NAVY MIL-A-60658-1967 ACTUATOR ROTARY 1000-39 REMANUFACTURED METAL PARTS ASSEMBLY《1000-39 改制金属零件装置的旋转致动装置》.pdf

《NAVY MIL-A-60658-1967 ACTUATOR ROTARY 1000-39 REMANUFACTURED METAL PARTS ASSEMBLY《1000-39 改制金属零件装置的旋转致动装置》.pdf》由会员分享，可在线阅读，更多相关《NAVY MIL-A-60658-1967 ACTUATOR ROTARY 1000-39 REMANUFACTURED METAL PARTS ASSEMBLY《1000-39 改制金属零件装置的旋转致动装置》.pdf（15页珍藏版）》请在麦多课文档分享上搜索。

1、MIL-A -60658 (MU) 29 March 1967 MILITARY SPECIFICATION REMANUFACTtJRED METAL PARTS ASSEMBLY ACTUATOR, ROTARY 1000-39 1. SCOPE 1.1 This specification covers Actuator, Rotary 1000-39, Remanufactured Metal Parts Assembly. junction with other propellant actuated devices in aircrew emergency escape The a

2、ssembly will ultimately be loaded and used in con- systems, 2, APPLICABLE DOCUMENTS 2.1 The following documents of the issue in effect on date of invitation for bids or request for proposal form a part of this specification to the ex- tent specified herein. SP%CIFICATIONS Military MIL-A-2550 - Ammun

3、ition and Special Weapons, General Specification for STANDAHIS Military MIL-STD-105 MIL-STD-109 MIL-STD-639 MIL-STD-il67 - Ammunition Data Card - Sampling Procedures and Tables for Inspection - Quality Assurance Terms and Definitions - Surface Roughness Values Preferred for Arq by Aktributes Ordnanc

4、e Materiel DRIIWINGS Munitions Command Cg218443 Cg218444 - Carton, Packing Ammunition, for Rotary Actuator, 1000 or 1925 series - Box, Packing Ammunition, for Rotary Actuator, 1000 or 1925 series - MIL-A-bOb58 33 H 7779706 0340635 T I z A Provided by IHSNot for ResaleNo reproduction or networking pe

5、rmitted without license from IHS-,-,-joints shall be assembled hand-tight. 3.3.1 The remanufactured Actuator metal parts assembly shall contain new parts in accordance with Table I. TABLE I Name of Part Part Number End Closure Assembly lOOO-l32 (Talley) Pin, Shear Packing, O-Rings Packing, O-Rings P

6、acking, O-Rings Packing, O-Rings Packing, O-Rings Packing, o -Rings Stud, Shear Strap, Assembiy Pellet 2 /- .y- loi9 (Talley) MSgo21-o12 MS 9021 -018 Ms 9021-020 MS 9021-03 2 MSgO21-009 MS 9021 - 014 1003 ( Talley) 1000-100 (Talley i006 ( Talley) Provided by IHSNot for ResaleNo reproduction or netwo

7、rking permitted without license from IHS-,-,-Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-Gage Gage &ge Visual Visual Visual Visual Visual 5 Provided

8、 by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-NIL-A-bob58 13 7779706 0340620 3 MIL-A-o (MU) 4.2.2.4 (Contd) Defect Method of Inspection 101. Any part missing 102, Improper assembly 103. “0“ ring not lubricated 104. Threads damaged 201. Pellet missing, loos

9、e or improperly inserted Visual & Manual 4.2.2.5 Ring, Firing Port, Drawing 1002, covering a detail of Drawing None defined 101. 102. 103. Metal defective 104. Pftch diameter of thread, max. Major diameter of thread, Mn. Protective finish, inadequate or defective 107. Foreign matter None defined Non

10、e defined- 6 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-A-60658 (MU) Gage age Gage Gage Gage Gage Visual Vi sua1 Visual Visual Visual Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-A-bOb

11、5 13 7777906 03L10b22 7 W m-60658 (MU) 4 . 2 . 2.8 ( Cont d) Defect Method of Inspection MAJOR 101. Mebal d fective 102. Protective finish inadequate 103. Burr 104. Foreign matter Visual Visual Visual Visual MLNOR None defined 4.2.2.9 Plug, Blowout Drawing lOl5 covering a detail ox Drawing 1000-39.

12、CRITI CAL None defined MAJOR 101. Metal defective 102. 103. Burr 104. Foreign matter Protective finish inadequate or defective Visual Visual Visual Visual MNOR None defined 4.2.2.10 Washer, Drawing 1017 covering a detail of Drawing 1000-39, CITICAL None defined MAJOR 101. Material defective 102. 103

13、. Burr 104. Foreign matter Protective finish inadequate or defective a Visual Visual Visual Vi sua1 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MINOR None defined 4,2,2.11 Retainer, Cartridge Drawing 1018 covering a detail of Drawing 1000- 39 e C

14、RITICAL None defined Defect Method of Inspection 101. Metal. 102. lO3* Surface finish improper 104. Burr 105. Foreign mtter Protective finish inadequate or defective Visual Visual Visual Visual Visual MINOR None defined 4.2.2.12 Head, Pis%bOn, Drawing 1021 covering a detail of drawing 1000-39, CRITI

15、 CAL None defined VisuaL Visual Visual Visual Visual 9 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,- MIL-A-bob58 13 I 777770b 0390629 O I, MIL-A-o (MU) 4.2 . 2 a 13 Ball, Screw and Piston Assembly Drawing 1024 covering a detail of Drawing 1000-39.

16、 Defect CRITICAL None defined Method of Inspection MAJOR 101 a 102. 104. 105 . i03 . i06 . 107 . 108 . 109 a 110 a Metal defective Any part missing Improper assembly Mounting hole threads damaged Strap clamp screw threads damaged Lock pin loose, missing tto“ ring not lubricated Head piston loose Bur

17、r Foreign matter Visual Visual Visual Vi sual Visual Manual & Visual Vi sual Manual & Visual Visual Visual MNOR None defined 4.2.2.14 Clamp, Strap Drawing 1032 covering a detail of Drawing 1000-39. None defined MAJOR 101. Metal defective 102. 104. Foreign matter Protective finish inadequate or defec

18、tive 103. BUW Visual Vi sual Visual Visual MINOR None defined -7 ,- lo Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-Method of Inspection Visual Gage Gage Visual Visual Vi sua1 Visual Visual Visual Vi sual Visual Vi sual Visual Visual Visual Visual

19、 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-A-o (MU) 4.2.2.17 (Cont MAJOR None define mNOR Defect 201. Sealing strips missing, loose or improperly 202. Contents loose . 203. Flaps loose or distorted 204. 205, 4.2.2.18 Packing in wooden box,

20、Drawing, CgZlU444 applied Cut or .damaged through al1 impregnated layers Marking missing, incorrect or illegible CRITICAL None defined MAJOR None defined Method of Insneckion 1 MINOR 201. Contents loose 202. Hardware missing, loose, broken or improperly engaged 204. Contents of box eqosed 205. Marki

21、ng missing, incorrect or unidentifiable 206. Number of units, incorrect Vi sual Mmal Visual Vi sual Visual Visual Vi sual Visual 4.2.3 Inspection testing.- The following tests shall be performed in accordance with the provisions of 4.3. 4.2.3 1 Hydrostatic pressure. - Each actuator body assembly sha

22、ll be sub- jected to the hydrostatic pressure test. the requirements of 3.2 shall be cause for rejection of the subassembiy. Failure of any item to comply with 12 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-Provided by IHSNot for ResaleNo reprodu

23、ction or networking permitted without license from IHS-,-,- MIL-A-bOb5 13 U 7999906 03LI0628 m-60658 (MU) 6.2 Remanufactured exberior components are listed in Table IV. TABLF: IV Name of Part Part Number (Talley) Bracket, Mounting Breech Assembly Ring, Firing Port Support, Bearing Body 1082 or 1000-

24、116 1022 1002 i004 1072 or lOOO-ll7 6.3 Nylon pellets.- Components which contain nylon pellets and are to be replated shall have the pellets removed and new pellets installed, after plating, in accordance with the applicable drawing. 6.4 When remanuacturing and loading of assembly is performed in an

25、 integrated plant, the metal parts assembly requirement may be waived and the residual magnetism requirement performed on the loaded assembly only. &ist _- o dian : Preparing activity: Army - MU Aw - Mu Project No. 1377-Ai66 14 - -u ,- Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-A-60658 (MU) E H 3 m li E Cn M I O O a n h o Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-