EN ISO 12543-6-2011 en Glass in building - Laminated glass and laminated safety glass - Part 6 Appearance (Incorporating corrigendum May 2012)《建筑物内玻璃 夹层玻璃和夹层安全玻璃 外观》.pdf

《EN ISO 12543-6-2011 en Glass in building - Laminated glass and laminated safety glass - Part 6 Appearance (Incorporating corrigendum May 2012)《建筑物内玻璃 夹层玻璃和夹层安全玻璃 外观》.pdf》由会员分享，可在线阅读，更多相关《EN ISO 12543-6-2011 en Glass in building - Laminated glass and laminated safety glass - Part 6 Appearance (Incorporating corrigendum May 2012)《建筑物内玻璃 夹层玻璃和夹层安全玻璃 外观》.pdf（14页珍藏版）》请在麦多课文档分享上搜索。

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN ISO 12543-6:2011Glass in building Laminated glass and laminated safety glassPart 6: AppearanceIncorporating Corrigendum May 2012BS EN ISO 12543-6:2011National forewordThis

2、British Standard is the UK implementation of EN ISO 12543-6:2011, incorporating corrigendum May 2012. It supersedes BS EN ISO 12543-6:1998, which is withdrawn.The start and finish of text introduced or altered by corrigendum is indicated in the text by tags. Text altered by ISO corrigendum May 2012

3、is indicated in the text by .The UK participation in its preparation was entrusted by Technical Committee B/520, Glass and glazing in building, to Subcommittee B/520/3, A list of organizations represented on this subcommittee can be obtained on request to its secretary.This publication does not purp

4、ort to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2013. Published by BSI Standards Limited 2013.ISBN 978 0 580 79307 3 ICS 81.040.20 Compliance with a British Standard cannot confer immunity from legal obli

5、gations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 August 2011.Amendments/corrigenda issued since publicationDate Text affectedImplementation of ISO corrigendum May 2012BRITISH STANDARDSecurity glazing.28 February 2013EUROPEAN STANDAR

6、D NORME EUROPENNE EUROPISCHE NORM EN ISO 12543-6 August 2011 ICS 81.040.20 Supersedes EN ISO 12543-6:1998English Version Glass in building - Laminated glass and laminated safety glass -Part 6: Appearance (ISO 12543-6:2011) Verre dans la construction - Verre feuillet et verre feuillet de scurit - Par

7、tie 6: Aspect (ISO 12543-6:2011) Glas im Bauwesen - Verbundglas und Verbund-Sicherheitsglas - Teil 6: Aussehen (ISO 12543-6:2011) This European Standard was approved by CEN on 6 August 2011. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for

8、giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three

9、official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodie

10、s of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United King

11、dom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2011 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 12543-6:2011: E

12、Incorporating corrigendum May 20123 Foreword This document (EN ISO 12543-6:2011) has been prepared by Technical Committee ISO/TC 160 “Glass in building“ in collaboration with Technical Committee CEN/TC 129 “Glass in building” the secretariat of which is held by NBN. This European Standard shall be g

13、iven the status of a national standard, either by publication of an identical text or by endorsement, at the latest by February 2012, and conflicting national standards shall be withdrawn at the latest by February 2012. Attention is drawn to the possibility that some of the elements of this document

14、 may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN ISO 12543-6:1998. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are b

15、ound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain

16、, Sweden, Switzerland and the United Kingdom. Endorsement notice The text of ISO 12543-6:2011 has been approved by CEN as a EN ISO 12543-6:2011 without any modification. BS EN ISO 12543-6:2011 EN ISO 12543-6:2011 (E) ISO 201 iiiForeword ISO (the International Organization for Standardization) is a w

17、orldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented

18、on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafte

19、d in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Stand

20、ard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. ISO 12543-6 was prepared

21、by Technical Committee ISO/TC 160, Glass in building, Subcommittee SC 1, Product considerations. This second edition cancels and replaces the first edition (ISO 12543-6:1998), which has been technically revised. ISO 12543 consists of the following parts, under the general title Glass in building Lam

22、inated glass and laminated safety glass: Part 1: Definitions and description of component parts Part 2: Laminated safety glass Part 3: Laminated glass Part 4: Test methods for durability Part 5: Dimensions and edge finishing Part 6: Appearance 2BS EN ISO 12543-6:2011 EN ISO 12543-6:2011 (E)INTERNATI

23、ONAL STANDARD ISO 201 1Glass in building Laminated glass and laminated safety glass Part 6: Appearance 1 Scope This part of ISO 12543 specifies defects of finished sizes and test methods with regard to the appearance of laminated glass when looking through the glass. NOTE Special attention is paid t

24、o acceptability criteria in the vision area. This part of ISO 12543 is applicable to finished sizes at the time of supply. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undat

25、ed references, the latest edition of the referenced document (including any amendments) applies. ISO 12543-1, Glass in building Laminated glass and laminated safety glass Part 1: Definitions and description of component parts ISO 12543-5, Glass in building Laminated glass and laminated safety glass

26、Part 5: Dimensions and edge finishing 3 Terms and definitions For the purposes of this document, the terms and definitions given in ISO 12543-1 and the following apply. 3.1 spot defect type of defect that includes opaque spots, bubbles and foreign bodies 3.2 linear defect type of defect that include

27、s foreign bodies and scratches or grazes 3.3 other defect glass defect, such as vents and interlayer defects, such as creases, shrinkage and streaks 2BS EN ISO 12543-6:2011 EN ISO 12543-6:2011 (E)2 ISO 20123.4 opaque spot visible defect in the laminated glass EXAMPLES Tin marks and inclusions in the

28、 glass or interlayer. 3.5 bubble usually air, in the glass or interlayer 3.6 foreign body unwanted item introduced into the laminated glass during manufacture 3.7 scratch linear damage to the outside surface of the laminated glass 3.8 graze damage to the outside surface of the laminated glass 3.9 ve

29、nt sharp-tipped fissure or crack running into the glass from an edge 3.10 crease distortion introduced into the interlayer by folds visible after manufacture 3.11 streak due to interlayer inhomogeneity distortion in the interlayer, caused by manufacturing defects in the interlayer, which are visible

30、 after manufacture 3.12 edge area perimeter of the pane, which is generally contained within the glazing system NOTE For pane sizes that are less than 5 m2, the width of the edge area as given in Figure 1 is 15 mm. The width of the edge area is increased to 20 mm for pane sizes that are greater than

31、 5 m2. BS EN ISO 12543-6:2011 EN ISO 12543-6:2011 (E) ISO 201 3Key 1 width of edge area L width of pane 2 edge area H height of pane 3 vision area Figure 1 Areas to be examined on finished sizes ready for glazing 3.13 vision area main area of the glass that excludes the edge area 4 Principle The lam

32、inated glass is put in a vertical position, in front of and parallel to a matt grey screen, and is lit by diffuse daylight or equivalent. The laminated glass is visually inspected perpendicularly at a distance of 2 m from the glass, with the matt screen on the other side of the glass. Any visible de

33、fects that are disturbing shall be marked. 5 Defects in the edge area for framed edges When inspected according to the test method given in Clause 4 , defects which do not exceed 5 mm in diameter or 5 % to the edge area are permitted. 6 Vents Vents are not permitted. 7 Creases and streaks These are

34、not allowed in the visual area. 2 BS EN ISO 12543-6:2011 EN ISO 12543-6:2011 (E)4 ISO 20128 Defects in the vision area 8.1 Spot defects in the vision area When inspected according to the test method given in Clause 4 , the admissibility of spot defects depends on the following: size of the defect; f

35、requency of the defect; size of the pane; number of panes as components of a laminated glass. The number of permissible defects in a pane shall be in accordance with Table 1. Defects less than 0,5 mm shall not be considered. Defects greater than 3 mm shall not be permitted. NOTE Admissibility of spo

36、t defects in laminated glass is independent of the individual glass thickness. Table 1 Permissible spot defects in the vision area Size of defect d mm 0,5 8 Number or density of permissible defects 2 panes 3 panes 4 panes 5 panes no limitation; however, no accumulation of defects 1 2 3 4 2 3 4 5 1/m

37、21,5/m22/m22,5/m21,2/m21,8/m22,4/m23/m2NOTE An accumulation of defects occurs if four or more defects are at a distance of 30 mm in lengtha5not allowed 5 to 8 1 8 2 a Linear defects less than 30 mm in length are allowed.9 Defects in the edge area for unframed edges Laminated glass is usually install

38、ed in frames. However, if laminated glass is unframed, its edges may be as follows, in accordance with ISO 12543-5: ground edges; polished edges; bevelled edges. When inspected according to the test method given in Clause 4 , shells and bubbles are permissible 2BS EN ISO 12543-6:2011 EN ISO 12543-6:

39、2011 (E)if they do not become obvious. Interlayer defects, i.e. extrusions and retractions, are permissible. This page deliberately left blankThis page deliberately left blankBSI is the independent national body responsible for preparing British Standards and other standards-related publications, in

40、formation and services. It presents the UK view on standards in Europe and at the international level. BSI is incorporated by Royal Charter. British Standards and other standardisation products are published by BSI Standards Limited.British Standards Institution (BSI)raising standards worldwideBSI38

41、9 Chiswick High Road London W4 4AL UKTel +44 (0)20 8996 9001Fax +44 (0)20 8996 Standards and PASs are periodically updated by amendment or revision. Users of British Standards and PASs should make sure that they possess the latest amendments or editions.It is the constant aim of BSI to improve the

42、quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using British Standards would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside frontcover. Similary for PASs, please notify BSI C

43、ustomer Services.Tel: +44 (0)20 8996 9001 Fax: +44 (0)20 8996 7001BSI offers BSI Subscribing Members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of British Standards and PASs.Tel: +44 (0)20 8996 7669 Fax: +44 (0)20 8996 7001Emai

44、l: Buying standardsYou may buy PDF and hard copy versions of standards directly using acredit card from the BSI Shop on the website addition all orders for BSI, international and foreign standards publicationscan be addressed to BSI Customer Services.Tel: +44 (0)20 8996 9001 Fax: +44 (0)20 8996 700

45、1Email: In response to orders for international standards, BSI will supply the British Standard implementation of the relevant international standard, unless otherwise requested.Information on standardsBSI provides a wide range of information on national, Europeanand international standards through

46、its Knowledge Centre.Tel: +44 (0)20 8996 7004 Fax: +44 (0)20 8996 7005Email: BSI Subscribing Members are kept up to date with standards developments and receive substantial discounts on the purchase priceof standards. For details of these and other benefits contact Membership Administration. Tel: +4

47、4 (0)20 8996 7002 Fax: +44 (0)20 8996 7001 Email: Information regarding online access to British Standards and PASs via British Standards Online can be found at information about British Standards is available on the BSI website at www.bsi- the data, software and documentation set out in all Briti

48、sh Standards and other BSI publications are the property of and copyrighted by BSI, or some person or entity that own copyright in the information used (such as the international standardisation bodies) has formally licensed such information to BSI for commerical publication and use. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the