GMKOREA EDS-T-4101-2008 OPTICAL DISTORTION TEST OF SAFETY GLASS FOR ROAD VEHICLES.pdf

《GMKOREA EDS-T-4101-2008 OPTICAL DISTORTION TEST OF SAFETY GLASS FOR ROAD VEHICLES.pdf》由会员分享，可在线阅读，更多相关《GMKOREA EDS-T-4101-2008 OPTICAL DISTORTION TEST OF SAFETY GLASS FOR ROAD VEHICLES.pdf（5页珍藏版）》请在麦多课文档分享上搜索。

1、GM DAEWOO Auto in the initial state, after the duration at room temperature, after the duration at a high temperature, and after the duration at a low temperature. 7.7.2. Requirements Unless otherwise specified in the drawings, the working time after and before duration test must be within 1.50.5 se

2、conds. 7.8. Operation durability test 7.8.1. Test method Making opening/closing of a lid 1 cycle, the test shall be conducted in the following order at a speed of 6 cycles/1 min. Test Order Temperature Cycle number 1 Room temperature 6,000 2 70 500 3 -30 500 7.8.2. Requirement After the test under e

3、ach temperature condition, there shall be no change in shape, breaks, noise, cracks. 8. CODING SYSTEM This specification shall be specified in drawings or specifications as follows: “The parts must comply with EDS-T-4101.” Other additional requirements than this standard must be specified in the drawings and may be given priority over the standard. 9. RELATED STANDARDS EDS-T-7041 Test method of instrument panel EDS-T-7503 Test method of impact resistance of plastic components EDS-T-7415 Test method for determing color fastness to artifical light