NAVY MIL-STD-1320-155-1974 TRUCKLOADING OF HAZARDOUS MATERIALS GUIDED MISSILE AIM-7E OR 7F (SPARROW) (LESS WINGS AND FINS) IN CONTAINER CNU-166 E FLEET ISSUE UNIT LOAD《制导导弹危险原料 AIM.pdf

《NAVY MIL-STD-1320-155-1974 TRUCKLOADING OF HAZARDOUS MATERIALS GUIDED MISSILE AIM-7E OR 7F (SPARROW) (LESS WINGS AND FINS) IN CONTAINER CNU-166 E FLEET ISSUE UNIT LOAD《制导导弹危险原料 AIM.pdf》由会员分享，可在线阅读，更多相关《NAVY MIL-STD-1320-155-1974 TRUCKLOADING OF HAZARDOUS MATERIALS GUIDED MISSILE AIM-7E OR 7F (SPARROW) (LESS WINGS AND FINS) IN CONTAINER CNU-166 E FLEET ISSUE UNIT LOAD《制导导弹危险原料 AIM.pdf（7页珍藏版）》请在麦多课文档分享上搜索。

1、- MIL-STD-1320 -155 81 m 7777711 0070Y29 T = MIL-STD-1320-155 MILITARY STANDARD TRUCKLOADING OF HAZARDOUS MATERIALS (NAVY) lOED MISSILE, AIM-7E OR 7f (SPARROW) (LESS WINOS AND FINS) FLEET ISSUE UNIT LOAD IN CONTAINER CNU-16/E UNIT LOAD DATA AIM-7t xlM-/F UNIT LOAD DRAWING . WR-54/2% . WR-s1/156 NO.

2、OF MISSILES PER CONTAINER 3 3 NO. OF CONTAINERS PER UNIT LOAD. . 2 2 GROSS WEIGHT OF ONE CONTAINER (APPROX). . GROSS WEIGHT OF UNIT LOAD (APFROX) CUBE 162.3 CU FT 1833 LBS 3671 LBS 1972 LBS 3949 LBS DIMENSIONS L 159 x W 36 Y H (OVERALL) 26 INCHES (STACKING) 23 INCHES DOT HAZARD CLASSIFI Fn 40 FT TRA

3、ILER (FLATBED) 3 NOTES: i. UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHS. 2. FOR CROSS REFERENCE TO ASSCIAlED PALLETIZING, CONTAINERLOADING AND CARLOADING MILITARY STANDARDS REFER TO INDEX TO STANDARDS, MIL-HDBK-236 (NAVY). LTL 40 FT TRAILER (FLATBED) 4. 5, 6 STACKING AND STRAPPING 7 17SEPlEMBE

4、 1974 A AUTHORIZED AND RELEASED FOR HIGHWAY SHIPMENTS ONLY NAVAL WEAPONS HANDLING LABORATORY N A D EARLE, NEW JERSEY - . - -9 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-STD-1320 -155 81 77777LL 0070Li30 b MIL-STD-1320-155 (NAVY) GENERAL NOTE

5、S I. THIS DOCUMENT GIVES DETAILED INSTRUCTIONS FOR TRUCKLOADING THE GUIDED MISSILES AIM-7E OR AIMJF, (SPARROW) IN THE CNU- I NAILS, FF-N-105, TYPE Il, STYLE IO, COMMON BRIGHT. FOR GENERAL TRUCKLOADING PROCEDURES REFER TO THE GENERAL TRUCKLOADING DOCUMENT, MIL-STD-1320. B. 9, IO. 11. FTL 40 FT TRAILE

6、R (FLATBED) I. A FULL TRAILER LOAD CONSISTS OF I8 CNU-166h CONTAINERS OF AIM-7E OR AIM-7F GUIDED MISSILES. +=-i RETAIL (B LOCATION OF AFT PIIEPOSITIONED BLOCKING . . . , . . PAGE 1 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-STD-1320-155 (NAV

7、Y) UNIT LOAD STRAPS OMITTED FOR CLARITY I US1 Cf MATERIALS AND NAILING DATA FTL 40 FT TRAILER (FLATBED) PAGE 3 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-STD-1320 -155 L 77777LL 0070LI32 T m MIL-STD-1320-155 (NAVY) LTL 40 FT TRAILER (FLATBED

8、) I. WHEN REQUIRED TO SHIP LESS-THAN-TRUCKLOAD, SELECT THE CORRECT LOAD PATTERN FMI THE NUMBER OF UNIT LOADS TO BE SHIPPED FROM TABLE I AND POSITION THE UN17 LOADS ON THE TRAILER ACCORDINGLY. WHEN BLOCKING THE FRONT AND REAR OF 5 UNIT LOAM OR LESS USE 2 x 6 x 30 INCH BACK UP CLEATS. WHEN THE LOAD PL

9、AN REQUIRES THE STACK TO BE 1.5 UNIT LOADS HIGH (THREE CONTAINERS HIGH). THEY SHALL BE STRAPPED TOGETHER AS SHOWN ON PAGE 7. THE LTL SHOWN ON PAGE 5 IS FOR 5 UNIT LOADS AND THE LTL LOAD SHOWN ON PAGE 6 IS FOR 3 UNIT LOADS. THIS DOES NOT LIMIT LTL SHIPMENTS TO THIS QUANTITY. SHIPMENTS MY CONSIST OF A

10、 GREATER OR LESSER NUMBER OF UNIT LOADS. ACTUAL SHIPPING REQUIREMENTS WILL DETERMINE THE NUMBER OF UNIT LOADS TO BE SHIPPED. THE LOAD PATTERN, BLOCKING, BRACING AND TIE DOWNS SHALL BE IN ACCORDANCE WITH THE APPROPRIATE PARTS OF THIS MILITARY STANDAUD AND TW GENERAL RUCKLOADING DOCUMENT, MIL-STD-1320

11、 (NAVY). 2. 3. - 4. 5. I TABLE I LOAD PATTERNS * NO. OF NO. OF UNIT LOADS UNIT LOADS BULS pr 7ULS -1 6 ULS 1 il I Il 1 I I 1 SULS -1 I I *LOAD PATTERN IS THE FLOOR PLAN FOR THE LOAD. THE NUMBER IN TE BLOCKS IS THE NUMBER OF LAYERS OF UNIT LOADS IN TIIE STACK. THE NUMBER 1.5 INDICATES THAT THE STACK

12、IS 1.5 UNIT LOADS HIGH (OR THEE CONTAINERS HIGH. SEE GENERAL NOTE 4, AND m, PAGE 2). Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-STD-1320-155 (NAVY) . I 7 I CHAIN a LOAD BINDER UNIT LOAD STRAPS OMITTED FOR CLARITY UNITIZING SEAL UNITIZING STR

13、APPING CLEAT NUMBER OF UNIT LOADS 5 NUMBER OF CONTAINERS IO WEIGHT (AIM-E):. .18,355 LBS WEIGHT (AIMJF). . .19,745 LBS 3/8 INCH 4 I - I- 2x418 16 2x630 16 SEE FIELD NOTE SEE FIELD NOTE I CROSSMEMBER 1x680 I 2 NO.KS NAIL . I REQD NAILS DESCRIPTION SIZE TO I UST OF MATERIALS AND NAIUNG DATA LTL 40 FT

14、TRAILER (FLATBED) ?Am 5 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-STD-1320 -155 AL = 77777LL 0070434 3 m 1 CROSSMEMBER 1x680 l 2 3 (lodl NO.PCS NAIL I IzE :;E DESCRIPTION SIZE REQD TO NAILS MIL-STD-1320-155 (NAVY) 5 CHAIN 8 LOAD BINDER 3/8

15、INCH 4 4 BACK UP CLEATS 2x630 16 3 SLEEPER 2x418 16 2 CLEAT 2X4X51/2 2 F I - I- SEE FIELD NOTE SEE FIELD NOTE ! - I- 2 x 6 DOUBLED. NAIL IST PIECE TO TRAILER FLOOR W/I-IM NAIL EVERY 8 INCHES. NAIL ZND PIECE TO IST IN LIKE MANNER. SEPARATOR ASSEMBI 1 REQUIRED LTL DATA NUMBER OF UNIT LOADS 3 NUMBER OF

16、 CONTAINERS 6 WEIGHT (AIM-70 11,013 LBS WEIGHT (AIM-7F) 11,847 LBS LIST OF MATERIALS AND NAILING DATA FAGf 6 LTL 40 FT TRAILER (FLATBED) Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-STD-1320-155 (NAVY) STACKING AND STRAPPING PROCEDURE I. POSIT

17、ION A THIRD CONTAINER ON TOP OF THE UNIT LOAD AS SHOWN IN DETAIL F. WKE CERTAIN THE SUPPORT POSTS ARE PROPERLY ENGAGED. POSITION STRAPPING THROUGH THE FORK POCKETS OF THE TOP CONTAINER OF THE UNIT LOAD AND THROUGH THE FORK POCKETS OF THE MIDDLE CONTAINER. TENSION STRAPPING AND DOUBLE NOTCH SEALS. 2.

18、 3. UNIT LOAD STRAPS OMITTED FOR CIARITY THIRD CONTAINER DETAIL REVIEW ACTIVITIES: PREPARING ACTIVITY: NAVY - OS, AS NAVY - OS (PROJECT NO. 814-N248) GE7 * U. S. GOVERNMENT PRINTING OFFICE 1974 -603- 11 1 2367 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-