: +1 724-776-4970 (outside USA) Fax: 724-776-0790 Email: CustomerServicesae.org SAE WEB ADDRESS: http:/www.sae.org ISSUED 20

3、00-06REVISED 2009-10THIRD ANGLE PROJECTION CUSTODIAN: AE-8/AE-8C2 REV.A FEDERAL SUPPLY CLASS 4030 MA5405/1SHEET 1 OF 2 REV. A PROCUREMENT SPECIFICATION: MA5405SAE Technical Standards Board Rules provide that: “This report ispublishedby SAE toadvance thestate of technicalandengineering sciences. Theu

4、se ofthis report is entirely voluntary, andits applicability and suitability forany particular use,including any patent infringement arising therefrom, isthe soleresponsibilityofthe user.”SAE reviews eachtechnicalreport at least every five years at which time itmay bereaffirmed, revised, orcancelled

5、. SAE invites yourwrittencomments andsuggestions. SAE values your input. To provide feedbackon this Technical Report, please visit http:/www.sae.org/technical/standards/MA5405/1ARATIONALE TECHNICAL CHANGES MADE TO REFLECT USER REQUIREMENTS. NOTICE THE REQUIREMENTS FOR PROCURING THE FIBER OPTIC SPLIC

6、ES DESCRIBED HEREIN SHALL CONSIST OF THIS SPECIFICATION AND THE LATEST ISSUE OF: SAE MA5405. FIGURE 1 - FIBER OPTIC SPLICE CONFIGURATION TABLE 1 - MA5405/1 DIMENSIONS PART NUMBER UNITS A B C D E F MA5405/1-001 MILLIMETERS 82.6 0.8 69.9 0.4 3.76 0.05 19.05 0.025 1.91 0.13 2.97 0.025 INCHES 3.250 0.03

7、2 2.750 0.015 0.148 0.002 0.750 0.001 0.075 0.005 0.117 0.001 REQUIREMENTS 1. DIMENSIONS: DIMENSIONS ARE IN ACCORDANCE WITH TABLE 1. INCH UNITS ARE PROVIDED FOR INFORMATION ONLY. 2. MATERIALS: MATERIALS ARE SPECIFIED IN ENGINEERING DRAWINGS. IF A CHANGE IN MATERIAL OCCURS AFTER INITIAL QUALIFICATION

8、 HAS BEEN DEMONSTRATED, THE MANUFACTURER IS REQUIRED TO REQUEST A CHANGE APPROVAL FROM THE QUALIFYING ACTIVITY. 3. MARKING: PART NUMBER SHALL BE ON THE PACKAGE. MANUFACTURERS SYMBOL IN ACCORDANCE WITH AIR1353 SHALL BE ON THE SPLICE. 4. ASSEMBLY INSTRUCTIONS: ASSEMBLY INSTRUCTIONS IN ACCORDANCE WITH

9、MA5405. 5. FIBER OPTIC CABLE: AS5382/1 OR EQUIVALENT 6. MAXIMUM OPERATING TEMPERATURE: 150 C 3 C. 7. INITIAL INSERTION LOSS: 0.5 DB. 8. TENSILE STRENGTH: CABLE PULLOUT STRENGTH 222 N (50 LB) MINIMUM. 9. HEAT AGING: +150, + 0 - 2 C. Copyright SAE International Provided by IHS under license with SAENo

10、t for ResaleNo reproduction or networking permitted without license from IHS-,-,-METRIC AEROSPACE STANDARD MA5405/1 SHEET 2 OF 2 REV. A (R) SPLICE, FIBER OPTIC, AEROSPACE INTER-CONNECT, GRADED INDEX 100/140/172 CABLE SIZE 10. FLUID IMMERSION: FROM TABLE 4 OF MA5405 LUBRICATING OIL SHALL BE FLUID A O

11、R H, TURBINE ENGINE FUEL SHALL FLUID D OR K, HYDRAULIC FLUID SHALL BE FLUIDS B OR N, AND ANTI-ICING FLUID SHALL BE FLUIDS E OR F. 11. QUALIFICATION: QUALIFICATION SHALL BE IN ACCORDANCE WITH MA5405. 12. PART NUMBER: MA5405 /1 -001 I I I I I I_ DASH NUMBER I I I I_ DETAIL SPECIFICATION NUMBER I I_ BA

12、SIC SPECIFICATION NUMBER APPLICATION NOTES: 1. SPLICE MAY BE USED FOR FIELD REPAIR. SPECIFICATION NOTES: 1. THE CHANGE BAR (l) LOCATED IN THE LEFT MARGIN IS FOR THE CONVENIENCE OF THE USER IN LOCATING AREAS WHERE TECHNICAL REVISIONS, NOT EDITORIAL CHANGES, HAVE BEEN MADE TO THE PREVIOUS ISSUE OF THIS DOCUMENT. AN (R) SYMBOL TO THE LEFT OF THE DOCUMENT TITLE INDICATES A COMPLETE REVISION OF THE DOCUMENT. Copyright SAE International Provided by IHS under license with SAENot for ResaleNo reproduction or networking permitted without license from IHS-,-,-