ITU-R TF 486-2-1998 Use of UTYC Frequency as Reference in Standard Requency and Time Signals Emissions《标准统治和时间信号发射使用UTYC频率作为参考标准》.pdf

《ITU-R TF 486-2-1998 Use of UTYC Frequency as Reference in Standard Requency and Time Signals Emissions《标准统治和时间信号发射使用UTYC频率作为参考标准》.pdf》由会员分享，可在线阅读，更多相关《ITU-R TF 486-2-1998 Use of UTYC Frequency as Reference in Standard Requency and Time Signals Emissions《标准统治和时间信号发射使用UTYC频率作为参考标准》.pdf（1页珍藏版）》请在麦多课文档分享上搜索。

1、RECOMMENDATION ITU-R TF.486-2 USE OF UTC FREQUENCY AS REFERENCE IN STANDARD FREQUENCY AND TIME SIGNALS EMISSIONS (Question ITU-R 102- 1/7) (1 974- 1978- 1998) The ITU Radiocommunication Assembly, considering a) that, for a user, data concerning the departures of a standard-frequency and time-signal

2、emission are of great importance; b) that, in many cases, it is technically possible to adjust a radiated standard frequency so that the variations of phase with respect to Coordinated Universal Time (UTC) remain within a narrow tolerance which is small compared to the period of the carrier frequenc

3、y; 4 emissions, thereby providing alternative operation in case of transmitter interruption; d) accuracy for use in electronic systems and in digital transmissions; e space-based standard emissions) are now in use; 0 that equipment is available which is capable of receiving several nearly synchronou

4、s that there is a need for a universally accepted reference frequency of high stability and that many controlled electronic systems (e.g. oscillators disciplined by ground- or that such systems can be better coordinated if they use a common frequency reference, recommends 1 ultimate reference for st

5、andard-frequency emissions; 2 frequency, should be an average over an appropriate time of the relative frequency deviations; 3 UTC should be specified for each service and the values published by the administrations responsible for the standard time and frequency services; 4 systems. that the UTC fr

6、equency (see Recommendation ITU-R TF.460) should be used as the that data concerning the uncertainty of the standard frequency, with reference to the UTC that the range over which the phase of the standard fiequency can vary with reference to that the UTC frequency should also be used as the ultimate reference for other electronic