ETSI TS 102 587-5-2010 Electromagnetic compatibility and Radio spectrum Matters (ERM) Peer-to-Peer Digital Private Mobile Radio Part 5 Interoperability testing Interoperability Tes.pdf

《ETSI TS 102 587-5-2010 Electromagnetic compatibility and Radio spectrum Matters (ERM) Peer-to-Peer Digital Private Mobile Radio Part 5 Interoperability testing Interoperability Tes.pdf》由会员分享，可在线阅读，更多相关《ETSI TS 102 587-5-2010 Electromagnetic compatibility and Radio spectrum Matters (ERM) Peer-to-Peer Digital Private Mobile Radio Part 5 Interoperability testing Interoperability Tes.pdf（43页珍藏版）》请在麦多课文档分享上搜索。

1、 ETSI TS 102 587-5 V1.3.1 (2010-09)Technical Specification Electromagnetic compatibilityand Radio spectrum Matters (ERM);Peer-to-Peer Digital Private Mobile Radio;Part 5: Interoperability testing; Interoperability Test Suite Structure and Test Purposes (TSS Essential, or potentially Essential, IPRs

2、notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http:/webapp.etsi.org/IPR/home.asp). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarante

3、e can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Technical Specification (TS) has been produced by ETSI Technical Committee Electromagnetic

4、compatibility and Radio spectrum Matters (ERM). The present document is part 5 of a multi-part deliverable covering the Electromagnetic compatibility and Radio spectrum Matters (ERM); Peer-to-Peer Digital Private Mobile Radio, as identified below: Part 1: “Conformance testing; Protocol Implementatio

5、n Conformance Statement (PICS) proforma“; Part 2: “Conformance testing; Test Suite Structure and Test Purposes (TSS Part 3: “Requirements catalogue“; Part 4: “Conformance testing; Abstract Test Suite (ATS)“; Part 5: “Interoperability testing; Interoperability Test Suite Structure and Test Purposes (

6、TSS Part 6: “Interoperability testing; Test Descriptions (TD)“. ETSI ETSI TS 102 587-5 V1.3.1 (2010-09)51 Scope The present document specifies the interoperability Test Purposes (TPs) for the Peer-to-Peer Digital Private Mobile Radio (dPMR) standard, TS 102 490 1. TPs are defined using the TPLan not

7、ation described in ES 202 553 i.1. Test purposes have been written based on the test specification framework described in TS 102 351 2 and based on the methodology defined in ISO/IEC 9646-2 3. 2 References References are either specific (identified by date of publication and/or edition number or ver

8、sion number) or non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the reference document (including any amendments) applies. Referenced documents which are not found to be publicly available in the expected location might be fou

9、nd at http:/docbox.etsi.org/Reference. NOTE: While any hyperlinks included in this clause were valid at the time of publication ETSI cannot guarantee their long term validity. 2.1 Normative references The following referenced documents are necessary for the application of the present document. 1 ETS

10、I TS 102 490 (V1.6.1): “Electromagnetic compatibility and Radio spectrum Matters (ERM); Peer-to-Peer Digital Private Mobile Radio using FDMA with a channel spacing of 6,25 kHz with e.r.p. of up to 500 mW“. 2 ETSI TS 102 351 (V2.1.1): “Methods for Testing and Specification (MTS); Internet Protocol Te

11、sting (IPT); IPv6 Testing: Methodology and Framework“. 3 ISO/IEC 9646-2: “Information technology - Open Systems Interconnection - Conformance testing methodology and framework - Part 2: Abstract Test Suite specification“. 4 ETSI TS 102 587-3: “Electromagnetic compatibility and Radio spectrum Matters

12、 (ERM); Peer-to-Peer Digital Private Mobile Radio; Part 3: Requirements catalogue“. 2.2 Informative references The following referenced documents are not necessary for the application of the present document but they assist the user with regard to a particular subject area. i.1 ETSI ES 202 553: “Met

13、hods for testing and Specification (MTS); TPLan: A notation for expressing test Purposes“. 3 Abbreviations For the purposes of the present document, the following abbreviations apply: CF (Test) ConFiguration CSF Configured Services and Facilities dPMR digital Private Mobile Radio ISDM Individual Sho

14、rt Data Message ISF Initial Services and Facilities OACSU Off Air Call Set-Up PTT Push To Talk RC Requirements Catalogue ETSI ETSI TS 102 587-5 V1.3.1 (2010-09)6RQ ReQuirement TP Test Purpose TSS Test Suite Structure 4 Test Suite Structure (TSS) The Test Suite Structure is based on the dPMR Requirem

15、ents Catalogue 4. It is defined by the groups within the following TPLan specification of test purposes. The numbering is not contiguous so that new TPs can be added at a later date without the need to completely renumber the TSS groups. The test purposes have been divided into three groups: Group 1

16、: Common requirements. Group 2: CSF requirements. Group 3: ISF requirements. The sub-grouping of these three group follows the structure of the RC. Some of the sub-groups of the RC contained no testable requirement. Headings for those sub-groups are in this test purpose document in the node group to

17、 give a full view on the relation between RQ and TSS&TP. Group 1 “ISF CSF Common“ Group 1.1 “All Call“ Group 1.2 “Channel Access“ Group 1.3 “Framing“ Group 1.3.1 “End frame“ Group 1.3.2 “Header frames“ Group 1.3.2.1 “Call information field“ Group 1.3.3 “Packet data frame“ Group 1.3.4 “Superframe“ Gr

18、oup 1.3.4.1 “Type 1 data“ Group 1.3.4.2 “Type 2 data“ Group 1.3.4.3 “Voice“ Group 1.4 “Late Entry“ Group 1.5 “Powersave“ Group 1.6 “Talking Party ID“ Group 2 “CSF“ Group 2.1 “Broadcast Call“ Group 2.2 “Dialling Plan“ Group 2.3 “Individual Short Data Message“ Group 2.3.1 “ISDM Free Text Message“ Grou

19、p 2.3.2 “ISDM Precoded Message“ Group 2.3.3 “ISDM Short File Transfer“ Group 2.3.4 “ISDM Status Message“ Group 2.4 “OACSU“ Group 2.5 “Short Appended Data“ Group 2.6 “Slow User Data“ Group 2.7 “Type 3 data“ Group 3 “ISF“ 5 Test Purposes (TP) The test purposes have been written in the formal notation

20、TPlan. Configurations that are referenced by test purposes are shown in annex A. TPLan user definitions are listed in annex B. 5.1 ISF CSF Common Group 1 ISF CSF Common 5.1.1 All Call Group 1.1 All Call TP id : TP_PMR_0824_01 ETSI ETSI TS 102 587-5 V1.3.1 (2010-09)7summary : Support of all call with

21、 any specific callee ID RQ ref : RQ_001_0824 TP type : interoperability Role : ISF config ref: CF_ISF_01_I - ISF QE1 and EUT TD ref : TBD with QE1 and EUT in standby and using_compatible_vocoders ensure that when QE1 uses Common_ID 255 and EUT uses another Common_ID and QE1_User makes a Call to EUT

22、then EUT_User receives the Call - xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx TP id : TP_PMR_0824_02 summary : All call with all call callee ID RQ ref : RQ_001_0824 TP type : interoperability Role : ISF config ref: CF_ISF_01_I - ISF QE1 and EUT TD ref : TBD with QE1 and EUT in stan

23、dby and using_compatible_vocoders ensure that when QE1 and EUT using Common_ID 255 and QE1_User makes a Call to EUT then EUT_User receives the Call - xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx TP id : TP_PMR_0858_01 summary : All call with all call callee ID RQ ref : RQ_001_0858 T

24、P type : interoperability Role : ISF config ref: CF_ISF_01_I - ISF QE1 and EUT TD ref : TBD with QE1 and EUT in standby and using_compatible_vocoders ensure that when EUT uses Common_ID 255 and QE1 uses another Common_ID and QE1_User makes a Call then EUT_User does not receive the Call - xxxxxxxxxxx

25、xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx TP id : TP_PMR_0858_02 summary : All call with all call callee ID RQ ref : RQ_001_0858 TP type : interoperability Role : ISF config ref: CF_ISF_01_I - ISF QE1 and EUT TD ref : TBD with QE1 and EUT in standby and using_compatible_vocoders ensure that

26、 when EUT uses Common_ID 255 and QE1 uses Common_ID 255 and QE1_User makes a Call then EUT_User does receive the Call - xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx End group 1.1 ETSI ETSI TS 102 587-5 V1.3.1 (2010-09)85.1.2 channel access Group 1.2 Channel Access TP id : TP_PMR_100

27、6_01 summary : Automatic call termination within 180 seconds RQ ref : RQ_001_1006 TP type : interoperability Role : ISF config ref: CF_ISF_01_I - ISF QE1 and EUT TD ref : TBD with (EUT and QE1 using same Common_ID and powersave_disabled and using_compatible_vocoders) and QE1 and EUT in standby ensur

28、e that when EUT_User makes a PTT_Call and PTT_Key is not released then QE1_User receives PTT_Call and EUT terminates the PTT_Call after 180 seconds - xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx TP id : TP_PMR_1006_02 summary : Automatic call termination within 180 seconds RQ ref :

29、RQ_001_1006 TP type : interoperability Role : CSF config ref: CF_CSF_01_I - CSF QE1 and EUT TD ref : TBD with (EUT and QE1 powersave_disabled and using_compatible_vocoders) QE1 in standby ensure that when EUT_User makes a Voice_Transmission addressed to QE1 and PTT_Key is not released then QE1_User

30、receives Voice_Transmission and EUT terminates the Voice_Transmission after 180 seconds - xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx TP id : TP_PMR_1006_03 summary : Automatic call termination within 180 seconds and call resume RQ ref : RQ_001_1006 TP type : interoperability Role

31、: ISF config ref: CF_ISF_01_I - ISF QE1 and EUT TD ref : TBD with (EUT and QE1 using same Common_ID and powersave_disabled and using_compatible_vocoders) and EUT in call_timeout_terminated ensure that when EUT_User releases and presses PTT_Key again then QE1_User receives PTT_Call - xxxxxxxxxxxxxxxx

32、xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx TP id : TP_PMR_1006_04 summary : Automatic call termination within 180 seconds and call resume RQ ref : RQ_001_1006 TP type : interoperability Role : CSF config ref: CF_CSF_01_I - CSF QE1 and EUT TD ref : TBD with (EUT and QE1 powersave_disabled) and EUT

33、 in call_timeout_terminated ensure that when EUT_User releases and presses the PTT_Key again then QE1_User receives Voice_Transmission ETSI ETSI TS 102 587-5 V1.3.1 (2010-09)9- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx TP id : TP_PMR_1008_01 summary : Channel access in own call R

34、Q ref : RQ_001_1008 TP type : interoperability Role : ISF config ref: CF_ISF_02_I - ISF QE1, QE2 and EUT TD ref : TBD with (EUT and QE1 and QE2) using the same Common_ID and using_compatible_vocoders) and QE1 is transmitting ensure that when EUT_User makes PTT_Call then QE2_User receives the PTT_Cal

35、l from EUT - xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx TP id : TP_PMR_1008_02 summary : Channel access in own call RQ ref : RQ_001_1008 TP type : interoperability Role : CSF config ref: CF_CSF_02_I - CSF QE1, QE2 and EUT TD ref : TBD with (EUT and QE1 and QE2) using the same call

36、_group and using_compatible_vocoders) and QE1 is transmitting Voice_Transmission to EUT ensure that when EUT_User makes a Voice_Transmission to QE2 then QE2_User receives the Voice_Transmission from EUT - xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx TP id : TP_PMR_1009_01 summary :

37、Channel access when ISF polite to own colour code RQ ref : RQ_001_1009 TP type : interoperability Role : ISF config ref: CF_ISF_02_I - ISF QE1, QE2 and EUT TD ref : TBD with (EUT and QE1 and QE2) using same Common_ID and using_compatible_vocoders) and and using same colour_code ) and EUT is polite_t

38、o_own_CC and QE1 is transmitting to QE2 ensure that when EUT_User makes PTT_Call then QE2_User does not receive PTT_Call from EUT - xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx TP id : TP_PMR_1010_01 summary : Channel access when ISF impolite RQ ref : RQ_001_1010 TP type : interoper

39、ability Role : ISF config ref: CF_ISF_02_I - ISF QE1, QE2 and EUT TD ref : TBD with (EUT and QE1 and QE2) using_compatible_vocoders) and (EUT and QE2 using the same Common_ID) and (EUT and QE1 not using the same Common_ID) and EUT is impolite and QE1 is transmitting ensure that when EUT_User makes P

40、TT_Call then QE2_User receives PTT_Call from EUT - xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx ETSI ETSI TS 102 587-5 V1.3.1 (2010-09)10TP id : TP_PMR_1011_01 summary : Channel access when polite to own group and channel occupied by members of own group RQ ref : RQ_001_1011 TP type

41、 : interoperability Role : CSF config ref: CF_CSF_02_I - CSF QE1, QE2 and EUT TD ref : TBD with (EUT and QE1 and QE2) using same colour_code ) and (EUT and QE1 and QE2) are member of same talkgroup) and EUT is polite_to_own_group and QE1 is transmitting to QE2 ensure that when EUT_User makes a Voice

42、_Transmission to QE2 then QE2_User receives Voice_Transmission from QE1 - Indicating EUT does NOT transmit - xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx TP id : TP_PMR_1012_01 summary : Repeated acknowledgements when RF channel is busy RQ ref : RQ_001_1012 TP type : interoperabilit

43、y Role : CSF config ref: CF_CSF_02_I - CSF QE1, QE2 and EUT TD ref : TBD with (EUT and QE1 and QE2) using same colour_code ) and (EUT and QE2) are member of same talkgroup) and QE1 is transmitting ensure that when QE2_User makes a connect_request to EUT then QE2_User receives no more than four ackno

44、wledgement from EUT - xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx TP id : TP_PMR_1013_01 summary : Channel access when CSF polite to own colour code RQ ref : RQ_001_1013 TP type : interoperability Role : CSF config ref: CF_CSF_02_I - CSF QE1, QE2 and EUT TD ref : TBD with (EUT and

45、QE1 and QE2) using the same colour_code and using_compatible_vocoders) and QE1 is transmitting Voice_Transmission to QE2 EUT is polite_to_own_CC ensure that when EUT_User makes Voice_Transmission addressed to QE2 then QE2_User does not receive Voice_Transmission from EUT - xxxxxxxxxxxxxxxxxxxxxxxxxx

46、xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx TP id : TP_PMR_1014_01 summary : Channel access when CSF impolite RQ ref : RQ_001_1014 TP type : interoperability Role : CSF config ref: CF_CSF_02_I - CSF QE1, QE2 and EUT TD ref : TBD with (EUT and QE1 and QE2) using_compatible_vocoders) and QE1 is transmitting V

47、oice_Transmission to QE2 and EUT is impolite ensure that when EUT_User makes Voice_Transmission addressed to QE2 then QE2_User receives Voice_Transmission from EUT - xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx End group 1.2 ETSI ETSI TS 102 587-5 V1.3.1 (2010-09)115.1.3 framing Gro

48、up 1.3 Framing - No TP specified 5.1.3.1 end frame Group 1.3.1 End frame - No TP specified End group 1.3.1 5.1.3.2 header frames Group 1.3.2 Header frames - No TP specified 5.1.3.2.1 call information field Group 1.3.2.1 Call information field - No TP specified End group 1.3.2.1 End group 1.3.2 5.1.3.3 packet data frame Group 1.3.3 Packet data frame - No TP specified End group 1.3.3 5.1.3.4 superframe Group 1.3.4 Superframe 5.1.3.4.1 type 1 data Group 1.3.4.1 Type 1 data