NAVY MIL-STD-3001-1-2001 PREPARATION OF DIGITAL TECHNICAL INFORMATION FOR MULTI-OUTPUT PRESENTATION OF TECHNICAL MANUALS (PART 1 OF 8 PARTS) [Superseded NAVY MIL-DTL-23618 H NAVY M618.pdf

《NAVY MIL-STD-3001-1-2001 PREPARATION OF DIGITAL TECHNICAL INFORMATION FOR MULTI-OUTPUT PRESENTATION OF TECHNICAL MANUALS (PART 1 OF 8 PARTS) [Superseded NAVY MIL-DTL-23618 H NAVY M618.pdf》由会员分享，可在线阅读，更多相关《NAVY MIL-STD-3001-1-2001 PREPARATION OF DIGITAL TECHNICAL INFORMATION FOR MULTI-OUTPUT PRESENTATION OF TECHNICAL MANUALS (PART 1 OF 8 PARTS) [Superseded NAVY MIL-DTL-23618 H NAVY M618.pdf（190页珍藏版）》请在麦多课文档分享上搜索。

1、MIL-STD-3001-1(AS)15 May 2001SUPERSEDING(See Section 6.)DEPARTMENT OF DEFENSESTANDARD PRACTICEPREPARATIONOFDIGITAL TECHNICAL INFORMATIONFORMULTI-OUTPUT PRESENTATIONOFTECHNICAL MANUALS(PART 1 OF 8 PARTS)AMSC A7194 AREA TMSSDISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimit

2、ed.NOT MEASUREMENTSENSITIVEProvided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-STD-3001-1(AS) ii FOREWORD 1. This eight-part standard establishes the requirements needed to prepare digital technical information for multi-output presentation of NAVAIR

3、 work package Technical Manuals (TMs). The technical content and mandatory style and format requirements contained in this eight-part standard can be used to develop and assemble complete TMs for aircraft weapon systems, aeronautical equipment, airborne weapons/equipment, and support equipment work

4、package technical manuals. The requirements are applicable for the output of paper technical manuals or for the display of page-oriented, scrollable and frame-based technical manuals on an Electronic Display System (EDS). 2. MIL-STD-3001-1 is Part 1 of 8 Parts and is incomplete without Parts 2 throu

5、gh 8. Part 1 contains general preparation requirements for the multi-output presentation of NAVAIR work package TMs. Appendix A of Part 1 contains matrixes that list all applicable technical content requirements for the development of complete TMs for aircraft weapon systems, aeronautical equipment,

6、 airborne weapons/equipment, and support equipment covering operation and maintenance at all maintenance levels through depot. Appendix B of Part 1 establishes the style, format, and front matter requirements necessary to assemble and print complete work package technical manuals (TMs) in a page-ori

7、ented format. Appendix C of Part 1 establishes presentation requirements for the display of frame-based and scrollable technical manuals. 3. MIL-STD-3001-2 through MIL-STD-3001-8 contain specific functional technical content requirements for the preparation of all NAVAIR work package TMs and revisio

8、ns. Parts 2 through 8 are identified below. MIL-STD-3001-2 Description, Principles of Operation, and Operation Data. MIL-STD-3001-3 Testing and Troubleshooting Procedures. MIL-STD-3001-4 Maintenance Information with IPB. MIL-STD-3001-5 Aircraft Wiring Information. MIL-STD-3001-6 Structural Repair In

9、formation. MIL-STD-3001-7 Periodic Maintenance Requirements. MIL-STD-3001-8 Separate Illustrated Parts Breakdown (IPB). 4. MIL-HDBK-3001, Guide to the General Style and Format of U.S. Navy Work Package Technical Manuals, complements this eight-part standard. MIL-HDBK-3001 provides Navy-preferred, no

10、nmandatory style and format requirements for the preparation of page-oriented, scrollable and frame-based work package technical manuals. 5. Beneficial comments (recommendations, additions, deletions) and any pertinent data which may be of use in improving this document should be addressed to: Comma

11、nder, Naval Air Warfare Center Aircraft Division, Code 414100B120-3, Highway 547, Lakehurst, NJ 08733-5100 by using the Standardization Document Improvement Proposal (DD Form 1426) appearing at the end of this document or by letter. Provided by IHSNot for ResaleNo reproduction or networking permitte

12、d without license from IHS-,-,-MIL-STD-3001-1(AS) CONTENTS PARAGRAPH PAGE iii FOREWORDii 1. SCOPE.1 1.1 Scope 1 2. APPLICABLE DOCUMENTS.1 2.1 General1 2.2 Government documents 1 2.2.1 Specifications, standards, and handbooks 1 2.2.2 Other Government documents and publications .3 2.3 Non-Government p

13、ublications 4 2.4 Order of precedence .5 3. DEFINITIONS.5 3.1 Acronyms used in this standard.5 3.2 Definitions of selected terms.7 3.2.1 Adjust.7 3.2.2 Alert.7 3.2.3 Align 7 3.2.4 American National Standards Institute (ANSI)7 3.2.5 Assembly 7 3.2.6 Block diagram.7 3.2.7 Built-in test equipment (BITE

14、) .7 3.2.8 Calibrate .7 3.2.9 Callout7 3.2.10 CALS raster7 3.2.11 Caution .7 3.2.12 Client area.8 3.2.13 Commercial and Government Entity Code (CAGEC).8 3.2.14 Comprehensibility .8 3.2.15 Computer Graphics Metafile (CGM).8 3.2.16 Continuous Acquisition Life-cycle Support (CALS) 8 3.2.17 Continuous t

15、one photographs or drawings .8 3.2.18 Copy freeze date 8 3.2.19 Data pane8 3.2.20 Department of Defense (DoD)8 3.2.21 Department of Defense Index of Specifications and Standards (DoDISS)8 3.2.22 Depot-level maintenance8 3.2.23 Digital graphics forms8 3.2.24 Direct image copy (DIC)8 3.2.25 Disassembl

16、e 9 3.2.26 Document Type Definition (DTD)9 3.2.27 Electronic display system (EDS).9 3.2.28 Electronic technical manual9 3.2.29 Expendable items 9 3.2.30 Footer .9 3.2.31 Formatting Output Specification Instance (FOSI) 9 3.2.32 Frame .9 Provided by IHSNot for ResaleNo reproduction or networking permi

17、tted without license from IHS-,-,-MIL-STD-3001-1(AS) CONTENTS PARAGRAPH PAGE iv 3.2.33 Frame-based interactive electronic technical manual (IETM)9 3.2.34 Functional diagram9 3.2.35 Graphic(s).9 3.2.36 Halftones 9 3.2.37 Header9 3.2.38 Horizontal (landscape) TM format9 3.2.39 Hotspot .10 3.2.40 Icon

18、10 3.2.41 Illustration.10 3.2.42 Index numbers and letters.10 3.2.43 Initial Graphics Exchange Specification (IGES).10 3.2.44 Inspect10 3.2.45 Institute of Electrical and Electronics Engineers (IEEE).10 3.2.46 Interactive electronic technical manual (IETM) .10 3.2.47 International Organization for S

19、tandardization (ISO) .10 3.2.48 Landscape mode 10 3.2.49 Legend10 3.2.50 Logic text10 3.2.51 Logic tree11 3.2.52 Logistics Management Information (LMI).11 3.2.53 Logistics Support Analysis (LSA).11 3.2.54 Lubricant 11 3.2.55 Maintenance level11 3.2.56 Maintenance step.11 3.2.57 Marginal copy .11 3.2

20、.58 Menu bar 11 3.2.59 National item identification number (NIIN).11 3.2.60 National stock number (NSN).11 3.2.61 Next higher assembly (NHA) .11 3.2.62 Nomenclature11 3.2.63 Note .11 3.2.64 Novice user.11 3.2.65 Overhaul.12 3.2.66 Part number (P/N)12 3.2.67 Pictorial12 3.2.68 Pre-screening 12 3.2.69

21、 Preventive maintenance (scheduled maintenance)12 3.2.70 Readability12 3.2.71 Reference designator12 3.2.72 Reliability, availability, maintainability (RAM) .12 3.2.73 Remove/install 12 3.2.74 Repair .12 3.2.75 Repair part 12 3.2.76 Replace.12 3.2.77 Requiring activity 13 3.2.78 Revision13 3.2.79 Sc

22、heduled maintenance (preventive maintenance)13 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-STD-3001-1(AS) CONTENTS PARAGRAPH PAGE v 3.2.80 Schematic diagram 13 3.2.81 Scroll13 3.2.82 Sentence .13 3.2.83 Service13 3.2.84 SGML document instance

23、 13 3.2.85 Shop replaceable assembly (SRA) 13 3.2.86 Source, maintenance, and recoverability (SM Technical Content Requirements (Work Package Concept). MIL-DTL-23618H Manuals, Technical: Periodic Maintenance Requirements, Preparation of. MIL-DTL-31000 Technical Data Packages. MIL-DTL-81218C Manuals,

24、 Technical: Aircraft Engine Intermediate and Depot Maintenance, Preparation of (Work Package Concept). MIL-DTL-81919C Manuals, Technical, Equipment Operation and/or Maintenance Instructions, Technical Content Requirements (Work Package Concept). MIL-DTL-81927C Manuals, Technical: Work Package Style,

25、 Format, and Common Technical Content Requirements; General Specification for (Work Package Concept). MIL-DTL-81928C Manuals, Technical: Aircraft Maintenance Instructions, Technical Content Requirements (Work Package Concept). Provided by IHSNot for ResaleNo reproduction or networking permitted with

26、out license from IHS-,-,-MIL-STD-3001-1(AS) 2 MIL-DTL-81929C Manuals, Technical: Illustrated Parts Breakdown Figures; Technical Content Requirements (Work Package Concept). MIL-DTL-85383A Manuals, Technical: Aircraft Structure Repair; Preparation of (Work Package Concept). MIL-PRF-28000 Digital Repr

27、esentation for Communication of Product Data: IGES Application Subsets and IGES Application Protocols. MIL-PRF-28001 Markup Requirements and Generic Style Specification for Exchange of Text and Its Presentation. MIL-PRF-28002 Raster Graphics Representation in Binary Format, Requirements for. MIL-PRF

28、-28003 Digital Representation for Communication of Illustration Data: CGM Application Profile. MIL-PRF-87268 Manuals, Interactive Electronic Technical - General Content, Style, Format, and User-Interaction Requirements. MIL-PRF-87269 Data Base, Revisable: Interactive Electronic Technical Manuals, fo

29、r the Support of. STANDARDS FEDERAL FED-STD-313 Material Safety Data, Transportation Data and Disposal Data for Hazardous Materials Furnished to Government Activities. DEPARTMENT OF DEFENSE MIL-STD-17 Mechanical Symbols. MIL-STD-100 Department of Defense Standard Practices for Engineering Drawings.

30、MIL-STD-1309 Definition of Terms for Testing, Measurement, and Diagnostics. MIL-STD-2073/1 Standard Practice for Military Packaging. HANDBOOKS DEPARTMENT OF DEFENSE MIL-HDBK-3001 Guide to the General Style and Format of U.S. Navy Work Package Technical Manuals. MIL-HDBK-9660 Handbook for DoD-Produce

31、d CD-ROM Products. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-STD-3001-1(AS) 3 (Copies of specifications, standards, and handbooks are available by request from Defense Automated Printing Service, Building 4D, DPM-DODSSP, 700 Robbins Ave., P

32、hiladelphia, PA 19111-5094.) 2.2.2 Other Government documents and publications. The following other Government documents and publications form a part of this document to the extent specified herein. PUBLICATIONS FEDERAL H4/H8 Cataloging Commercial and Government Entity (CAGE) Codes. Handbook Joint P

33、ub 1-02 Department of Defense Dictionary of Military and Associated Terms. NATIONAL ARCHIVES AND RECORDS ADMINISTRATION 29 CFR 1910.1200 Hazard Communication. 49 CFR 49 100-180 Transportation of Hazardous Materials. MARINE CORPS MCO P1200.7 Military Occupational Specialties Manual. NAVAL AIR SYSTEMS

34、 COMMAND NAVAIR 00-25-100 Technical Manual Program. NAVAIR 00-25-300 Naval Air Systems Command Technical Directives System. NAVAIR 00-25-700 Guide to the General Style and Format of Work Package Technical Manuals. NAVAIR 01-1A-23 Standard Maintenance Practices for Miniature / Microminiature (2M) Ele

35、ctronic Assembly Repair. NAVAIR 01-1A-505 Installation Practices, Aircraft Electric and Electronic Wiring. NAVAIR 01-1A-509 Aircraft Weapons Systems Cleaning and Corrosion Control. NAVAL SEA SYSTEMS COMMAND NAVSEA OD 30393 Design Principles and Practices for Controlling Hazards of Electro-Magnetic R

36、adiation to Ordnance (HERO Design Guide). NAVAL SUPPLY SYSTEMS COMMAND NAVICP P2300 Series Data Set. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-STD-3001-1(AS) 4 NAVSUP Pub. 700 CD-ROM containing the Navy MIL-STD-2073 Packaging Program. (Copi

37、es of Cataloging Handbooks H-4, H-6, and H-8 are available from the Commander, Defense Logistic Service Center, Battle Creek, MI 49017-3084. Application for copies of CFRs should be addressed to the Superintendent of Documents, Attn: New Orders, P.O. Box 371954, Pittsburgh, PA 15250-7954. Copies of

38、MCO P1200.7 are available from Commandant of Marine Corps, Code ARDC, Headquarter, U.S. Marine Corps, Washington, DC 20830-1775. Copies of NAVAIR and NAVSEA manuals are available by request to Commanding Officer, Naval Air Technical Services Facility (NATSF), 700 Robbins Avenue, Philadelphia, PA 191

39、11-5097. The P2300 series is part of NAVSUP Publication 600. Copies of NAVSUP 600D (for Government personnel) and NAVSUP 600F (for contractors) are available from the Naval Inventory Control Point Philadelphia, Publications/Forms Branch, 700 Robbins Avenue, Philadelphia, PA 19111-5098. Copies of NAV

40、SUP 700 are available by request to Commander, Naval Inventory Control Point, Code 05411, 5450 Carlisle Pike, P.O. Box 2020, Mechanicsburg, PA 17055-0788.). 2.3 Non-Government publications. The following documents form a part of this document to the extent specified therein. Unless otherwise specifi

41、ed, the issues of the documents that are DoD adopted are those listed in the latest issue of the DoDISS, cited in the solicitation. Unless otherwise specified, the issues of the documents not listed in the DoDISS are the issues of documents cited in the solicitation (see 6.2). AMERICAN NATIONAL STAN

42、DARDS INSTITUTE (ANSI) ANSI C95.1 Standard for Safety Levels with Respect to Human Exposure to Radio Frequency Electromagnetic Fields, 3 KHZ to 300 GHZ. ANSI C95.3 Radiation, Electromagnetic, Potentially Hazardous, at Microwave Frequencies, Techniques and Instrumentation for the Measurement of. ANSI

43、 Y10.5 Letter Symbols for Quantities Used in Electrical Science Electrical Engineering. ANSI Y14.5 Dimensioning and Tolerancing. ANSI Y14.15 Electrical and Electronics Diagrams. ANSI Y32.10 Diagrams, Fluid Power, Graphic Symbols for. ISO 8879 Information Processing - Text and Office Systems - Standa

44、rd Generalized Markup Language (SGML). (Copies of the documents listed above are available from the American National Standards Institute Inc., 11 West 42nd Street, New York, NY 10036.) AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME) ASME-Y14.5M Dimensioning and Tolerancing. Provided by IHSNot for R

45、esaleNo reproduction or networking permitted without license from IHS-,-,-MIL-STD-3001-1(AS) 5 (Copies of the documents listed above are available from the American Society of Mechanical Engineers, 345 East 47th Street, New York, NY 10017-2392.) INSTITUTE OF ELECTRICAL AND ELECTRONICS ENGINEERS (IEE

46、E) IEEE STD 91-84 Graphic Symbols for Logic Functions. IEEE STD 200 Reference Designations for Electrical and Electronics Parts and (ANSI Y32.16) Equipments. IEEE STD 260 Letter Symbols for Units of Measurement. IEEE 280-85 Letter Symbols for Quantities Used in Electrical Science and (ANSI Y10.5) El

47、ectrical Engineering. IEEE STD 315 Graphic Symbols for Electrical and Electronic Diagrams. (ANSI Y32.2) ANSI/IEEE STD 315A Graphic Symbols Supplement. (Copies of the documents listed above are available from the IEEE Service Center, 445 Hoes Lane, P.O. Box 1331, Piscataway, NJ 08855-1331). 2.4 Order

48、 of precedence. In the event of a conflict between the text of this document and the references cited herein, the text of this document takes precedence. Nothing in this document, however, supersedes applicable laws and regulations unless a specific exemption has been obtained. 3. DEFINITIONS. 3.1 A

49、cronyms used in this standard. The acronyms used in this standard are defined as follows: ANSI American National Standards Institute. ASCII American Standard Code for Information Interchange. ASME American Society of Mechanical Engineers. ATE Automatic Test Equipment. BIT Built-in Test. BITE Built-in Test Equipment. CAC Critical Alloy Code