ETSI GSM 04 85-1996 Digital Cellular Telecommunications System Closed User Group (CUG) Supplementary Services - Stage 3 (GSM 04 85)《参见PRETS 300 569(版本4 1 0)》.pdf

《ETSI GSM 04 85-1996 Digital Cellular Telecommunications System Closed User Group (CUG) Supplementary Services - Stage 3 (GSM 04 85)《参见PRETS 300 569(版本4 1 0)》.pdf》由会员分享，可在线阅读，更多相关《ETSI GSM 04 85-1996 Digital Cellular Telecommunications System Closed User Group (CUG) Supplementary Services - Stage 3 (GSM 04 85)《参见PRETS 300 569(版本4 1 0)》.pdf（13页珍藏版）》请在麦多课文档分享上搜索。

1、STD-ETSI GSM 04*85-ENGL 377b 3400855 0352870 7T4 1 ECHNICAL SPECIFICATION GSM 04.85 December 1996 Version 5.0.0 Source: ETSI TC-SMG Reference: TS/SMG-O30485Q ICs: 33.020 Key words: Digital cellular telecommunications system, Global System for Mobile communications (GSM) GLOBAL SYSTEM FOR MOBILE COMM

2、UNICATIONS Digital cellular telecommunications system; Closed User Group (CUG) supplementary services - Stage 3 (GSM 04.85) ETSI European Telecommunications Standards Institute ETSI Secretariat Postai address: F-O6921 Sophia Antipolis CEDEX - FRANCE Office address: 650 Route des Lucioles - Sophia An

3、tipolis - Valbonne - FRANCE X.400: c=fr, a=atlas, p=etsi, s=secretariat - Internet: secretariatQetsi.fr Tel.: +33 4 92 94 42 O0 - Fax: +33 4 93 65 47 16 Copyright Notification: No part may be reproduced except as authorized by written permission. The copyright and the foregoing restriction extend to

4、 reproduction in all media. Q European Telecommunications Standards Institute 1996. All rights resewed. STD-ETSI GSM 04-85-ENGL 1776 3400855 0152871 b30 Page 2 GSM 04.85 version 5,O.O: December 1996 Whilst every care has been taken in the preparation and publication of this document, errors in conte

5、nt, typographical or otherwise, may occur. If you have comments concerning its accuracy, please write to “ETSI Editing and Committee Support Dept.“ at the address shown on the title page. - STD.ETS1 GSM Oq-B5-ENGL 177b m 3Li00855 U352872 577 m Page 3 GSM 04.85 version 5.0.0: December 1996 Contents F

6、oreword . 5 O Scope 7 0.1 Normative references 7 0.2 Abbreviations . 9 1 Closed User Group (CUG) 9 1.1 Normal operation . 9 Mobile originated CUG calls 9 1.1.1.1 Successful operation . 9 Mobile terminated calls 11 1.1.1 1.1.1.2 Unsuccessful operation . 10 Activation. deactivation. interrogation. reg

7、istration and erasure 11 1.1.2 1.2 Annex A (normative): CUG rejection cause value mapping 12 History 13 STDmETSI GSM 04-85-ENGL L77b m 3400855 0352873 403 m Page 4 GSM 04.85 version 5.0.0: December 1996 Blank page STD-ETSI GSM OLi.85-ENGL L77b m 3Li00855 OL5287Li 3LiT m Page 5 GSM 04.85 version 5.0.

8、0: December 1996 Foreword This Global System for Mobile communications Technical Specification (GTS) has been produced by the Special Mobile Group (SMG) Technical Committee (TC) of the European Telecommunications Standards Institute (ETSI). This GTS specifies the procedures used at the radio interfa

9、ce (reference point Um as defined in GSM 04.02) for normal operation, registration, erasure, activation, deactivation, invocation and interrogation of Closed User Group (CUG) supplementary services within the digital cellular telecommunications system. The contents of this GTS are subject to continu

10、ing work within TC-SMG and may change following formal TC-SMG approval. Should TC-SMG modify the contents of this GTS it will then be republished by ETSI with an identifying change of release date and an increase in version number as follows: Version 5.x.y where: y the third digit is incremented whe

11、n editorial only changes have been incorporated in the specification; x the second digit is incremented for all other types of changes, .e. technical enhancements, corrections, updates, etc. The specification from which this GTS has been derived was originally based on CEPT documentation, hence the

12、presentation of this GTS may not be entirely in accordance with the ETSVPNE rules. STD-ETSI GSM 0i.I-85-ENGL 177b m 3q00855 0352875 28b Page 6 GSM 04.85 version 5.0.0: December 1996 Blank page STD-ETSI GSM Oq-85-ENGL L77b m 3q00855 OL5287b 112 m Page 7 GSM 04.85 version 5.0.0: December 1996 O Scope

13、This Global System for Mobile communications Technical Specification (GTS) specifies the procedures used at the radio interface (reference point Um as defined in GSM 04.02) for normal operation, registration, erasure, activation, deactivation, invocation and interrogation of community of interest su

14、pplementary services. The provision and withdrawal of supplementary services is an administrative matter between the mobile subscriber and the service provider and causes no signalling on the radio interface. In GSM 04.10, the general aspects of the specification of supplementary services at the lay

15、er 3 radio interface are given. GSM 04.80 specifies the formats coding for the supplementary services. Definitions and descriptions of supplementary services are given in GSM 02.04 and GSM 02.8 and GSM 02.9-series. GSM 02.85 is related to the community of interest supplementary services. Technical r

16、ealization of supplementary services is described in technical specifications GSM 03.1 1 and GSM 03.8 and 03.9-series. GSM 03.85 is related to the community of interest supplementary services. The procedures for Call Control, Mobility Management and Radio Resource management at the layer 3 radio int

17、erface are defined in GSM 04.07 and GSM 04.08. Signalling interworking for supplementary services between GSM 09.02 and GSM 04.08 and between GSM 09.02 and GSM 04.80 is defined in GSM 09.1 1. The following supplementary services belong to the community of interest supplementary services and are desc

18、ribed in this GTS: - Closed User Group (CUG) clause 1. 0.1 Normative references This GTS incorporates by dated and undated reference, provisions from other publications. These normative references are cited at the appropriate places in the text and the publications are listed hereafter. For dated re

19、ferences, subsequent amendments to or revisions of any of these publications apply to this GTS only when incorporated in it by amendment or revision. For undated references, the latest edition of the publication referred to applies. 111 131 141 151 181 GSM O1 .O4 (ETR 350): “Digital cellular telecom

20、munications system (Phase 2+); Abbreviations and acronyms“. GSM 02.04 (ETS 300 91 8): “Digital cellular telecommunications system (Phase 2+); General on supplementary services“. GSM 02.81 : “Digital cellular telecommunications system; Line identification Supplementary Services - Stage 1“. GSM 02.82:

21、 “Digital cellular telecommunications system; Call Forwarding (CF) Supplementary Services - Stage 1 I. GSM 02.83: “Digital cellular telecommunications system; Call Waiting (CW) and Call Hold (HOLD) Supplementary Services - Stage 1“. GSM 02.84: “Digital cellular telecommunications system; MultiParty

22、(MPTY) Supplementary Services - Stage 1 I. GSM 02.85: “Digital cellular telecommunications system; Closed User Group (CUG) Supplementary Services - Stage 1“. GSM 02.86: “Digital cellular telecommunications system; Advice of Charge (AOC) Supplementary Services - Stage 1 II. STDnETSI GSM 09-85-ENGL L7

23、7b 3Li00855 0352877 057 m Page 8 GSM 04.85 version 5.0.0: December 1996 i91 GSM 02.87: “Digital cellular telecommunications system. (Phase 2+); User-to-User Signalling (UUS) Service description - Stage 1“. GSM 02.88: “Digital cellular telecommunications system; Call Barring (CB) Supplementary Servic

24、es - Stage 1 I. GSM 02.90: “Digital cellular telecommunications system; Unstructured Supplementary Service Data (USSD) - Stage 1“. GSM 03.02: “Digital cellular telecommunications system (Phase 2+); Network architect u re“. i 31 GSM 03.1 1 (ETS 300 928): “Digital cellular telecommunications system; T

25、echnical realization of supplementary services“. 11 41 GSM 03.81 : “Digital cellular telecommunications system; Line identification supplementary services - Stage 2“. i 51 GSM 03.82: “Digital cellular telecommunications system; Call Forwarding (CF) supplementary services - Stage 2“. GSM 03.83: “Digi

26、tal cellular telecommunications system; Call Waiting (CW) and Call Hold (HOLD) supplementary services - Stage 2“. i 71 GSM 03.84: “Digital cellular telecommunications system; Multi Party (MPTY) supplementary services - Stage 2“. GSM 03.85: “Digital cellular telecommunications system; Closed User Gro

27、up (CUG) supplementary services - Stage 2“. i 91 GSM 03.86 (ETS 300 935): “Digital cellular telecommunications system; Advice of Charge (AOC) supplementary services - Stage 2“. GSM 03.88: “Digital cellular telecommunications system; Call Barring (CB) supplementary services - Stage 2“. GSM 03.90: “Di

28、gital cellular telecommunications system; Unstructured Supplementary Service Data (USSD) - Stage 2“. GSM 04.02: “Digital cellular telecommunications system (Phase 2+); GSM Public Land Mobile Network (PLMN) access reference configuration“. GSM 04.07 (ETS 300 939): “Digital cellular telecommunications

29、 system (Phase 2+); Mobile radio interface signalling layer 3; General aspects“. 1241 GSM 04.08 (ETC 300 940): “Digital cellular telecommunications system (Phase 2+); Mobile radio interface layer 3 specification“. GSM 04.1 O (ETS 300 941): “Digital cellular telecommunications system; Mobile radio in

30、terface layer 3; Supplementary services specification; General aspects“. GSM 04.80 (ETS 300 950): “Digital cellular telecommunications system (Phase 2+); Mobile radio interface layer 3 supplementary. services specification; Formats and coding“. GSM 09.02 (ETS 300 974): “Digital cellular telecommunic

31、ations system (Phase 2+); Mobile Application Part (MAP) specification“. GSM 09.1 1 : “Digital cellular telecommunications system (Phase 2+); Signalling interworking for supplementary services“. STD-ETSI GSM IIi-BCi-ENGL 177b 3400855 0152878 T75 = Page 9 GSM 04.85 version 5.0.0: December 1996 0.2 Abb

32、reviations Abbreviations used in this GTS are listed in GSM 01.04. 1 Closed User Group (CUG) 1.1 Normal operation 1.1.1 Mobile originated CUG calls 1.1.1.1 Successful operation CUG calls may be invoked Implicitly or Explicitly by the calling user. In the case of Implicit invocation, no CUG informati

33、on is provided by the user in the call Set-up request and a default attribute of CUG is invoked. Normal call establishment procedures are followed over the radio interface and no CUG signalling is required. In the case of Explicit CUG invocation, CUG information is provided by the user and is includ

34、ed in the SETUP message using the ForwardCUG-Info operation (see figure 1.1 ). User provided CUG information may consist of any combination of the following parameters: - CUGIndex; - Suppress Preferential CUG indicator; - Suppress OA indicator. NOTE: No more than one of each parameter may be include

35、d per call attempt. MS Network SETUP Facility (Invoke = ForwardCUG-Info (CUG-Index, SuppressPrefCUG, SuppressOA) Figure 1.1 : Transfer of CUG information during CUG call Set-up If the network received a non-zero SS Screening indicator from the calling users mobile station, the network may optionally

36、 indicate to the MS that a CUG has been invoked for a call (see figure 1.2). When a CUG Index is received from the VLR the MSC shall send it immediately to the MS in a FACILITY or CALL PROCEEDING message. If the network did not receive a non-zero SS Screening indicator from the calling users mobile

37、station, it shall not send this notification. MS Network FACILITY/CALL PROCEEDING Facility (Invoke = NotifySS (CUG-Index) Figure 1.2: Indication of CUG invocation to the calling subscriber by the network - STD-ETSI GSM 04.85-ENGL L77b 3LiOO855 0352877 921 Page 10 GSY 04,85 version 5.0.0: December 19

38、96 1.1.1.2 Unsuccessful operation When an attempted CUG call is rejected for CUG related reasons, the mobile station is provided with an indication of the reason for failure. The indication is passed to the calling MS in the first clearing message. The indication may be given in one of two ways: - D

39、iagnostics information in cause value #29 “Facility Rejected“; - A standard call control cause value. Diagnostics are used when the rejection is generated locally (the serving VLR has rejected the call), or if they are provided in a cause value from a remote network node (see figure 1.3). Table 1.1

40、gives the diagnostics information for each potential local rejection case. A CUG rejection from a remote network node is generally indicated using a standard (CUG related) call control cause value contained in an ISUP clearing message. These cause values are passed to the mobile station in the appro

41、priate radio interface clearing message (see figure 1.4). Table 1.2 gives the cause values in each potential remote rejection case. All CUG related call rejection cases are defined in GSM 03.85. Cause values are defined in GSM 04.08 and diagnostics in GSM 04.80. NOTE: Annex A specifies the mapping o

42、f cause values between MAP, ISUP and GSM 04.08 for remotely generated CUG rejections. MS Network DISCONNECT/RELEASE/RELEASE COMPLETE . Cause #29 (Facility Rejected (diagnostics) . - Figure 1.3: Indication of local CUG call rejection MS Network DISCONNECT/RELEASE/RELEASE COMPLETE Cause Information El

43、ement (Cause Value) Figure 1.4: Indication of remote CUG call rejection - STD-ETSI GSM 04-85-ENGL 177b 3Li00855 0152880 b43 Page 11 GSM 04.85 version 5.0.0: December 1996 Outgoing calls barred within the CUG Inconsistent access info - No CUG Table 1.1 : Use of diagnostic walues for local CUG call fa

44、ilure indications (Diagnostics) Outgoing calls barred within the CUG No CUG Selected Reason for rejection I Facility Rejected #29 I See GSM 03.85 Diagnostic Field I Selected Unknown CUG Index Inconsistent access info - Index incompatible with requested basic service Unknown CUG Index Index incompati

45、ble with requested basic service Reason for rejection Called party supplementary service interaction violation Cause Information Element Facility Rejected #29 Diagnostic = CUG call failure, unspecified Diagnostic = CUG call failure, unspecified Incoming calls barred within the CUG #55 User not a mem

46、ber of CUG #87 Facility Rejected #29 See GSM 03.85 (cause value) Incompatible Destination Facility Rejected #29 (see note) Incoming calls barred within the CUG Interlock mismatch Requested basic service violates CUG constraints NOTE: In cases of interworking failures ETSI ISUP V2 clears the call wit

47、h cause value #29 “Facility Rejected“, Diagnostic = “Interlock Code“. This is mapped to Facility Rejected with general diagnostic value “CUG call failure, Unspecified“ since the interlock code has no meaning for a mobile user. Table 1.2: Use of cause values for remote CUG call failure indications 1.

48、1.2 Mobile terminated calls If the network received a non-zero SS Screening indicator from the called users mobile station, when a CUG call is terminated by a CUG subscriber the Index associated with the invoked CUG may be passed to the mobile station (see figure 1.5). If the network did not receive a non-zero SS Screening indicator from the called users mobile station, it shall not send this notification. 1.2 Activation, deactivation, interrogation, registration and erasure Activati