ITU-R SM 1048-1994 Design Guidelines for a Basic Automated Spectrum Management System (BASMS)《基本自动频谱管理系统的设计指南(BASMS)》.pdf

《ITU-R SM 1048-1994 Design Guidelines for a Basic Automated Spectrum Management System (BASMS)《基本自动频谱管理系统的设计指南(BASMS)》.pdf》由会员分享，可在线阅读，更多相关《ITU-R SM 1048-1994 Design Guidelines for a Basic Automated Spectrum Management System (BASMS)《基本自动频谱管理系统的设计指南(BASMS)》.pdf（5页珍藏版）》请在麦多课文档分享上搜索。

1、96 RECOMMENDATION ITU-R SM. 1048 DESIGN GUIDELINES FOR A BASIC AUTOMATED SPECTRUM MANAGEMENT SYSTEM (BASMS) (Question ITU-R 68/1) (1994) The ITLJ Radiocommunication Assembly, %. considering a) that the creation of a spectrum management system would support and facilitate national spectrum management

2、 and monitoring, coordination among administrations and notification to the Radiocommunication Bureau (BR); b) International Frequency List and Recommendation ITLJ-R SM.667; c) system; that basic data elements used in national spectrum management have been reflected in the Preface to the that admini

3、strations should maintain spectrum management data with an automated database management d) (DBMS) in the development and maintenance of their national spectrum management data; e) Software for Radio Spectrum Management; 0 that an automated spectrum management system for developing counuies also nee

4、ds to be developed to effectively manage the frequency assignment and other spectrum management data in these countries according to recommended standards, that many administrations have been successful in implementing automated database management system that computer programs which accomplish engi

5、neering analysis are described in the ITlJ Catalogue of recommends 1. and maintained; that computer software for a basic automated spectrum management system (BASMS) should be developed 2. using them or portions thereof to accelerate the development of a BASMS in the shortest possible time; 3. that

6、the user interface of the system will be in English with an option to convert to other languages; output documents intended for the general population (e.g. licences) should, to the extent practicable, be available in the national language; 4. that the BASMS be designed to support a single user (no

7、sharing of data, etc.), keeping in mind that, in the future, an advanced spectrum management system (ASMS), based on the BASMS functional requirements, should be developed to include increased flexibility and networking facilities in a multi-user environment; 5. 6. that existing automated spectrum m

8、anagement systems should be examined with the ultimate objective of that the introduction of the BASMS should include the necessary training; that the following software and hardware functional requirements should be used to develop a BASMS. 6. I Functional requirements This section describes the sp

9、ectrum management activities and procedures to be supported by the BASMS. The BASMS should have the following functional requirements. 6.1.1 Record keeping Support a database containing frequency assignment data and information for individual licence holders. Technical data specified in Recommendati

10、on ITU-R SM.667 for fixed, land mobile and broadcasting services should be included. Rec ITU-R SM.1048 97 6.1.2 Frequency assignment Automatically identify interference-free frequencies for an applicant if such a frequency is available; if not, identi the acceptable interference case. Such automatic

11、 techniques will be included where practicable. The process is to use appropriate calculations in conformity with commonly used interference assessment methods, frequency-distance functions or tables which allow for the user specification of minimum acceptable distance separations for co- and adjace

12、nt channels for each service in each band. It should also be possible to analyse a specific proposed frequency assignment using the same models to determine its interference potential. 6.1.3 Border coordination Identify licence applications requiring border coordination and automatically create a co

13、ordination document to be used for coordination with bordering countries. The ITU Digitized World Map (IDWM) could be used for this purpose. ., 6.1.4 Notification to the Radiocommunication Bureau Automatically identify applications requiring BR notification and create appropriate notification forms

14、suitable for submission to the BR. Create appropriate entries in the BASMS for tracking notification progress. 6.1.5 Licensing fees and fee collection Provide for recording fee payments and payment status associated with licensing functions. Only rudimentary facilities will be included for recording

15、 fees and identifying payment status since methods of calculating fees and requirements for billing vary from administration to administration. The programmes should be open for modification by the administration in this area so that they can be adapted to the particular local circumstances. 6.1.6 6

16、.1.7 6.1.8 6.1.8.1 Monitoring Provide spectrum management data to assist the monitoring stations. Equipment approval process (optional) Provide for authorization, certification, type acceptance, type approval. Reports generation Licence printing Print licences at the spectrum managers request. Licen

17、ce printing should follow a standard format. Fixed and variable text should be under the control of the user. A data item for “Remarks” should be included which will be printed on the licence. Other documents of this type such as import permits or construction certificates, should be provided in a s

18、imilar manner, if practicable. 6.1.8.2 Record summary Provide one-line summary data from each of the records selected by the user. 6.1.8.3 Record detail Provide a full listing of all data contained in selected records. 6.1.8.4 Transaction activity reports Provide periodic reports of transaction acti

19、vity at the specrum managers request; such reports to include, but not necessarily be limited to: - - total number of applications. number of applications in process (total, by service, by band), 6.1.8.5 Expiration and renewal notice Automatically create a list of applications due to expire at some

20、user-specified future date. Optionally generate hard-copy expiration notices. ITU-R RECMN*SM. LO48 94 .I 4855232 0523325 839 M . 98 Rec. ITU-R SM.1048 6.1.8.6 Summary status reports Provide summary statistics and specific record summaries for records in each processing status category. 6.1.8.7 Statu

21、s reports Provide a list of all records in any user-designated status category (such as pending, incomplete, etc.). 6.1.9 User interface User interfaces will be available in English with an option to convert to other languages. The user interface should be windows-like with extensive pse of help fea

22、tures, menus, etc. Such features will facilitate the evolution to an advanced system. 6.2 Radiocommunication service propagation and protection rad0 requirements The BASMS should support interference calculations above 30 MHz, based on the appropriate ITU - land mobile services, - - broadcasting ser

23、vices. Recommendations where practicable, for the following radiocommunication services: point-to-point radio-relay links of fixed service, 6.3 Software requirements The BASMS should be written using one of the popular database management languages, chosen for its suitability to the specific spectru

24、m management requirements. The BASMS program should be designed to support the following. 6.3.1 Standard data transacfions - record creation, - record editinglmodi fication, - record deletion. 6.3.2 Data entry Provisions should be made to make data entry as simple as possible, including the use of l

25、ogical full-screen editing and data entry validation and logical, user-changeable defaults. Data entry should be optimized for input data validation and, to the extent practicable, should be consistent with BR data forms. 6.3.3 Data modification Changes to records should be made using the same scree

26、n-editing specified for new data entry wherever possible. 6.3.4 Data back-up and archiving Standard features should be included that support routine back-up for data loss protection. Archiving should be provided for any deleted records identified by the spectrum manager for archive retention. Record

27、s should be identified singly and by class attributes (which should be specified in a user changeable data table). 6.3.5 Database inquiry Records of interest should be easily identified and extracted. Primary selection is to use a set of standard selection screens incorporating standard selection cr

28、iteria. The BASMS is also to support selection using Query by Example and Extended Query techniques. Inquiries will include, infer alia: - selection by frequency range, - selection by frequency range and bandwidth, ITU-R RECMN*SM- LO48 74 4855232 O523326 775 W Rec. ITU-R SM.1048 99 - - - selection b

29、y geographic area, - selection by service, - selection by user, - Outputs from ail data inquiries should be ordered according to fields specified by the user. a designated frequency or channel, selection by unique record identifier, selection by call sign or station identifier. 6.3.6 Validation Vali

30、dation is the process whereby data entered into the BASMS is tested to see that it is permissible or appropriate. The BASMS should include validation on every input field using information in user-controllable validation tables. 6.3.7 Record scatus Information in the BASMS data files will be subject

31、 to continual change. For planning purposes, the BASMS recognize multiple record status categories (although records will not necessarily be kept in different files matching these categories). Provision should be made to assign and track record status. Status attributes should be user assignable, bu

32、t will typically identifj processing status like preliminary processing, hold for data correction, hold for coordination, approved, etc. 6.3.8 Program parameters modification The program should be as simple as possible to maintain and modify. Modifications that are allowed should be minimal. 6.3.9 C

33、ompatibility with other databasefiles The issue of compatibility should be considered. 6.3. IO Data content Recommendation ITU-R SM.667 presents specifications for data items to be included in a spectrum management database. The BASMS should optionally provide for the import and export of data in th

34、e specified formats. For internal use, such data should be stored in that format most efficient for the specific applications. For efficiency consider total data storage requirements, data precision requirements, and needs for processing speed. In general, data should be stored in compact, internal

35、format until required for some external application. Display formats should be chosen as appropriate to individual output forms. The standard group of data elements in Recommendation ITU-R SM.667 should be used as guidelines for the selection and definition of data items to be included in the BASMS

36、database. Data elements should include those required for BR notification. The BASMS should provide facilities to import data from the International Frequency List on CD-ROM and from the Radiocommunication Information CirculadLocai Frequency List. 6.4 Documentation A complete users manual should be

37、supplied. The manual should include a description of all operating features of the program sufficient to allow a user untrained in the use of the program: - - - - - to spec the computer required for the use of this program, to install this program on the computer, to explain the procedure used to ar

38、rive at a frequency assignment, to train others in the proper use of the program, to change the parameters which control the operation of the program through the use of user chanseable data tables, to back up and archive data as required to ensure data security. - 100 Rec. ITU-R SM.1048 6.5 Hardware

39、hofhvare environment The BASMS should be designed to run on minimally configured MS-DOS computers with at least 6 Mbyte of random access memory. Windows could optionally be used since it is likely that future ITLJ software will be developed for this environment. Typical computer systems for this application are expected to meet at least the following specifications: - 80386 processor, - 120 Mbyte hard disk, - VGA colour monitor, +, - printer, - Co-processor (option.