NAVY MIL-I-50360 (1)-1986 INITIATOR CARTRIDGE ACTUATED DELAY M51 AND M88 METAL PARTS ASSEMBLY《M51 及 M88火药驱动起始延迟装置金属零件》.pdf

《NAVY MIL-I-50360 (1)-1986 INITIATOR CARTRIDGE ACTUATED DELAY M51 AND M88 METAL PARTS ASSEMBLY《M51 及 M88火药驱动起始延迟装置金属零件》.pdf》由会员分享，可在线阅读，更多相关《NAVY MIL-I-50360 (1)-1986 INITIATOR CARTRIDGE ACTUATED DELAY M51 AND M88 METAL PARTS ASSEMBLY《M51 及 M88火药驱动起始延迟装置金属零件》.pdf（2页珍藏版）》请在麦多课文档分享上搜索。

1、,- . MIL-1-50360 (1) 13 7777706 032bbh7 - 7 W Beneficial comnents (recommendations, additions, deletions) and any pertinent data which may be of use in improving this document should be addressed to: Commanding Officer, Naval Ordnance Station, Standardization Branch (5241), Indian Head, MD 20640-500

2、0, by using the self-addressed Standardization Document Improvement Proposal (DD Form 1426) appearing at the end of the specification or by letter. *O S-37-Ici) MIL- 1-50360 (OS) AMENDMENT 1 15 JULY 1986 MI LITARY SPEC I FICAT SON INITIATORS, CARTRIDGE ACTUATED DELAY, M51 AND M88 METAL PARTS ASSEMBL

3、Y -* I This amendment forms a dated 15 Januar-v 1971, and is part of Military Specification MIL-I-50360(MU), approved for use within the Naval Sea Systems Command, Departhent of the Navy, and is available for use by all Departments and Agencies of the Department of Defense. PAGE 1 2.1 Delete “MIL-ST

4、D-413 Visual Inspection Guide for Rubber O-Rings“ PAGE 2 2.2 Delete in its entirety and substitute: “2.2 Other publications. The following document forms a part of this specification to the extent specified herein. Unless otherwise SDeCifhd, the issues of the document which are DOD adopted shall be

5、those listed in the- issue of the DODISS specified in the solicitation. Unless otherwise specified, the issues of documents not listed in the DODISS shall be the issue of the nongovernment documents which is current on the date of the sol ici tation. AMSC NIA FSC 1377 DISTRIBUTION STATEMENT A: Appro

6、ved for public release; distribution is unlimited, F 1 THIS DOCUMENT CONTAINS & PAGES. - - - , ? Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-I-503b0 (LI 13 7799706 032bb70 3 MIL- 1-50360(0S) AMENDMENT 1 15 JULY 1986 1 ANSI B46.1-78 Applicatio

7、n for copies should be addressed to the American National (Nongovernment standards and other publications are normally available Surface Texture (Surface Roughness, Waviness and Lay) Standards Insti tute (ANSI), 1430 Broadway, NY 10018. ) from the organization which prepares or which distributes the

8、 documents. These documents also may be available in or through libraries or other informa ti onal servi ces. ) I PAGE 4 4.3.2, line 8, change “ASA B46.1“ to “ANSI B46.1-78“. Preparing Activity: Navy - OS Project No. 1377-N803 2 I Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-