ETSI TR 123 941-2004 Universal Mobile Telecommunications System (UMTS) 3GPP Generic User Profile (GUP) Stage 2 Data Description Method (DDM)《全球移动通信系统(UMTS) 3GPP一般用户模式(GUP) 第2阶段 数据描_1.pdf

《ETSI TR 123 941-2004 Universal Mobile Telecommunications System (UMTS) 3GPP Generic User Profile (GUP) Stage 2 Data Description Method (DDM)《全球移动通信系统(UMTS) 3GPP一般用户模式(GUP) 第2阶段 数据描_1.pdf》由会员分享，可在线阅读，更多相关《ETSI TR 123 941-2004 Universal Mobile Telecommunications System (UMTS) 3GPP Generic User Profile (GUP) Stage 2 Data Description Method (DDM)《全球移动通信系统(UMTS) 3GPP一般用户模式(GUP) 第2阶段 数据描_1.pdf（35页珍藏版）》请在麦多课文档分享上搜索。

1、 ETSI TR 123 941 V6.0.0 (2004-12)Technical Report Universal Mobile Telecommunications System (UMTS);3GPP Generic User Profile (GUP);Stage 2;Data Description Method (DDM)(3GPP TR 23.941 version 6.0.0 Release 6)ETSI ETSI TR 123 941 V6.0.0 (2004-12) 1 3GPP TR 23.941 version 6.0.0 Release 6 Reference DT

2、R/TSGN-0423941v600 Keywords UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice Individual cop

3、ies of the present document can be downloaded from: http:/www.etsi.org The present document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents between such versions, the reference version is the Portable Document Format

4、(PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current stat

5、us of this and other ETSI documents is available at http:/portal.etsi.org/tb/status/status.asp If you find errors in the present document, please send your comment to one of the following services: http:/portal.etsi.org/chaircor/ETSI_support.asp Copyright Notification No part may be reproduced excep

6、t as authorized by written permission. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2004. All rights reserved. DECTTM, PLUGTESTSTM and UMTSTM are Trade Marks of ETSI registered for the benefit of its Members. TIPHONT

7、Mand the TIPHON logo are Trade Marks currently being registered by ETSI for the benefit of its Members. 3GPPTM is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. ETSI ETSI TR 123 941 V6.0.0 (2004-12) 2 3GPP TR 23.941 version 6.0.0 Release 6 Int

8、ellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Ri

9、ghts (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http:/webapp.etsi.org/IPR/home.asp). Pursuant to the ETSI IPR Policy, no investigation, including

10、IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Technical Report (TR) has been produ

11、ced by ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as being references to the corresponding ETSI deliverables. The cross reference bet

12、ween GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp . ETSI ETSI TR 123 941 V6.0.0 (2004-12) 3 3GPP TR 23.941 version 6.0.0 Release 6 Contents Intellectual Property Rights2 Foreword.2 Foreword.5 Introduction 5 1 Scope 6 2 References 6 3 Definitions and

13、abbreviations.7 3.1 Definitions7 3.2 Abbreviations .8 4 General Description8 5 Structure of Profiles9 5.1 Introduction 9 5.1.1 Profile .9 5.1.2 Profile Instance .10 5.2 Structure of Profile Component and Profile Component Instance .11 5.2.1 Profile Component11 5.2.2 Profile Component Instance11 5.2.

14、2.1 Data Payload .11 5.2.2.2 Attribute 11 5.3 Structure of Profile Description and Profile Component Description11 5.3.1 Profile Description11 5.3.2 Profile Component Description 13 5.4 Structure of Identities .14 5.4.1 Profile Identity14 5.4.2 Profile Component Identity 14 5.5 Structure of User Ide

15、ntities and Run-time binding.15 5.5.1 Relationship between a User and a Profile Instance .15 5.5.2 User Identity part of the Profile Identity.15 5.5.3 Referenced Profile 15 5.5.4 Run-time binding 15 5.6 Details of Profile Structure.16 5.7 Distributed Profile storage16 6 Data Description Method (DDM)

16、 17 6.1 Introduction 17 6.2 3GPP XML Schema Namespace definition .17 6.3 Profile Description .18 6.4 Profile Component Description20 6.5 Description of Versions22 6.6 Properties (Common Definitions) Schema.23 6.6.1 Typical Parameters in Properties (Common Definitions) Schema .23 7 Datatype Definitio

17、n Method (DtDM).23 7.1 Introduction 23 7.2 Datatype Definition guidelines.24 7.2.1 Identification of Datatypes24 7.2.2 Naming Convention24 7.3 XML Schema Usage for Datatype Definitions.25 8 Process for administration of GUP/DDM 25 8.1 Introduction 25 8.2 Responsibility for administration of GUP/DDM

18、Common Objects.25 8.3 Formal Recognition of GUP/DDM Common Objects .25 ETSI ETSI TR 123 941 V6.0.0 (2004-12) 4 3GPP TR 23.941 version 6.0.0 Release 6 8.4 Creation, Modification, Deletion of GUP/DDM Common Objects .26 8.5 Versioning rules .26 8.6 Common Objects storage Syntax .26 8.6.1 Introduction.2

19、6 8.6.2 Profile Component Common Object storage Syntax 27 8.6.3 Data element Common Object storage Syntax .31 Annex A (informative): Change history .33 History 34 ETSI ETSI TR 123 941 V6.0.0 (2004-12) 5 3GPP TR 23.941 version 6.0.0 Release 6 Foreword This Technical Specification has been produced by

20、 the 3rdGeneration Partnership Project (3GPP). The contents of the present document are subject to continuing work within the TSG and may change following formal TSG approval. Should the TSG modify the contents of the present document, it will be re-released by the TSG with an identifying change of

21、release date and an increase in version number as follows: Version x.y.z where: x the first digit: 1 presented to TSG for information; 2 presented to TSG for approval; 3 or greater indicates TSG approved document under change control. y the second digit is incremented for all changes of substance, i

22、.e. technical enhancements, corrections, updates, etc. z the third digit is incremented when editorial only changes have been incorporated in the document. Introduction The present document introduces a Data Description Method (DDM) and Datatype Definition Method (DtDM) to be used for Generic User P

23、rofile (GUP) data. The DDM is a set of common rules on how to specify the data components. These rules meet the requirements specified in 3GPP TS 22.240 10 Stage 1 Generic User Profile. The DDM defines a method for describing 3GPP GUP data in both the 3GPP network and the User Equipment. The Datatyp

24、e Definition Method is a set of rules for defining new datatypes. The DtDM forms part of the Data Description Method. The DtDM can also be applied to datatypes outside of GUP. The built-in datatypes and rules are defined in 5 the W3C XML Schema Part 2: Datatypes specification. The present document f

25、or a DDM and DtDM will capture features that will allow: 1) A method to describe the data and structure in a User Profile in a consistent manner. 2) Efficient usage and/or replication of data. 3) Coexistence with existing data description methods such as OMA UAProf and SyncML Device Management. 4) E

26、ffective support for management and maintenance of data. 5) Extensibility for future needs and the easy addition of new features. ETSI ETSI TR 123 941 V6.0.0 (2004-12) 6 3GPP TR 23.941 version 6.0.0 Release 6 1 Scope The present document is the Stage Two description for the Data Description Method (

27、DDM) and the Datatype Definition Method (DtDM) of the 3GPP Generic User Profile. The present document specifies the method for describing the logical structure of the data description, Generic User Profile, Profile Components, methods for describing Datatypes and other constructs for use in 3GPP. Th

28、e GUP data description method is designed to coexist with other data description technologies. The document includes: DDM and DtDM features and definition; Process and procedures for administration of GUP/DDM and 3GPP TS 24.241 12. 2 References The following documents contain provisions which, throu

29、gh reference in this text, constitute provisions of the present document. References are either specific (identified by date of publication, edition number, version number, etc.) or non-specific. For a specific reference, subsequent revisions do not apply. For a non-specific reference, the latest ve

30、rsion applies. In the case of a reference to a 3GPP document (including a GSM document), a non-specific reference implicitly refers to the latest version of that document in the same Release as the present document. 1 W3C Recommendation: “Extensible Mark-up Language (XML) 1.0 (Second Edition)“. http

31、:/www.w3.org/TR/REC-xml/ 2 W3C Recommendation: “Namespaces in XML“, January 1999. http:/www.w3.org/TR/REC-xml-names/ 3 W3C Recommendation: “XML Schema Part 0: Primer“, May 2001. http:/www.w3.org/TR/xmlschema-0/ 4 W3C Recommendation: “XML Schema Part 1: Structures“, May 2001. http:/www.w3.org/TR/xmls

32、chema-1/ 5 W3C Recommendation: “XML Schema Part 2: Datatypes“, May 2001. http:/www.w3.org/TR/xmlschema-2/ 6 W3C Recommendation: “XML Path Language (XPath) Version 1.0“, 16 November 1999. http:/www.w3.org/TR/xpath 7 W3C Candidate Recommendation: “XML Pointer Language (XPointer) Version 1.0“, 16 Augus

33、t 2002. http:/www.w3.org/TR/xptr/ 8 W3C Recommendation: “XSL Transformations (XSLT) Version 1.0“, 16 November 1999. http:/www.w3.org/TR/xslt 9 3GPP TS 23.078 (V5.5.1): “Customized Applications for Mobile network Enhanced Logic (CAMEL); Stage 2 (Release 5)“. 10 3GPP TS 22.240: “Service requirements f

34、or 3GPP Generic User Profile (GUP); Stage 1“. 11 3GPP TS 23.240: “3GPP Generic User Profile (GUP) requirements; Architecture; Stage 2“. 12 3GPP TS 24.241: “3GPP Generic User Profile (GUP) Common Objects; Stage 3“. ETSI ETSI TR 123 941 V6.0.0 (2004-12) 7 3GPP TR 23.941 version 6.0.0 Release 6 13 3GPP

35、 TS 21.101: “Technical Specifications and Technical Reports for a UTRAN-based 3GPP system“. 14 3GPP TS 29.240: “3GPP Generic User Profile (GUP) Stage 3, Network“. 15 IETF (Internet Engineering Task Force) RFC2396: “Uniform Resource Identifiers (URI): General Syntax“. 3 Definitions and abbreviations

36、3.1 Definitions For the purposes of the present document, the following terms and definitions apply: The terms “GUP“ and “Profile“ are synonymous within the present document. 3GPP Generic User Profile (GUP): collection of user related data which affects the way in which an individual user experience

37、s services and which may be accessed in a standardized manner as described in this specification. The Generic User Profile is defined using the W3C XML recommendation 1. Profile Instance: physical representation of a Profile, and is a collection of Profile Component Instances. For every user there i

38、s exactly one Profile Instance which is regarded as the Master. Additional copies containing the same data are allowed. Profile Component (logical): A Profile Component is logically a part of the Generic User Profile. A Profile Component is instantiated and thus has an associated Profile Component I

39、nstance. Profile Component Instance (physical): physical representation of a Profile Component. To one Profile Component (logical) corresponds one Profile Component Instance which is regarded as the Master and one or more component instance copies, i.e. physical copies. Component instances may be lo

40、cated in the Home Network, in the Value Added Service Provider Environment and/or the User Equipment. Profile Data Element: indivisible unit of Generic User Profile information. GUP Information Model: method describing how to define data structure, the way data elements are defined and the relations

41、hip to each other. The Information Model is describing the concept of Generic User Profile. Data Description Method (DDM): method describing how to define the data contained in the Generic User Profile. The description is defined using the W3 XML Schemas recommendations 5 and 6. Master Instance: amo

42、ng the instances (physical) associated with a Profile or Profile Component (logical), one of them is tagged with the role of “master instance“. The master instance is responsible for the correct value of the corresponding Profile component. Identity: permanent Identifier used to identify one Instanc

43、e of a data entity in 3GPP TR 23.941. An Identity exists at the level of a Profile and a Profile Component. An Identity includes a representation of the User Identity within its structure. User Identity: is the means to uniquely identify a User (such as an IMSI). Datatype Definition Method (DtDM): m

44、ethod describing how to define the new datatypes contained in the Generic User Profile, including an initial set of built-in datatypes. Data Payload: is the useful data in Profile and Profile Components. It consists of a number of Attributes carrying the data values. ETSI ETSI TR 123 941 V6.0.0 (200

45、4-12) 8 3GPP TR 23.941 version 6.0.0 Release 6 3.2 Abbreviations For the purposes of the present document, the following abbreviations apply: DDM Data Description Method DE Data Element DtDM Datatype Definition Method GUP Generic User Profile PC Profile Component 4 General Description As the data co

46、ntained in the 3GPP Generic User Profile is going to be handled by different applications and entities for different purposes, there is a risk that various description methods might lead to duplications and/or inconsistencies. Therefore, a standard description method to describe the data should be u

47、sed in the 3GPP mobile systems specifications, i.e. the Data Description Method (DDM) and Datatype Definition Method (DtDM). Clause 5 defines the concepts used to model the GUP data and their relationships. It also defines characteristics of all Profile Component types and is used in the design and

48、implementation of generic functions for using, maintaining and managing GUP data. Properties specific to a Profile Component type are described using the DDM and DtDM. Clause 6 describes the DDM, which defines how to describe GUP data in a standardized manner. The description of the users services c

49、onfiguration and personalization data using the DDM results in manipulating and accessing these data in a structured and standardized way. The DDM will help to overcome some of the challenges associated with the introduction of sophisticated user terminals and services with widely varying capabilities, hybrid combinations of mobile network domains, the advent of downloadable applications, and the desire of users to customize potentially complex services to individual preferences and needs. The Data Description Method