EN ISO 52022-3-2017 en Energy performance of buildings - Thermal solar and daylight properties of building components and elements - Part 3 Detailed calculation method of the solar.pdf

《EN ISO 52022-3-2017 en Energy performance of buildings - Thermal solar and daylight properties of building components and elements - Part 3 Detailed calculation method of the solar.pdf》由会员分享，可在线阅读，更多相关《EN ISO 52022-3-2017 en Energy performance of buildings - Thermal solar and daylight properties of building components and elements - Part 3 Detailed calculation method of the solar.pdf（44页珍藏版）》请在麦多课文档分享上搜索。

1、Energy performance of buildings Thermal, solar and daylight properties of building components and elementsPart 3: Detailed calculation method of the solar and daylight characteristics for solar protection devices combined with glazingBS EN ISO 520223:2017BSI Standards PublicationWB11885_BSI_Standard

2、Covs_2013_AW.indd 1 15/05/2013 15:06EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 52022-3 July 2017 ICS 91.120.10 Supersedes EN 13363-2:2005English Version Energy performance of buildings - Thermal, solar and daylight properties of building components and elements -Part 3: Detailed calcul

3、ation method of the solar and daylight characteristics for solar protection devices combined with glazing (ISO 52022-3:2017) Performance nergtique des btiments - Proprits thermiques, solaires et lumineuses des composants et lments du btiment - Partie 3: Mthode de calcul dtaille des caractristiques s

4、olaires et en lumire du jour pour les dispositifs de protection solaire combins des vitrages (ISO 52022-3:2017) Energieeffizienz von Gebuden - Wrmetechnische, solare und tageslichttechnische Eigenschaften von Bauteilen und Bauelementen - Teil 3: Detailliertes Berechnungsverfahren zur Ermittlung der

5、solaren und lichttechnischen Eigenschaften von Sonnenschutz in Kombination mit Verglasungen (ISO 52022-3:2017) This European Standard was approved by CEN on 27 February 2017. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this Euro

6、pean Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official version

7、s (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Be

8、lgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Swed

9、en, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CEN All rights of exploitation in any form and by any means reserved worldwide for CE

10、N national Members. Ref. No. EN ISO 52022-3:2017 ENational forewordThis British Standard is the UK implementation of EN ISO 520223:2017. It supersedes BS EN 133632:2005, which is withdrawn.The UK participation in its preparation was entrusted to Technical Committee B/540/2, Building performance Mois

11、ture.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2017 Published by BSI S

12、tandards Limited 2017ISBN 978 0 580 87980 7ICS 91.120.10Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 August 2017.Amendments/corrigenda issued since publica

13、tionDate Text affectedBRITISH STANDARDBS EN ISO 520223:2017EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 52022-3 July 2017 ICS 91.120.10 Supersedes EN 13363-2:2005English Version Energy performance of buildings - Thermal, solar and daylight properties of building components and elements -

14、Part 3: Detailed calculation method of the solar and daylight characteristics for solar protection devices combined with glazing (ISO 52022-3:2017) Performance nergtique des btiments - Proprits thermiques, solaires et lumineuses des composants et lments du btiment - Partie 3: Mthode de calcul dtaill

15、e des caractristiques solaires et en lumire du jour pour les dispositifs de protection solaire combins des vitrages (ISO 52022-3:2017) Energieeffizienz von Gebuden - Wrmetechnische, solare und tageslichttechnische Eigenschaften von Bauteilen und Bauelementen - Teil 3: Detailliertes Berechnungsverfah

16、ren zur Ermittlung der solaren und lichttechnischen Eigenschaften von Sonnenschutz in Kombination mit Verglasungen (ISO 52022-3:2017) This European Standard was approved by CEN on 27 February 2017. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditio

17、ns for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in

18、 three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standard

19、s bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia

20、, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CEN All rights of exploitation in any form and by any means re

21、served worldwide for CEN national Members. Ref. No. EN ISO 52022-3:2017 EBS EN ISO 520223:2017EN ISO 52022-3:2017 (E) 2 European foreword This document (EN ISO 52022-3:2017) has been prepared by Technical Committee CEN/TC 89 “Thermal performance of buildings and building components” the secretariat

22、of which is held by SIS, in collaboration with Technical Committee ISO/TC 163 “Thermal performance and energy use in the built environment“. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by January

23、 2018, and conflicting national standards shall be withdrawn at the latest by January 2018. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN shall not be held responsible for identifying any or all such patent rights. This docu

24、ment has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association. This document is part of the set of standards on the energy performance of buildings (the set of EPB standards) and has been prepared under a mandate given to CEN by the European C

25、ommission and the European Free Trade Association (Mandate M/480, see reference EF1 below), and supports essential requirements of EU Directive 2010/31/EC on the energy performance of buildings (EPBD, EF2). In case this standard is used in the context of national or regional legal requirements, mand

26、atory choices may be given at national or regional level for such specific applications, in particular for the application within the context of EU Directives transposed into national legal requirements. Further target groups are users of the voluntary common European Union certification scheme for

27、the energy performance of non-residential buildings (EPBD art.11.9) and any other regional (e.g. Pan European) parties wanting to motivate their assumptions by classifying the building energy performance for a dedicated building stock. References: EF1 Mandate M480, Mandate to CEN, CENELEC and ETSI f

28、or the elaboration and adoption of standards for a methodology calculating the integrated energy performance of buildings and promoting the energy efficiency of buildings, in accordance with the terms set in the recast of the Directive on the energy performance of buildings (2010/31/EU) of 14th Dece

29、mber 2010 EF2 EPBD, Recast of the Directive on the energy performance of buildings (2010/31/EU) of 14thDecember 2010 This document supersedes EN 13363-2:2005. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement thi

30、s European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia,

31、 Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Endorsement notice The text of ISO 52022-3:2017 has been approved by CEN as EN ISO 52022-3:2017 without any modification. ISO 52022-3:2017(E)Foreword ivIntroduction v1 Scope . 12 Normative references 13 Terms and definit

32、ions . 24 Symbols and subscripts . 34.1 Symbols . 34.2 Subscripts 35 Description of the method 45.1 Output of the method 45.2 General description . 46 Calculation method 46.1 Output data 46.2 Calculation time intervals 56.3 Input data 56.3.1 Solid layers 56.3.2 Gas spaces 66.4 Calculation procedure

33、. 66.4.1 General 66.4.2 Applicable time interval 76.4.3 Solar radiation and light 76.4.4 Heat transfer 96.4.5 Energy balance .146.4.6 Boundary Conditions 147 Report .157.1 Contents of report . 157.2 Drawing 167.3 Values used in the calculation . 167.4 Presentation of results (see Table 4) 16Annex A

34、(normative) Input and method selection data sheet Template 18Annex B (informative) Input and method selection data sheet Default choices 20Annex C (normative) Regional references in line with ISO Global Relevance Policy 22Annex D (normative) Determination of equivalent solar and light optical charac

35、teristics for louvres or venetian blinds .23Annex E (normative) Stack effect 27Annex F (normative) Physical properties of gases 30Bibliography .31 ISO 2017 All rights reserved iiiContents PageBS EN ISO 520223:2017ISO 52022-3:2017(E)Foreword ivIntroduction v1 Scope . 12 Normative references 13 Terms

36、and definitions . 24 Symbols and subscripts . 34.1 Symbols . 34.2 Subscripts 35 Description of the method 45.1 Output of the method 45.2 General description . 46 Calculation method 46.1 Output data 46.2 Calculation time intervals 56.3 Input data 56.3.1 Solid layers 56.3.2 Gas spaces 66.4 Calculation

37、 procedure . 66.4.1 General 66.4.2 Applicable time interval 76.4.3 Solar radiation and light 76.4.4 Heat transfer 96.4.5 Energy balance .146.4.6 Boundary Conditions 147 Report .157.1 Contents of report . 157.2 Drawing 167.3 Values used in the calculation . 167.4 Presentation of results (see Table 4)

38、 16Annex A (normative) Input and method selection data sheet Template 18Annex B (informative) Input and method selection data sheet Default choices 20Annex C (normative) Regional references in line with ISO Global Relevance Policy 22Annex D (normative) Determination of equivalent solar and light opt

39、ical characteristics for louvres or venetian blinds .23Annex E (normative) Stack effect 27Annex F (normative) Physical properties of gases 30Bibliography .31 ISO 2017 All rights reserved iiiContents PageBS EN ISO 520223:2017ISO 52022-3:2017(E)ForewordISO (the International Organization for Standardi

40、zation) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to b

41、e represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.The procedures used t

42、o develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of t

43、he ISO/IEC Directives, Part 2 (see www .iso .org/ directives).Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified

44、 during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www .iso .org/ patents).Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.For an explanation on

45、the voluntary nature of standards, the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISOs adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following URL: www .iso .org/ iso/ fore

46、word .html.ISO 52022-3 was prepared by the European Committee for Standardization (CEN) Technical Committee CEN/TC 89, Thermal performance of buildings and building components, in collaboration with ISO Technical Committee ISO/TC 163, Thermal performance and energy use in the built environment, Subc

47、ommittee SC 2, Calculation methods, in accordance with the agreement on technical cooperation between ISO and CEN (Vienna Agreement).A list of parts in the ISO 52022 series can be found on the ISO website.iv ISO 2017 All rights reservedBS EN ISO 520223:2017ISO 52022-3:2017(E)ForewordISO (the Interna

48、tional Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has be

49、en established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed