ETSI TS 122 030-2018 Digital cellular telecommunications system (Phase 2+) (GSM) Universal Mobile Telecommunications System (UMTS) LTE Man-Machine Interface (MMI) of the User Equip.pdf

《ETSI TS 122 030-2018 Digital cellular telecommunications system (Phase 2+) (GSM) Universal Mobile Telecommunications System (UMTS) LTE Man-Machine Interface (MMI) of the User Equip.pdf》由会员分享，可在线阅读，更多相关《ETSI TS 122 030-2018 Digital cellular telecommunications system (Phase 2+) (GSM) Universal Mobile Telecommunications System (UMTS) LTE Man-Machine Interface (MMI) of the User Equip.pdf（30页珍藏版）》请在麦多课文档分享上搜索。

1、 ETSI TS 122 030 V15.0.0 (2018-07) Digital cellular telecommunications system (Phase 2+) (GSM); Universal Mobile Telecommunications System (UMTS); LTE; Man-Machine Interface (MMI) of the User Equipment (UE) (3GPP TS 22.030 version 15.0.0 Release 15) TECHNICAL SPECIFICATION ETSI ETSI TS 122 030 V15.0

2、.0 (2018-07)13GPP TS 22.030 version 15.0.0 Release 15Reference RTS/TSGS-0122030vf00 Keywords GSM,LTE,UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre l

3、a Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document s

4、hall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETS

5、I Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present doc

6、ument, please send your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by w

7、ritten permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. ETSI 2018. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are trademarks of E

8、TSI registered for the benefit of its Members. 3GPPTM and LTETMare trademarks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. oneM2M logo is protected for the benefit of its Members. GSMand the GSM logo are trademarks registered and owned by the GSM Associa

9、tion. ETSI ETSI TS 122 030 V15.0.0 (2018-07)23GPP TS 22.030 version 15.0.0 Release 15Intellectual Property Rights Essential patents IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicl

10、y available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI We

11、b server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may

12、 become, essential to the present document. Trademarks The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners. ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no right to use o

13、r reproduce any trademark and/or tradename. Mention of those trademarks in the present document does not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks. Foreword This Technical Specification (TS) has been produced by ETSI 3rd Generation Part

14、nership Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as being references to the corresponding ETSI deliverables. The cross reference between GSM, UMTS, 3GPP and ETSI i

15、dentities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (V

16、erbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 122 030 V15.0.0 (2018-07)33GPP TS 22.030 version 15.0.0 Release 15Contents Intellectual Property Rights 2g3Foreword . 2g3Modal verbs terminology

17、 2g3Foreword . 5g31 Scope 6g32 References 6g33 Definitions and abbreviations . 7g33.1 Definitions 7g33.2 Abbreviations . 7g34 General . 7g34.1 Basic philosophy 7g35 Physical user input features 7g35.1 General . 7g35.2 MMI related to UE features 8g36 Procedures 9g36.1 General . 9g36.2 UE access . 9g3

18、6.3 Definition of functions . 9g36.4 Call Control 9g36.4.1 General 9g36.4.2 Voice calls 9g36.4.2.1 Mobile originated calls 9g36.4.2.2 Emergency calls 10g36.4.2.3 Mobile terminated calls . 10g36.5 Supplementary Services Control 10g36.5.1 General 10g36.5.2 Structure of the MMI 10g36.5.3 Handling of su

19、pplementary services . 12g36.5.3.1 Handling of defined supplementary services 12g36.5.3.2 Handling of not-implemented supplementary services . 12g36.5.4 Registration of new password . 15g36.5.5 Handling of supplementary services within a call 15g36.5.5.1 Call Deflection, Call Waiting, Call Hold, Mul

20、tiParty Services, Explicit Call Transfer and Completion of Calls to Busy Subscriber general principles 15g36.5.5.2 Call Waiting (CW) 16g36.5.5.3 Call hold 16g36.5.5.4 MultiParty . 16g36.5.5.5 Explicit Call Transfer 17g36.5.5.6 Special case . 17g36.5.5.7 Call Deflection 17g36.5.5.8 Completion of call

21、s to busy subscribers 17g36.5.6 Other handling of supplementary services 17g36.5.6.1 Multiple Subscriber Profile . 17g36.5.6.1.1 Registering an alternative profile. 17g36.5.6.1.2 Selecting an alternative profile on a per call basis . 18g36.5.6.2 Calling Line Identification Presentation (CLIP) . 18g3

22、6.6.6.2.1 Presentation of Information . 18g36.5.6.3 Follow Me (FM) 18g36.6 SIM/USIM interfaces . 18g36.6.1 Entry of PIN and PIN2 18g36.6.2 Change of PIN or PIN2 . 18g36.6.3 Unblocking of PIN or PIN2 18g36.6.4 Reading the abbreviated dialling code 19g3ETSI ETSI TS 122 030 V15.0.0 (2018-07)43GPP TS 22

23、.030 version 15.0.0 Release 156.6.5 Status information - return codes 19g36.7 Presentation of IMEI 19g36.8 In Case of Emergency access procedure 19g36.9 Presentation of e-marking 19g3Annex A (normative): UE access mealy graph 21g3Annex B (normative): Codes for defined Supplementary Services . 23g3An

24、nex C (normative): Codes for Tele- and bearer services . 26g3Annex D (informative): Change history 28g3History 29g3ETSI ETSI TS 122 030 V15.0.0 (2018-07)53GPP TS 22.030 version 15.0.0 Release 15Foreword This Technical Specification has been produced by the 3rdGeneration Partnership Project (3GPP). T

25、he contents of the present document are subject to continuing work within the TSG and may change following formal TSG approval. Should the TSG modify the contents of the present document, it will be re-released by the TSG with an identifying change of release date and an increase in version number a

26、s follows: Version x.y.z where: x the first digit: 1 presented to TSG for information; 2 presented to TSG for approval; 3 or greater indicates TSG approved document under change control. y the second digit is incremented for all changes of substance, i.e. technical enhancements, corrections, updates

27、, etc. z the third digit is incremented when editorial only changes have been incorporated in the document. ETSI ETSI TS 122 030 V15.0.0 (2018-07)63GPP TS 22.030 version 15.0.0 Release 151 Scope The present document defines the requirements for and gives guidelines on the MMI on the User Equipment (

28、UE). This includes the requirements of the user procedures for call control and supplementary service control, the requirements on the physical input media and the output, such as indications and displayed information. Some clauses of the present document include the requirements that are applicable

29、 only to UE connected to CS Domain. See 3GPP TS 22.101 18; for overall service principles and 3GPP TS 22.001 19 for Circuit telecommunication services. 2 References The following documents contain provisions which, through reference in this text, constitute provisions of the present document. Refere

30、nces are either specific (identified by date of publication, edition number, version number, etc.) or non-specific. For a specific reference, subsequent revisions do not apply. For a non-specific reference, the latest version applies. In the case of a reference to a 3GPP document (including a GSM do

31、cument), a non-specific reference implicitly refers to the latest version of that document in the same Release as the present document. 1 3GPP TR 21.905: “Vocabulary for 3GPP Specifications“. 2 3GPP TS 22.004: “General on supplementary services“. 3 3GPP TS 22.011: “Service accessibility“. 4 3GPP TS

32、22.016: “International Mobile station Equipment Identities (IMEI)“. 5 3GPP TS 22.083: “Call Waiting (CW) and Call Hold (HOLD) supplementary services Stage 1“. 6 3GPP TS 22.084: “MultiParty (MPTY) supplementary services Stage 1“. 7 3GPP TS 22.090: “Stage 1 description of Unstructured Supplementary Se

33、rvice Data (USSD)“. 8 3GPP TS 23.038: “Alphabets and language“. 9 3GPP TS 24.008: “Mobile radio interface layer 3 specification; Core Network Protocols Stage 3“. 10 3GPP TS 24.080: “Mobile radio interface layer 3 supplementary services specification Formats and coding“. 11 3GPP TS 29.002 : “Mobile A

34、pplication Part (MAP)“. 12 3GPP TS 22.081: “Line Identification Supplementary Services Stage 1“. 13 ITU-T Recommendation E.164: “Numbering plan for the ISDN era“. 14 ITU-T Recommendation E.121: “Pictograms and symbols to assist users of the telephone service“. 15 3GPP TS 22.072: “Call Deflection; St

35、age 1“. 16 3GPP TS 22.091: “Explicit Call Transfer Supplementary Service; Stage 1“. 17 3GPP TS 22.093: “Call Completion to Busy Subscriber (CCBS); Stage 1“. 18 3GPP TS 22.101: “Service principles“. 19 3GPP TS 22.001: “Principles of circuit telecommunication services supported by a Public Land Mobile

36、 Network (PLMN)“. ETSI ETSI TS 122 030 V15.0.0 (2018-07)73GPP TS 22.030 version 15.0.0 Release 1520 3GPP TS 22.094: “Follow Me Service description Stage 1“. 21 3GPP TS 22.135: “Multicall supplementary service Stage 1“. 3 Definitions and abbreviations 3.1 Definitions For the purposes of the present d

37、ocument, the following definition applies: Directory Number: A string consisting of one or more of the characters from the set 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, *, #, a, b, c associated with a nature of address indicator and number plan indicator. When using the public MMI for the control of supplementa

38、ry services however, * and # cannot be part of any SC or SI field. NOTE 1: No such restriction on the SC and SI fields exists when using other (e.g. menu-driven) MMI for the control of supplementary services. NOTE 2: When using the public MMI, certain limitations on the use of one and two digit dire

39、ctory numbers may apply. The use of other MMI can remove these restrictions. NOTE 3: This definition is not intended to require the support of all these characters in the MMI itself. 3.2 Abbreviations For the purposes of the present document, the abbreviations listed in 3GPP TR 21.905 18 apply. 4 Ge

40、neral 4.1 Basic philosophy The basic idea behind the present document is that it should give a minimum level of requirements, with emphasis on items which are seen as important from a usage point of view. This means, that the requirements are mainly dealing with standardized control procedures of ac

41、cess to services i.e. call establishment, invocation of supplementary services and so on. The requirements on the physical layout of input and output features are kept to a minimum to allow for differentiated types of Ues and to ease the introduction of future developments in the area of MMI. The st

42、andardized control procedures describe the sequence of real actions to be taken by the users. However, since the requirements on the physical input features are minimal the control procedures may differ between Ues depending on the solution of the manufacturers. The “bridge“ between these requiremen

43、ts is however that the same logical actions have to be taken by the user. That is, the user has to provide the same information for the call control and signalling no matter what the method is. This is also valid if an automatic device is used for carrying out the same actions. The logical procedure

44、s are therefore defined and standardized in the present document. Optionally, the user may set the ME to disable some or all of the MMI functions defined in the present document. This setting shall only apply when the same SIM/USIM is in use otherwise the ME shall enable the standard MMI. 5 Physical

45、 user input features 5.1 General This clause gives the requirements or guidelines for the MMI of the input related UE features. Basic requirements on these features are given in 3GPP TS 22.101 18. ETSI ETSI TS 122 030 V15.0.0 (2018-07)83GPP TS 22.030 version 15.0.0 Release 155.2 MMI related to UE fe

46、atures * Country/PLMN selection: The method is manufacturer optional. * International Access Function (“+“ key): and * Keypad: The physical means of entering the characters 0-9, +, * and # (i.e. the SELECT function) may be keypad, voice input device, DTE or other, but there must be means to enter th

47、is information. The relationship on the keypad between the numbers and letters (where used) is important when mnemonic dialling may be used. The following relationship is therefore preferred though optional. 1 6 MNO 2 ABC 7 PQRS 3 DEF 8 TUV4 GHI 9 WXYZ 5 JKL 0 * ACCEPT, SEND and END functions: The p

48、hysical means to perform these functions may be keypad, voice input device, DTE or other, but there must be means to perform these functions. ACCEPT and SEND may use the same means. * Setting of called Number Fields (Type of Number), use of the “+“ key function: Users may enter a called number in tw

49、o formats, called here International or Open. The Type of Number (TON) may be set to other values if required, but the procedure for this is not defined here. “International format“: This is entered by starting with a “+“ followed by country code, even for national calls. This method is preferred for roaming and international calls, and highly desirable for storage of short codes or for call-forwarding. This sets the TON to “International“ - see 3GPP TS 24.008 9. “Open format“: This is when the “+“ is not e