ETSI EN 301 062-3-2000 Integrated Services Digital Network (ISDN) Signalling System No 7 Support of Virtual Private Network (VPN) Applications with Private Network Q Reference Poin_1.pdf

《ETSI EN 301 062-3-2000 Integrated Services Digital Network (ISDN) Signalling System No 7 Support of Virtual Private Network (VPN) Applications with Private Network Q Reference Poin_1.pdf》由会员分享，可在线阅读，更多相关《ETSI EN 301 062-3-2000 Integrated Services Digital Network (ISDN) Signalling System No 7 Support of Virtual Private Network (VPN) Applications with Private Network Q Reference Poin_1.pdf（21页珍藏版）》请在麦多课文档分享上搜索。

1、ETSI EN 301 062-3 1.1.1 (2000-08) European Standard (Telecommunications series) Integrated Services Digital Network (ISDN); Signalling System N0.7; Support of Virtual Private Network (VPN) applications with Private network Q reference point Signalling System number 1 (PSSI) information flows; Part 3

2、: Test Suite Structure and Test Purposes (TSS Essential, or potentially Essential, IPRs notifed to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (-). Pursuant to the ETSI IPR Policy, no investigation, including I

3、PR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR O00 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This European Standard (Telecommunications

4、 series) has been produced by ETSI Technical Committee Services and Protocols for Advanced Networks (SPAN). The present document is part 3 of a multi-part EN covering the Integrated Services Digital Network (ISDN); Signalling System No.7; Support of Virtual Private Network (VPN) applications with Pr

5、ivate network Q reference point Signalling System number 1 (PSS1) information flows, as identified below: Part 1: Part 2: Part 3: Part 4: “Protocol specification ITU-T Recommendations Q.765.1 and Q.699.1, modified“; “Protocol Implementation Conformance Statement (PICS) proforma specification“; “Test

6、 Suite Structure and Test Purposes (TSS “Abstract Test Suite (ATS) and partial Protocol Implementation extra Information for Testing (PIXIT) specification“. National transposition dates Date of adoption of this EN: Date of latest announcement of this EN (doa): Date of latest publication of new Natio

7、nal Standard or endorsement of this EN (dop/e): Date of withdrawal of any conflicting National Standard (dow): 23June2000 30 September 2000 31 March 2001 31 March 2001 ETSI 5 ETSI EN 301 062-3 V1.l.l (2000-08) 1 Scope The present document contains the validation (conformance) test specification for

8、the application transport mechanism, support of VPN applications with PSS 1 information flows defined in ITU-T Recommendation Q.765.1 181. The present document applies only to exchanges having implemented the ISUP v3 protocol specification for the Application Transport Mechanism and APM support of V

9、PN applications for the exchange. It is applicable for validation testing of all types of exchanges as defined in the ISUP v3 protocol specification. The present document does not deal with compatibility testing. EN 301 062-2 11 presents the Protocol Implementation Conformance Statements (PICS) and

10、the document EN 30 1 062-4 2 presents the Protocol Implementation extra Information for Testing (PMIT), Protocol Conformance Test Report (PCTR) and the ATS for the application transport mechanism, support of VPN applications with PSS 1 information flows. The supplier of an implementation that is cla

11、imed to conform to the reference specification for the Signalling System Number 7, Application Transport Mechanism, support of VPN applications with PSS 1 information flows ITU-T Recommendation Q.765.1 18 is required to complete a copy of the PICS proforma provided in annex A document EN 301 062-2 i

12、. 2 References The following documents contain provisions which, through reference in this text, constitute provisions of the present document. References are either specific (identified by date of publication, edition number, version number, etc.) or non-specific. For a specific reference, subseque

13、nt revisions do not apply. For a non-specific reference, the latest version applies. A non-specific reference to an ETS shall also be taken to refer to later versions published as an EN with the same number. il ETSI EN 30 1 062-2: “Integrated Services Digital Network (ISDN); Signalling System No.7;

14、Support of Virtual Private Network (VPN) applications with Private network Q reference point Signalling System number 1 (PSS 1) information flows; Part 2: Protocol Implementation Conformance Statement (PICS) proforma specification“. ETSI EN 30 1 062-4: “Integrated Services Digital Network (ISDN); Si

15、gnalling System No.7; Support of Virtual Private Network (VPN) applications with Private network Q reference point Signalling System number 1 (PSS1) information flows; Part 4: Abstract Test Suite (ATS) and partial Protocol Implementation extra Information for Testing (PIXIT) proforma specification“.

16、 ISO/IEC 9646- 1 (1994): “Information technology; Open Systems Interconnection; Conformance testing methodology and framework; Part 1: General concepts“. ISO/IEC 9646-3 (1998): “Information technology; Open Systems Interconnection; Conformance testing methodology and framework; Part 3: The Tree and

17、Tabular Combined Notation (TTCN)“. ISO/IEC 9646-7 (1995): “Information technology; Open Systems Interconnection; Conformance testing methodology and framework; Part 7: Implementation Conformance Statements“. ITU-T Recommendation E. 164 (1997): “The international public telecommunication numbering Pl

18、 31 41 51 61 plan“. 71 ITU-T Recommendation Q.701 (1993): “Functional description of the message transfer part (MTP) of Signalling System No. 7“. ITU-T Recommendation Q.702 (1988): “Signalling data link“. SI ETSI 6 ETSI EN 301 062-3 V1.l.l (2000-08) ITU-T Recommendation Q.703 (1996): “Signalling lin

19、k“ ITU-T Recommendation Q.704 (1996): “Signalling network functions and messages“. ITU-T Recommendation Q.705 (1993): “Signalling network structure“. ITU-T Recommendation Q.706 (1993): “Message transfer part signalling performance“. ITU-T Recommendation Q.707 (1988): “Testing and maintenance“. ITU-T

20、 Recommendation Q.762 (1997): “Signalling System No. 7; ISDN user part general functions of messages and signals“. ITU-T Recommendation Q.763 (1997): “Signalling System No. 7; ISDN user part formats and codes“. ITU-T Recommendation Q.764 (1997): “Signalling System No. 7; ISDN user part signalling pr

21、ocedures“. ITU-T Recommendation Q.765: “Signalling System No. 7; Application Transport Mechanism“. ITU-T Recommendation Q.765.1: “Signalling System No. 7; Application Transport Mechanism, support of VPN applications with PSS 1 information flows“. 3 3.1 Definitions and abbreviations Definitions For t

22、he purposes of the present document, the following terms and definitions apply: terms defined in ISDN User Part (ISUP) reference specification ITU-T Recommendations Q.765.1 181, Q.765 171, Q.763 151 and Q.764 161; terms defined in ISO/IEC 9646-1 3, ISO/IEC 9646-3 4 and in ISO/IEC 9646-7 5. In partic

23、ular, the following terms apply: Abstract Test Case (ATC): complete and independent specification of the actions required to achieve a specific test purpose, defined at the level of abstraction of a particular Abstract Test Method, starting in a stable testing state and ending in a stable testing st

24、ate (see ISO/IEC 9646-1 3, subclause 3.3.3) Abstract Test Method (ATM): description of how an IUT is to be tested, given at an appropriate level of abstraction to make the description independent of any particular realization of a Means of Testing, but with enough detail to enable abstract test case

25、s to be specified for this method (see ISO/IEC 9646-1 3, subclause 3.3.5) Abstract Test Suite (ATS): test suite composed of abstract test cases (see ISO/IEC 9646-1 3, subclause 3.3.6) Implementation Under Test (IUT): implementation of one or more OS1 protocols in an adjacent user/provider relationsh

26、ip, being part of a real open system which is to be studied by testing (see ISO/IEC 9646-1 3, subclause 3.3.43) ISDN number: number conforming to the numbering and structure specified in ITU-T Recommendation E.164 6 Means of Testing (MOT): combination of equipment and procedures that can perform the

27、 derivation, selection, parameterization and execution of test cases, in conformance with a reference standardized ATS, and can produce a conformance log (see ISO/IEC 9646-1 3, subclause 3.3.54) PICS proforma: document in the form of a questionnaire, which when completed for an implementation or sys

28、tem becomes the PICS PIXIT proforma: document in the form of a questionnaire, which when completed for the IUT becomes the PIXIT ETSI 7 ETSI EN 301 062-3 V1.l.l (2000-08) Point of Control and Observation (PCO): point within a testing environment where the occurrence of test events is to be controlle

29、d and observed, as defined in an Abstract Test Method (see ISO/IEC 9646-1 3, subclause 3.3.64) Pre-test condition: setting or state in the IUT which cannot be achieved by providing stimulus from the test environment Protocol Implementation Conformance Statement (PICS): statement made by the supplier

30、 of a protocol claimed to conform to a given specification, stating which capabilities have been implemented (see ISO/IEC 9646-1 3, subclause 3.3.39 and subclause 3.3.80) Protocol Implementation extra Information for Testing (PIXIT): statement made by a supplier or implementor of an IUT (protocol) w

31、hich contains or references all of the information related to the IUT and its testing environment, which will enable the test laboratory to run an appropriate test suite against the IUT (see ISO/IEC 9646-1 3, subclause 3.3.41 and subclause 3.3.81) System Under Test (SUT): real open system in which t

32、he IUT resides (see ISO/IEC 9646-1 3, subclause 3.3.103) 3.2 Abbreviations For the purposes of the present document, the following abbreviations apply: ACM ANM APM ASE AT11 ATM ATS CNlD CON CPG CPN DLE GPINX IAM ISDN ISUP IUT LAB LAC LT MNT MOT MTP NNI OLE PAN PCO PICS PIN PINX PIXIT PSS 1 SP SUT TC

33、P TP TPINX TSS TTCN UT VPN Address Complete Message ANswer Message Application transport Mechansim protocol control Application Service Entity Application Transport Instruction Indicators Abstract Test Method Abstract Test Suite Corporate Telecommunications Network Identifier CONnect Call Progress m

34、essaGe Calling Party Number Destination Local Exchange Gateway PINX Initial Address Message Integrated Services Digital Network ISDN User Part Implementation Under Test PCO for signalling link PCO for signalling link Lower Tester Maintenance PCO Means Of Testing Message Transfer Part Network-Network

35、 Interface Originating Local Exchange Public Addressed Node Point of Control and Observation Protocol Implementation Conformance Statement Public Initiating Node Private Integrated Services Network Exchange Protocol Implementation extra Information for Testing Private network Q reference point Signa

36、lling System number I Signalling Point System Under Test Test Coordination Procedures Test Purpose (context dependent) Transit PINX Test Suite Structure Tree and Tabular Combined Notation Upper Tester Virtual Private Network ETSI 8 ETSI EN 301 062-3 V1.l.l (2000-08) The ISUP message acronyms can be

37、found in table 2 of ITU-T Recommendation Q.762 14. The APM primitives acronyms can be found in the different tables of ITU-T Recommendation Q.765 171. The VPN primitives acronyms can be found in the different tables of ITU-T Recommendation Q.765.1 18. 3.2.1 ISUP abbreviations The following abbreviat

38、ions apply for ISUP parameters and parameter values. Ads g CdPN CgPN GenNb GenNot IUT LAB LT MNT PAN PCO PIN TCP TMR TPINX us1 UT UT Address Signals called party number Calling Party Number generic number parameter Generic Notification Implementation Under Test PCO for signalling link Lower Tester M

39、aintenance PCO Public Addressed Node Point of Control and Observation Public Initiating Node Test Coordination Procedures Transmission Medium Requirement Transit PIN User Service Indicator Upper Tester Upper Tester 4 Implementation under test and test methods 4.1 Identification of the system and imp

40、lementation under test The System Under Test (SUT) is an exchange. The Implementation Under Test (IUT) is the ISUP v3 implementation in this exchange, mainly the part responsible for the Application Transport Mechanism, support of VPN applications with PSS1 information flows, as shown in figure 1. T

41、he protocol functions for the Application Transport Mechanism, support of VPN applications with PSS 1 information flows relates to the signalling associations with a bearer (ISUP). Therefore the defined ISUP Basic Call and its associated formats and codes are required to support the Application Tran

42、sport Mechanism for VPN applications. The following main subjects have to be considered in this area: a) APM-user Protocol Control (APM-user Application Service Element); b) Application Transport Mechanism protocol control (APM Application Service Element); c) ISUP Basic Call (ISUP Application Servi

43、ce Element. ETSI 9 ETSI EN 301 062-3 V1.l.l (2000-08) 4 QSIG/PSSI ISUP Exchange ISUP Basic Call ISUP v3 If I UT APM - Application Transport Mechansim Protocol Control ISUP - ISDN User Part IUT - Implementation Under Test SUT - System Under Test d ISUP Figure 1 : The System Under Test The ISUP signal

44、ling protocol can be observed on the SS No.7 link on the Network-Network Interface (“1). 4.2 ATM and testing configuration for ISUP v3 - APM support of VPN The Abstract Test Method (ATM) chosen for the Application Transport Mechanism, support of VPN applications with PSS 1 information flows specific

45、ation is the distributed multi-party test method. The ATM is defined at an appropriate level of abstraction so that the test cases may be specified appropriately, without adding restrictions to the implementation under test. The testing architectures are described in the following subclauses. The AT

46、S is written in concurrent TTCN. Local exchanges As mentioned above, the IUT can be tested within different configurations. The following text describes the test configuration for the IUT where the software for IUSP v3 and also the VPN part reside in a local exchange. Figure 2 shows the logical test

47、 components of the adopted test configuration. The main test component is located on the right side of the IUT, it contains the ISUP part. On the left side there is a parallel test component which covers the VPN part. To observe and control the message flow on the ISUP and VPN side for each side a P

48、oint of Control and Observation (PCO) is needed. The PCO for the ISUP link is abbreviated with an L followed by two letters indicating the interface. The PCO for the PSS 1 interface is abbreviated with an A followed by two letters indicating the interface. The LAB PCO is used by the Lower Tester (LT

49、) to control and observe the ISUP on the signalling to the exchange. The ACH PCO is used by the Upper Tester (UT) to control and observe the PSS 1 signalling to the PIN. The MNT PCO is used by the Upper Tester (UT) to control and observe the maintenance functions of the exchange. ETSI 10 This configuration to test the local exchanges is presented in figure 2. Access service provider Maintenance Network service provider 4.4 TCP - LT IUT TPINX - TCP LT UT Maintenance - I ISUF link ETSI EN 301 062-3 V1.l.l (2000-08) ISUF link SP c M