ETSI TS 100 950-2003 Digital Cellular Telecommunications System (Phase 2+) Mobile Radio Interface Layer 3 - Supplementary Services Specification Formats and Coding《数字蜂窝通信系统(第2+阶段) _1.pdf

《ETSI TS 100 950-2003 Digital Cellular Telecommunications System (Phase 2+) Mobile Radio Interface Layer 3 - Supplementary Services Specification Formats and Coding《数字蜂窝通信系统(第2+阶段) _1.pdf》由会员分享，可在线阅读，更多相关《ETSI TS 100 950-2003 Digital Cellular Telecommunications System (Phase 2+) Mobile Radio Interface Layer 3 - Supplementary Services Specification Formats and Coding《数字蜂窝通信系统(第2+阶段) _1.pdf（55页珍藏版）》请在麦多课文档分享上搜索。

1、 ETSI TS 100 950 V7.4.1 (2003-09)Technical Specification Digital cellular telecommunications system (Phase 2+);Mobile Radio Interface Layer 3 -Supplementary services specification formats and coding(3GPP TS 04.80 version 7.4.1 Release 1998)GLOBAL SYSTEM FOR MOBILE COMMUNICATIONSRfloppy3 ETSI ETSI TS

2、 100 950 V7.4.1 (2003-09) 1 3GPP TS 04.80 version 7.4.1 Release 1998 Reference RTS/TSGN-040480v741 Keywords GSM ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregi

3、stre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice Individual copies of the present document can be downloaded from: http:/www.etsi.org The present document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in content

4、s between such versions, the reference version is the Portable Document Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document

5、may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http:/portal.etsi.org/tb/status/status.asp If you find errors in the present document, send your comment to: editoretsi.org Copyright Notification No part may be reprodu

6、ced except as authorized by written permission. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2003. All rights reserved. DECTTM, PLUGTESTSTM and UMTSTM are Trade Marks of ETSI registered for the benefit of its Members

7、. TIPHONTMand the TIPHON logo are Trade Marks currently being registered by ETSI for the benefit of its Members. 3GPPTM is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. ETSI ETSI TS 100 950 V7.4.1 (2003-09) 2 3GPP TS 04.80 version 7.4.1 Relea

8、se 1998 Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual

9、Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http:/webapp.etsi.org/IPR/home.asp). Pursuant to the ETSI IPR Policy, no investigation,

10、 including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Technical Specification (

11、TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as being references to the corresponding ETSI deliverables. The c

12、ross reference between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp . ETSI ETSI TS 100 950 V7.4.1 (2003-09) 3 3GPP TS 04.80 version 7.4.1 Release 1998 Contents Intellectual Property Rights2 Foreword.2 Foreword.6 1 Scope 7 1.1 References 7 1.2 Abbrevi

13、ations .8 2 Message functional definitions and contents8 2.1 General .8 2.2 Messages for supplementary services control 8 2.3 Facility9 2.4 Register 9 2.4.1 Register (network to MS direction) 9 2.4.2 Register (MS to network direction) 9 2.4.2.1 SS version .10 2.5 Release complete10 2.5.1 Cause 10 2.

14、5.2 Facility10 3 General message format and information elements coding10 3.1 Overview 11 3.2 Protocol discriminator 11 3.3 Transaction identifier .11 3.4 Message type 11 3.5 Other information elements11 3.6 Facility information element 12 3.6.1 Component (octet 3 etc.).12 3.6.2 Component type tag14

15、 3.6.3 Component ID tag.14 3.6.4 Operation Code.14 3.6.5 Sequence and Set tags.15 3.6.6 Error Code 15 3.6.7 Problem Code .15 3.7 Version handling for supplementary services.16 3.7.1 Supplementary service screening indicator.16 3.7.2 Supplementary service version indicator 16 4 Supplementary services

16、 operation specifications.17 4.1 General .17 4.2 Operation types 18 4.2.1 spare .21 4.2.2 Operation types description 21 4.2.2.1 RegisterSS (MS network)21 4.2.2.2 EraseSS (MS network) 21 4.2.2.3 ActivateSS (MS network) .21 4.2.2.4 DeactivateSS (MS network)21 4.2.2.5 InterrogateSS (MS network) .22 4.

17、2.2.6 NotifySS (network MS) 22 4.2.2.7 RegisterPassword (MS network).22 4.2.2.8 GetPassword (network MS) 22 4.2.2.9 ProcessUnstructuredSS-Data (MS network) .22 4.2.2.10 ProcessUnstructuredSS-Request (MS network)22 4.2.2.11 UnstructuredSS-Request (network MS) 22 4.2.2.12 UnstructuredSS-Notify (networ

18、k MS) 22 4.2.2.13 ForwardCheckSSIndication (network MS) .22 4.2.2.14 ForwardChargeAdvice (network MS).22 ETSI ETSI TS 100 950 V7.4.1 (2003-09) 4 3GPP TS 04.80 version 7.4.1 Release 1998 4.2.2.15 BuildMPTY (MS network) .22 4.2.2.16 HoldMPTY (MS network) 23 4.2.2.17 RetrieveMPTY (MS network).23 4.2.2.

19、18 SplitMPTY (MS network).23 4.2.2.19 ForwardCUG-Info (MS network) .23 4.2.2.20 ExplicitCT (MS Network).23 4.2.2.21 AccessRegisterCCEntry (MS Network)23 4.2.2.22 CallDeflection (MS Network).23 4.2.2.23 UserUserService (MS Network, Network MS) .23 4.2.2.24 LCS-LocationNotification (network MS) .23 4.

20、2.2.25 LCS-MOLR (MS Network) 23 4.3 Error types23 4.3.1 Error types ASN.1 specification .23 4.3.2 Error types description24 4.3.2.1 UnknownSubscriber24 4.3.2.2 BearerServiceNotProvisioned .24 4.3.2.3 TeleServiceNotProvisioned.24 4.3.2.4 IllegalSS-Operation.24 4.3.2.5 SS-ErrorStatus.24 4.3.2.6 SS-Not

21、Available .24 4.3.2.7 SS-SubscriptionViolation25 4.3.2.8 SS-Incompatibility 25 4.3.2.9 SystemFailure25 4.3.2.10 DataMissing 25 4.3.2.11 UnexpectedDataValue.25 4.3.2.12 PasswordRegistrationFailure.25 4.3.2.13 NegativePasswordCheck.25 4.3.2.14 FacilityNotSupported 25 4.3.2.15 ResourcesNotAvailable.25

22、4.3.2.16 MaxNumberOfMPTY-ParticipantsExceeded .25 4.3.2.17 CallBarred .26 4.3.2.18 NumberOfPW-AttemptsViolation 26 4.3.2.19 AbsentSubscriber 26 4.3.2.20 IllegalSubscriber .26 4.3.2.21 IllegalEquipment.26 4.3.2.22 USSD-Busy.26 4.3.2.23 UnknownAlphabet 26 4.3.2.24 InvalidDeflectedToNumber 26 4.3.2.25

23、SpecialServiceCode.26 4.3.2.26 DeflectionToServedSubscriber .26 4.3.2.27 RejectedByNetwork 26 4.3.2.28 RejectedByUser 26 4.3.2.29 PositionMethodFailure27 4.4 Data types and identifiers .27 4.4.1 General27 4.4.2 ASN.1 data types 27 4.4.3 Identifiers definition .31 4.4.3.1 chargingInformation31 4.4.3.

24、2 e1.31 4.4.3.3 e2.31 4.4.3.4 e3.31 4.4.3.5 e4.31 4.4.3.6 e5.31 4.4.3.7 e6.31 4.4.3.8 e7.31 4.4.3.9 ss-Code31 4.4.3.10 ss-Notification.31 4.4.3.11 ss-Status 32 4.4.3.12 callIsWaiting-Indicator .32 4.4.3.13 callOnhold-Indicator .32 4.4.3.14 mpty-Indicator.32 4.4.3.15 forwardCUG-InfoArg .32 ETSI ETSI

25、TS 100 950 V7.4.1 (2003-09) 5 3GPP TS 04.80 version 7.4.1 Release 1998 4.4.3.16 cug-Index 32 4.4.3.17 suppressPrefCUG32 4.4.3.18 suppressOA .32 4.4.3.19 clirSuppressionRejected32 4.4.3.20 ect-Indicator 32 4.4.3.21 ect-CallState 32 4.4.3.22 rdn .32 4.4.3.23 presentationAllowedAddress 33 4.4.3.24 pres

26、entationRestricted.33 4.4.3.25 numberNotAvailableDueToInterworking .33 4.4.3.26 presentationRestrictedAddress 33 4.4.3.27 partyNumber .33 4.4.3.28 partyNumberSubaddress .33 4.4.3.29 nameIndicator33 4.4.3.30 namePresentationAllowed.33 4.4.3.31 nameUnavailable.33 4.4.3.32 namePresentationRestricted 33

27、 4.4.3.33 deflectedToNumber.33 4.4.3.34 deflectedToSubaddress .33 4.4.3.35 uUS-Service 34 4.4.3.36 uUS-Required34 4.4.3.37 LocationNotificationArg.34 4.4.3.38 NotificationType .34 4.4.3.39 LocationNotificationRes .34 4.4.3.40 VerificationResponse 34 4.4.3.41 MOLR-Arg34 4.4.3.42 MOLR-Type34 4.4.3.43

28、LocationMethod 34 4.4.3.44 GPSAssistanceData.34 4.4.3.45 MOLR-Res34 4.4.3.46 DecipheringKeys.34 4.5 Operations and errors implementation .34 Annex A (informative): Expanded ASN.1 Module “SS-Protocol“ 37 Annex B (informative): Change Request History52 History 54 ETSI ETSI TS 100 950 V7.4.1 (2003-09)

29、6 3GPP TS 04.80 version 7.4.1 Release 1998 Foreword This Technical Specification (TS) has been produced by the Special Mobile Group (SMG). The present document defines the coding of information necessary for support of supplementary service operation on the mobile radio interface layer 3 within the

30、digital cellular telecommunications system. The contents of the present document are subject to continuing work within SMG and may change following formal SMG approval. Should SMG modify the contents of the present document it will then be re-issued with an identifying change of release date and an

31、increase in version number as follows: Version 7.x.y where: 7 GSM Phase 2+ Release 1998; x the second digit is incremented for all other types of changes, i.e. technical enhancements, corrections, updates, etc.; y the third digit is incremented when editorial only changes have been incorporated in t

32、he specification. ETSI ETSI TS 100 950 V7.4.1 (2003-09) 7 3GPP TS 04.80 version 7.4.1 Release 1998 1 Scope The present document contains the coding of information necessary for support of supplementary service operation on the mobile radio interface layer 3. Clause 2 gives the functional definitions

33、 and contents of messages for call independent supplementary service operations. Messages necessary for support of call related supplementary service operations are defined in GSM 04.08. Clause 3 gives the general format and coding for messages used for call independent supplementary service and the

34、 format and coding of information elements used for both call related and call independent supplementary service operations. Clause 4 gives the specification of the call related and call independent supplementary service operations. 1.1 References The following documents contain provisions which, th

35、rough reference in this text, constitute provisions of the present document. References are either specific (identified by date of publication, edition number, version number, etc.) or non-specific. For a specific reference, subsequent revisions do not apply. For a non-specific reference, the latest

36、 version applies. A non-specific reference to an ETS shall also be taken to refer to later versions published as an EN with the same number. For this Release 1998 document, references to GSM documents are for Release 1998 versions (version 7.x.y). 1 GSM 01.04: “Digital cellular telecommunications sy

37、stem (Phase 2+); Abbreviations and acronyms“. 2 GSM 02.24: “Digital cellular telecommunications system (Phase 2+); Description of Charge Advice Information (CAI)“. 3 GSM 04.06: “Digital cellular telecommunications system (Phase 2+); Mobile Station - Base Station System (MS - BSS) interface Data Link

38、 (DL) layer specification“. 4 GSM 04.07: “Digital cellular telecommunications system (Phase 2+); Mobile radio interface signalling layer 3; General aspects“. 5 GSM 04.08: “Digital cellular telecommunications system (Phase 2+); Mobile radio interface layer 3 specification“. 6 GSM 04.10: “Digital cell

39、ular telecommunications system (Phase 2+); Mobile radio interface layer 3; Supplementary services specification; General aspects“. 7 GSM 04.80: “Digital cellular telecommunications system (Phase 2+); Mobile radio interface layer 3 supplementary services specification; Formats and coding“. 8 GSM 04.9

40、0: “Digital cellular telecommunications system (Phase 2+); Unstructured supplementary services operation - Stage 3“. 9 GSM 09.02: “Digital cellular telecommunications system (Phase 2+); Mobile Application Part (MAP) specification“. 10 GSM 09.11: “Digital cellular telecommunications system (Phase 2+)

41、; Signalling interworking for supplementary services“. ETSI ETSI TS 100 950 V7.4.1 (2003-09) 8 3GPP TS 04.80 version 7.4.1 Release 1998 11 CCITT Recommendation X.208: “Specification of basic encoding rules for Abstract Syntax Notation One (ASN.1)“. 12 CCITT Recommendation X.209: “Specification of Ab

42、stract Syntax Notation One (ASN.1)“. 13 CCITT Recommendation Q.773: “Transaction capabilities formats and encoding“. 1.2 Abbreviations Abbreviations used in the present document are listed in GSM 01.04. 2 Message functional definitions and contents 2.1 General This clause defines the structure of th

43、e messages of the layer 3 protocol defined in GSM 04.80. These messages are standard L3 messages as defined in GSM 04.07. Each definition includes: a) a brief description of the message; b) a table listing the information elements in the order of their appearance in the message. In a sequence of con

44、secutive IEs with half octet length, the first IE occupies bits 1 to 4 of octet N, the second bits 5 to 8 of octet N, the third bits 1 to 4 of octet N+1 etc.; For each IE the table indicates: 1) the information element identifier, in hexadecimal notation, if the IE has format T, TV or TLV. If the IE

45、I has half octet length, it is specified by a notation representing the IEI as a hexadecimal digit followed by a “-“ (example: B-); 2) the name of the IE (which gives an idea of the semantics of the element), which is used in this and other specifications as a reference to the IE within the message;

46、 3) the name of the type of the IE (which indicates the coding of the value part of the IE), and a reference to a description of the value part of the IE; 4) the presence requirement indication (M, C or O) for the IE, as defined in GSM 04.07; 5) the format of the IE (T, V, TV, LV, TLV) as defined in

47、 GSM 04.07; 6) the length of the IE (or permissible range of lengths), in octets, in the message, where “?“ means that the maximum length of the IE is only constrained by the link layer protocol, and in the case of the facility IE by possible further considerations specified in GSM 04.10. This indic

48、ation is non-normative. c) subclauses specifying conditions for IEs with presence requirement C or O in the relevant message. Together with other conditions specified in GSM 04.80, GSM 04.10 or GSM 04.8x and 04.9x-series this defines when the IE shall be included or not, what non-presence of such IE

49、s means, and (for IEs with presence requirement C) the static conditions for presence and/or non-presence of the IEs (see GSM 04.07). 2.2 Messages for supplementary services control Table 2.1 summarizes the messages for call independent supplementary services control (see GSM 04.10 for a detailed description of call independent supplementary service messages). ETSI ETSI TS 100 950 V7.4.1 (2003-09) 9 3GPP TS 04.80 version 7.4.1 Release 1998 Table 2.1: Messages for call independent supplementary service control Messages for supplementary serv