FORD WSS-M11G45-A1-2008 DECORATIVE WOOD VENEER PRESTAINED AMERICAN CHERRY-PRUNUS SEROTINA CROWN CUT TO BE USED WITH FORD WSS-M99P1111-A 《纹路切割的野黑樱(PRUNUS SEROTINA)木预先着色饰面薄板 与标准FO.pdf

《FORD WSS-M11G45-A1-2008 DECORATIVE WOOD VENEER PRESTAINED AMERICAN CHERRY-PRUNUS SEROTINA CROWN CUT TO BE USED WITH FORD WSS-M99P1111-A 《纹路切割的野黑樱(PRUNUS SEROTINA)木预先着色饰面薄板 与标准FO.pdf》由会员分享，可在线阅读，更多相关《FORD WSS-M11G45-A1-2008 DECORATIVE WOOD VENEER PRESTAINED AMERICAN CHERRY-PRUNUS SEROTINA CROWN CUT TO BE USED WITH FORD WSS-M99P1111-A 《纹路切割的野黑樱(PRUNUS SEROTINA)木预先着色饰面薄板 与标准FO.pdf（1页珍藏版）》请在麦多课文档分享上搜索。

1、 ENGINEERING MATERIAL SPECIFICATIONDate Action Revisions 2008 01 29 Actvated A. Knell Printed copies are uncontrolled Copyright 2008, Ford Global Technologies, LLC Page 1 of 1 DECORATIVE WOOD VENEER, PRESTAINED AMERICAN CHERRY-PRUNUS WSS-M11G45-A1 SEROTINA, CROWN CUT DECORATIVE WOOD VENEER, PRESTAIN

2、ED AMERICAN CHERRY-PRUNUS WSS-M11G45-A2 SEROTINA, QUARTER CUT 1. SCOPE These specifications define wood veneers for use as decorative product on interior wood veneer assemblies. A = Prestained American Cherry-Prunus Serotina, Crown Cut A2 = Prestained American Cherry-Prunus Serotina, Quarter Cut 2.

3、APPLICATION These specifications were released for materials used for wooden decorative automotive components. Application of lacquer and other products will need to be considered to provide a suitable finished product. 3. REQUIREMENTS Material specification requirements are to be used for initial q

4、ualification of materials. When in the fully assembled form the veneer assembly must comply with the Material performance requirements as specified on the engineering drawing. 3.1 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standa

5、rd Requirements For Production Materials (WSS-M99P1111-A). 3.2 MATERIAL PROPERTIES 3.2.1 Appearance Color, feature and grain to be as per Master samples 3.2.2 Thickness Nominal thickness - 0.6mm 3.2.3 Moisture content 11 - 18% 3.2.4 Density A/A2 610 +/- 50 kg/m-33.3 PERFORMANCE PROPERTIES Veneer selected for its attractive appearance should be uniform in thickness, smooth, flat, free from decay and have face grain suitable for the intended face grade.