ITU-T L 1000-2011 Universal power adapter and charger solution for mobile terminals and other hand-held ICT devices (Study Group 5)《(预发布)移动终端和其它便携式信息通讯技术(ICT)设备的万用电源变压器和充电器方案》.pdf

《ITU-T L 1000-2011 Universal power adapter and charger solution for mobile terminals and other hand-held ICT devices (Study Group 5)《(预发布)移动终端和其它便携式信息通讯技术(ICT)设备的万用电源变压器和充电器方案》.pdf》由会员分享，可在线阅读，更多相关《ITU-T L 1000-2011 Universal power adapter and charger solution for mobile terminals and other hand-held ICT devices (Study Group 5)《(预发布)移动终端和其它便携式信息通讯技术(ICT)设备的万用电源变压器和充电器方案》.pdf（36页珍藏版）》请在麦多课文档分享上搜索。

1、 International Telecommunication Union ITU-T L.1000TELECOMMUNICATION STANDARDIZATION SECTOR OF ITU (06/2011) SERIES L: CONSTRUCTION, INSTALLATION AND PROTECTION OF CABLES AND OTHER ELEMENTS OF OUTSIDE PLANT Universal power adapter and charger solution for mobile terminals and other hand-held ICT dev

2、ices Recommendation ITU-T L.1000 Rec. ITU-T L.1000 (06/2011) i Recommendation ITU-T L.1000 Universal power adapter and charger solution for mobile terminals and other hand-held ICT devices Summary Recommendation ITU-T L.1000 provides high level requirements for a universal power adapter and charger

3、solution that will reduce the number of power adapters and chargers produced and recycled by widening their application to more devices and increasing their lifetime. The solution also aims to reduce energy consumption. The longer life cycle and possibility of avoiding device duplication reduces the

4、 demand on raw materials and waste. The universal power adapter and charger solution is designed to serve the vast majority of mobile terminals and other hand-held ICT devices. History Edition Recommendation Approval Study Group 1.0 ITU-T L.1000 2010-03-09 5 2.0 ITU-T L.1000 2011-06-13 5 Keywords Ch

5、arger, ecodesign, energy-efficiency, power adapter, universal charger solution. ii Rec. ITU-T L.1000 (06/2011) FOREWORD The International Telecommunication Union (ITU) is the United Nations specialized agency in the field of telecommunications, information and communication technologies (ICTs). The

6、ITU Telecommunication Standardization Sector (ITU-T) is a permanent organ of ITU. ITU-T is responsible for studying technical, operating and tariff questions and issuing Recommendations on them with a view to standardizing telecommunications on a worldwide basis. The World Telecommunication Standard

7、ization Assembly (WTSA), which meets every four years, establishes the topics for study by the ITU-T study groups which, in turn, produce Recommendations on these topics. The approval of ITU-T Recommendations is covered by the procedure laid down in WTSA Resolution 1. In some areas of information te

8、chnology which fall within ITU-Ts purview, the necessary standards are prepared on a collaborative basis with ISO and IEC. NOTE In this Recommendation, the expression “Administration“ is used for conciseness to indicate both a telecommunication administration and a recognized operating agency. Compl

9、iance with this Recommendation is voluntary. However, the Recommendation may contain certain mandatory provisions (to ensure, e.g., interoperability or applicability) and compliance with the Recommendation is achieved when all of these mandatory provisions are met. The words “shall“ or some other ob

10、ligatory language such as “must“ and the negative equivalents are used to express requirements. The use of such words does not suggest that compliance with the Recommendation is required of any party. INTELLECTUAL PROPERTY RIGHTS ITU draws attention to the possibility that the practice or implementa

11、tion of this Recommendation may involve the use of a claimed Intellectual Property Right. ITU takes no position concerning the evidence, validity or applicability of claimed Intellectual Property Rights, whether asserted by ITU members or others outside of the Recommendation development process. As

12、of the date of approval of this Recommendation, ITU had not received notice of intellectual property, protected by patents, which may be required to implement this Recommendation. However, implementers are cautioned that this may not represent the latest information and are therefore strongly urged

13、to consult the TSB patent database at http:/www.itu.int/ITU-T/ipr/. ITU 2012 All rights reserved. No part of this publication may be reproduced, by any means whatsoever, without the prior written permission of ITU. Rec. ITU-T L.1000 (06/2011) iii Table of Contents Page 1 Scope 1 2 References. 1 3 De

14、finitions 2 3.1 Terms defined in this Recommendation . 2 4 Abbreviations and acronyms 2 5 Basic configuration of universal power adapter and charger solution . 2 6 General requirements 3 6.1 Power adapter interface 3 6.2 Energy efficiency requirements 3 6.3 Safety requirements 3 6.4 EMC requirements

15、 4 6.5 Resistibility requirements . 4 6.6 Eco-environmental specification 4 Annex A Extending the universal power adapter and charger solution to more ICT devices than mobile terminals and other hand-held ICT devices . 6 Annex B Universal charger solution for mobile terminals . 7 B.1 Target basic co

16、nfiguration 7 B.2 Universal charger solution and cable . 8 B.3 Compatibility aspects . 9 B.4 Charger solution safety . 10 B.5 Additional EMC DC output characteristics 10 Appendix I Use cases 11 I.1 OMTP use cases . 11 I.2 Additional ITU-T use cases 12 Appendix II Common charging and local data conne

17、ctivity (OMTP) 13 Appendix III Technical requirements and test method for the power adapter and the charging/data port of mobile telecommunication terminal equipment (YD/T 1591) . 14 III.1 Basic connectivity architecture . 14 III.2 Power adapter DC output port . 14 III.3 Electrical characteristics .

18、 15 III.4 Identification mark proposal . 17 Appendix IV Integrated I/O connection for universal power adapter/charging solution for mobile terminals (TTAS.KO-06.0028/R4) . 18 Appendix V 30-pin connection for integrated universal power adapter/charging and data transfer solution for mobile terminals

19、. 21 Appendix VI Reliability and safety issue of high current charge . 22 Appendix VII Ecodesign criteria for electronics 24 iv Rec. ITU-T L.1000 (06/2011) Page Appendix VIII GSMA universal charging solution 25 Bibliography. 26 Rec. ITU-T L.1000 (06/2011) v Introduction This Recommendation defines t

20、he requirements of a universal charger solution for mobile terminals and other hand-held ICT devices. Further study is required to extend the solution to other ICT devices. This Recommendation also takes into consideration energy efficiency, emissions reduction and the use of scarce and raw material

21、s. It has been estimated (see Appendix VIII) that the widespread adoption of a universal charger solution for mobile phones will result in a 50 per cent reduction in standby energy consumption and approximately 14 million tons of greenhouse gas emissions each year. The universal power adapter and ch

22、arger solution will be more convenient and simpler to use for consumers who will be able to charge their mobile phones from any available universal mobile charger and use the same power adapter for many future handsets, thus eliminating up to 50000 tons of duplicate power adapters and chargers. It i

23、s noted that the environmental impact of any universal charger solution should be considered over the entire life cycle and that the transition towards a universal charger solution does not aim to replace existing chargers immediately; this is because there is an estimated 2 billion of them currentl

24、y in use. This Recommendation was drafted with support from and in consideration of activity in other SDOs and other types of organizations. This Recommendation is designed to ensure the universal charger solution operates within recognized current and voltage safety parameters by adopting existing

25、mobile terminal technologies such as computer USB output or recharging solutions in cars. Battery safety and lifetime issues have been considered in the drafting of this Recommendation. Rec. ITU-T L.1000 (06/2011) 1 Recommendation ITU-T L.1000 Universal power adapter and charger solution for mobile

26、terminals and other hand-held ICT devices 1 Scope This Recommendation describes the general requirements for a universal power adapter and charger solution for mobile terminals (any terminal able to connect to a mobile network) and other hand-held ICT devices (e.g., MP3/MP4, PDA, camera, wireless ea

27、rphone) compliant with the electrical current limits set out in Annex B. This Recommendation includes basic configurations and general requirements for the power adapter and charger interface, energy efficiency, safety, electromagnetic compatibility, resistibility, and eco-environmental specificatio

28、ns. 2 References The following ITU-T Recommendations and other references contain provisions which, through reference in this text, constitute provisions of this Recommendation. At the time of publication, the editions indicated were valid. All Recommendations and other references are subject to rev

29、ision; users of this Recommendation are therefore encouraged to investigate the possibility of applying the most recent edition of the Recommendations and other references listed below. A list of the currently valid ITU-T Recommendations is regularly published. The reference to a document within thi

30、s Recommendation does not give it, as a stand-alone document, the status of a Recommendation. ITU-T K.21 Recommendation ITU-T K.21 (2008), Resistibility of telecommunication equipment installed in customer premises to overvoltages and overcurrents. ITU-T K.66 Recommendation ITU-T K.66 (2004), Protec

31、tion of customer premises from overvoltages. ITU-T K.74 Recommendation ITU-T K.74 (2008), EMC, resistibility and safety requirements for home network devices. CISPR 22 IEC, CISPR Publication 22 (2008), Information technology equipment Radio disturbance characteristics Limits and methods of measureme

32、nt. CISPR 24 IEC, CISPR Publication 24 (1997), Information technology equipment Immunity characteristics Limits and methods of measurement. ETSI EN 301 489-34 ETSI EN 301 489-34 (2010), Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for r

33、adio equipment and services; Part 34: Specific conditions for External Power Supply (EPS) for mobile phones. IEC 60950-1 IEC 60950-1 (2005), Information technology equipment Safety Part 1: General requirements. IEC 62430 IEC 62430 (2009), Environmentally conscious design for electrical and electroni

34、c products. IEC 62684 IEC 62684 (2011), Interoperability specifications of common external power supply (EPS) for use with data-enabled mobile telephones. 2 Rec. ITU-T L.1000 (06/2011) ISO 14040 ISO 14040 (2006), Environmental management Life cycle assessment Principles and framework. ISO 14044 ISO

35、14044 (2006), Environmental management Life cycle assessment Requirements and guidelines. IEEE 1680 IEEE 1680 (2009), IEEE Standard for Environmental Assessment of Electronic Products. IEEE 1725 IEEE 1725 (2006), Standard for Rechargeable Batteries for Cellular Telephones. 3 Definitions 3.1 Terms de

36、fined in this Recommendation This Recommendation defines the following terms: 3.1.1 charger: A common term used to describe the power adapter for the mobile terminal or other hand-held ICT devices used to apply power to the battery. 3.1.2 detachable cable: A detachable cable connects the power adapt

37、er to the mobile terminal or other hand-held ICT device for powering through two connectors, one on the charger side and one on the side of the mobile terminal or other hand-held ICT device. 3.1.3 power adapter: The equipment that converts mains AC power voltage at the input to low DC power voltage

38、at the output, or the equipment which transfers DC power supply, e.g., car voltage to another low voltage of DC power output. 3.1.4 universal charger solution: Overall initiative that defines the charger solution for different mobile terminals and other hand-held ICT devices. 4 Abbreviations and acr

39、onyms This Recommendation uses the following abbreviations and acronyms: DC Direct Current GHG Green House Gas emission ICT Information and Communication Technology LVDC Low Voltage Direct Current OMTP Open Mobile Terminal Platform PDA Personal Digital Assistant SCCP Short Chain Chlorinated Paraffin

40、s USB Universal Serial Bus 5 Basic configuration of universal power adapter and charger solution The target basic configuration of a universal charger solution consists of: 1) a power adapter (charger of the mobile terminal), other ICT device for charging (which can also be used for data transfer),

41、or a renewable energy power supply (e.g., solar, wind); 2) a detachable cable (used for charging or data transfer) or optionally a captive cable (used for charging only), depending on market demand; 3) a mobile terminal or other hand-held ICT device. NOTE Further study is needed to specify more deta

42、ils (e.g., logical, functional or physical). Rec. ITU-T L.1000 (06/2011) 3 6 General requirements 6.1 Power adapter interface The power adapter is required to provide an output DC voltage and DC current. NOTE A dedicated specification for mobile terminals is shown in Annex B. 6.2 Energy efficiency r

43、equirements 6.2.1 No-load power consumption The no-load power consumption of the power adapter should be as low as practicable. It is expected that the industry will aim for a figure as close to zero as possible. If practicable, the power adapter should indicate to the customer its no load condition

44、. It is expected that industry will aim for power adapters and chargers to enter a shut-down mode to minimize power consumption either when the unit is removed from the supply or when the battery is fully charged, thereby ensuring significant energy savings. NOTE A dedicated specification for mobile

45、 terminals is shown in Annex B. 6.2.2 Power efficiency with load It is expected that industry will aim to minimize the power dissipated in the power adapter whilst powering the load device. An example of an evaluation of battery charging efficiency is given in Annex B. NOTE A dedicated specification

46、 for mobile terminals is shown in Annex B. 6.2.3 Solar power for chargers and mobile phones and related ICT devices Solar-powered mobile terminals could provide mobile connectivity to about two billion people across the globe that do not have access to electricity. Solar power has the advantage of b

47、eing more sustainable and better for the environment than the electricity grid which currently uses fossil fuel in its mix of energy sources. It is therefore recommended that power adapters and chargers, mobile terminals and other ICT devices be designed to make maximum use of available renewable en

48、ergy sources. NOTE 1 This can be of considerable interest for the requirements of some developing countries, e.g., solar, wind power. As an example, power adapter and charger interfaces would need to be designed so that they do not stress the batteries inside the mobile terminal or other ICT device

49、by providing too much current when solar input is also taking place. High temperature stresses on the ICT device caused by sun exposure should also be avoided. NOTE 2 In the future, this Recommendation may be updated to use additional renewable energy sources such as wind or other forms of energy harvesting as a source of power. 6.3 Safety requirements The power adapter must be a limited power source in accordance with clause 2.5 of IEC 60950-1, and comply with the safety requirements of IEC