FORD WSS-M2C153-F-2009 OIL ENGINE ILSAC GF-1 API CERTIFIED FOR GASOLINE ENGINES SERVICE FILL TO BE USED WITH FORD WSS-M99P1111-A 《服务中注入型汽油发动机用经API认证的ILSAC GF-1发动机油 与标准FORD WSS-M.pdf

《FORD WSS-M2C153-F-2009 OIL ENGINE ILSAC GF-1 API CERTIFIED FOR GASOLINE ENGINES SERVICE FILL TO BE USED WITH FORD WSS-M99P1111-A 《服务中注入型汽油发动机用经API认证的ILSAC GF-1发动机油 与标准FORD WSS-M.pdf》由会员分享，可在线阅读，更多相关《FORD WSS-M2C153-F-2009 OIL ENGINE ILSAC GF-1 API CERTIFIED FOR GASOLINE ENGINES SERVICE FILL TO BE USED WITH FORD WSS-M99P1111-A 《服务中注入型汽油发动机用经API认证的ILSAC GF-1发动机油 与标准FORD WSS-M.pdf（1页珍藏版）》请在麦多课文档分享上搜索。

1、 ENGINEERING MATERIAL SPECIFICATIONDate Action Revisions 2009 11 11 N-STATUS No known use. No Replacement Named D. DiGregorio, NA 2004 05 18 Revised Para 3.0 inserted 1995 06 08 Activated R. Romano Printed copies are uncontrolled Copyright 2009, Ford Global Technologies, LLC Page 1 of 1 OIL, ENGINE,

2、 ILSAC GF-1, API CERTIFIED WSS-M2C153-F FOR GASOLINE ENGINES, SERVICE FILL NOT TO BE USED FOR NEW DESIGN 1. SCOPE This material specification defines the minimum acceptable performance requirements and physical/chemical properties of engine oils to be used in Ford Motor Company vehicles. 2. APPLICAT

3、ION This specification was released originally for service fill engine oils meeting 1996 Model Vehicle Warranty Requirements. These materials are used for the lubrication of spark ignition engines using gasolines. 3. REQUIREMENTS 3.0 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers

4、and part producers must conform to the Companys Standard Requirements For Production Materials (WSS-M99P1111-A). 3.1 PERFORMANCE Shall meet all the requirements of “The ILSAC Minimum Performance Standard for Passenger Car Engine Oils GF-1“ and shall be licensed to display the API Certification Mark.

5、 3.2 PHYSICAL/CHEMICAL PROPERTIES 3.2.1 Copper Corrosion, max 1b (Dark Orange) (ASTM D 130 or ISO 2160, 3 h at 100 C) 3.2.2 Gelation Index 8.5 max (ASTM D 5133, Scanning Brookfield) 3.2.3 Seal Compatibility Shall be compatible with all current production component materials. 3.3 QUALIFICATION It is

6、the suppliers responsibility to have the technical evidence and documentation certifying that a given formulation (base oil/ additive combination) meets all requirements described in the specification. The affected Materials Engineering activity reserves the right to request certification documentation from any company claiming to meet this specification.