EN ISO 12005-2003 en Lasers and Laser-Related Equipment - Test Methods for Laser Beam Parameters - Polarization《激光和激光相关设备 激光束参数的试验方法 偏振 ISO 12005-2003》.pdf

《EN ISO 12005-2003 en Lasers and Laser-Related Equipment - Test Methods for Laser Beam Parameters - Polarization《激光和激光相关设备 激光束参数的试验方法 偏振 ISO 12005-2003》.pdf》由会员分享，可在线阅读，更多相关《EN ISO 12005-2003 en Lasers and Laser-Related Equipment - Test Methods for Laser Beam Parameters - Polarization《激光和激光相关设备 激光束参数的试验方法 偏振 ISO 12005-2003》.pdf（24页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD BS EN ISO 12005:2003 Incorporating Corrigendum No. 1 Lasers and laser-related equipment Test methods for laser beam parameters Polarization The European Standard EN ISO 12005:2003 has the status of a British Standard ICS 31.260 BS ISO 12005:2003 This British Standard was published u

2、nder the authority of the Standards Policy and Strategy Committee on 1 May 2003 BSI 14 July 2003 ISBN 0 580 41658 5 National foreword This British Standard is the official English language version of EN ISO 12005:2003. It is identical with ISO 12005:2003. It supersedes BS EN ISO 12005:2000 which is

3、withdrawn. The UK participation in its preparation was entrusted by Technical Committee CPW/172, Optics and optical instruments, to Subcommittee CPW/172/9, Electro-optical systems, which has the responsibility to: A list of organizations represented on this subcommittee can be obtained on request to

4、 its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electro

5、nic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to und

6、erstand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document compri

7、ses a front cover, an inside front cover, the EN ISO title page, the EN ISO foreword page, the ISO title page, pages ii to v, a blank page, pages 1 to 11, the Annex ZA page, an inside back cover and a back cover. The BSI copyright date displayed in this document indicates when the document was last

8、issued. Amendments issued since publication Amd. No. Date Comments 14580 Corrigendum No. 1 14 July 2003 Correction to EN ISO foreword page and addition of Annex ZA pageEUROPEANSTANDARD NORMEEUROPENNE EUROPISCHENORM ENISO12005 April2003 ICS31.260 SupersedesENISO12005:1999 Englishversion Lasersandlase

9、rrelatedequipmentTestmethodsforlaser beamparametersPolarization(ISO12005:2003) LasersetquipementsassocisauxlasersMthodes dessaidesparamtresdufaisceaulaserPolarisation (ISO12005:2003) LaserundLaseranlagenPrfverfahrenfr LaserstrahlparameterPolarisation(ISO12005:2003) ThisEuropeanStandardwasapprovedbyC

10、ENon21February2003. CENmembersareboundtocomplywiththeCEN/CENELECInternalRegulationswhichstipulatetheconditionsforgivingthisEurope an Standardthestatusofanationalstandardwithoutanyalteration.Uptodatelistsandbibliographicalreferencesconcernings uchnational standardsmaybeobtainedonapplicationtotheManag

11、ementCentreortoanyCENmember. ThisEuropeanStandardexistsinthreeofficialversions(English,French,German).Aversioninanyotherlanguagemadebytra nslation undertheresponsibilityofaCENmemberintoitsownlanguageandnotifiedtotheManagementCentrehasthesamestatusasthe official versions. CENmembersarethenationalstan

12、dardsbodiesofAustria,Belgium,CzechRepublic,Denmark,Finland,France,Germany,Greece, Hungary,Iceland,Ireland,Italy,Luxembourg,Malta,Netherlands,Norway,Portugal,Slovakia,Spain,Sweden,SwitzerlandandUn ited Kingdom. EUROPEANCOMMITTEEFORSTANDARDIZATION COMITEUROPENDENORMALISATION EUROPISCHESKOMITEEFRNORMUN

13、G ManagementCentre:ruedeStassart,36B1050Brussels 2003CEN Allrightsofexploitationinanyformandbyanymeansreserved worldwideforCENnationalMembers. Ref.No.ENISO12005:2003ECORRECTED20030702 Foreword Thisdocument(ENISO12005:2003)hasbeenpreparedbyTechnicalCommitteeISO/TC172 “Opticsandopticalinstruments“inco

14、llaborationwithTechnicalCommitteeCEN/TC123“Lasers andlaserrelatedequipment“,thesecretariatofwhichisheldbyDIN. ThisEuropeanStandardshallbegiventhestatusofanationalstandard,eitherbypublicationof anidenticaltextorbyendorsement,atthelatestbyOctober2003,andconflictingnational standardsshallbewithdrawnatt

15、helatestbyOctober2003. ThisdocumentsupersedesENISO12005:1999. AccordingtotheCEN/CENELECInternalRegulations,thenationalstandardsorganizationsof thefollowingcountriesareboundtoimplementthisEuropeanStandard:Austria,Belgium,Czech Republic,Denmark,Finland,France,Germany,Greece,Hungary,Iceland,Ireland,Ita

16、ly, Luxembourg,Malta,Netherlands,Norway,Portugal,Slovakia,Spain,Sweden,Switzerlandand theUnitedKingdom. Endorsementnotice ThetextofISO12005:2003hasbeenapprovedbyCENasENISO12005:2003withoutany modifications. NOTENormativereferencestoInternationalStandardsarelistedinAnnexZA(normative). ENISO12005:2003

17、 INTERNATIONAL STANDARD ISO 12005 Second edition 2003-04-01 Reference number ISO 12005:2003(E) Lasers and laser-related equipment Test methods for laser beam parameters Polarization Lasers et quipements associs aux lasers Mthodes dessai des paramtres du faisceau laser PolarisationENISO12005:2003 ISO

18、 :50021(3002)E ii id FDPscalimer ThFDP si fam eliy ctnome niat deddebyepfa.sec In cacnadrociw eth sebodA sneciliycilop gn, thf siam elirp eb ytnide or viewb detu llahs ton tide ebed lnuet sst ehyfepcaa hcihw serdebme et desnecil era dedo tsni dnat no dellahpmoc eturep reformign ttide ehign. In odt g

19、nidaolnwsih liferap ,tcca seitpe trehnie snopser ehtitiliby fo nto fnirA gnigniycilop gnisnecil sebod. Teh SItneC Olar Seerctraiat catpecs ibail ontily t nih.aera si Aebod t a sirramedak fo AsyS ebodtmeI snocrropta.de teDlias fo tfos ehtwcudorp erats t desutaerc ot esih FDP fb nac elif et ni dnuoG e

20、hreneI lafnr oleative tt of eh;eli tP ehDF-rctaenoi temaraptpo erew sremizif deorp rinti.gn Evrey t neeb sah eracakt neo rusnee ttah tf ehtius si elibaf elosu re by ISO memdob rebsei. In eht kilnuyle evtne ttah a borplme rtaleit gno it si f,dnuo esaelp ifnrom thtneC erla ceSrteraita ta teh sserdda v

21、igoleb new. IOS 3002 Alr lithgs reresv.de sselnU toesiwreh sficep,dei rap ont fo thbup silitaciam nocudorper eb yde or tuilidez na nif yorm ro by nam ysnae, tcelerm ro cinocinahcela, tohp gnidulcnicopom dna gniyicrfomli, tiwuoht repsimsi noin wrtif gnirtie mohI reSO ta the asserdd ebwol or ISOmem sr

22、eb obyd t nitnuoc ehry fo teh euqertsre. SIc Oopyrigho tfifce saCsop etela 65 -HCG 1121eneva 02 T.le 22 14 + 10 947 11 Fxa + 22 14 0 94774 9 Eam-il ocpyrithgios.ogr Web wwwi.soo.rg ENISO12005:2003 iii Contents Page 1 Scope 1 2 Normative references 1 3 Terms and definitions 1 4 Test method for state

23、of polarization . 3 4.1 Principle of measurement 3 4.2 Equipment arrangement . 3 4.3 Components 4 4.4 Test procedure . 5 4.5 Analysis of the results 6 5 Test report 7 Annex A (informative) Complete description of the polarization status of a monochromatic laser beam 9 Bibliography . 11 ENISO12005:20

24、03 iv Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for whi

25、ch a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all m

26、atters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are cir

27、culated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held respon

28、sible for identifying any or all such patent rights. ISO 12005 was prepared by Technical Committee ISO/TC 172, Optics and optical instruments, Subcommittee SC 9, Electro-optical systems. This second edition cancels and replaces the first edition (ISO 12005:1999), which has been technically revised.

29、ENISO12005:2003 v Introduction This International Standard specifies a relatively quick and simple method, requiring minimum equipment, for determining the state of polarization of a laser beam. This method is for well-polarized laser beams, including those emitted by lasers with a high divergence a

30、ngle. However, if more completeness in the determination of the polarization status is required, the use of a more sophisticated analysing device is necessary. Although not within the scope of this International Standard, the principle of operation of such devices is given in Annex A, together with

31、a description of the Stokes parameters which are needed in that case. ENISO12005:2003 . ivANRETNIITOTS LANDNADRA ISO 00213002:5)E( Lasers and laser-related equipment Test methods for laser beam parameters Polarization 1S c o p e This International Standard specifies a method for determining the pola

32、rization status and, whenever possible, the degree of polarization of the beam from a continuous wave (cw) laser. It can also be applied to repetitively pulsed lasers, if their electric field vector orientation does not change from pulse to pulse. This International Standard also specifies the metho

33、d for determining the direction of the plane of oscillation in the case of linearly polarized (totally or partially) laser beams. It is assumed that the laser radiation is quasi- monochromatic and sufficiently stable for the purpose of the measurement. The knowledge of the polarization status can be

34、 very important for some applications of lasers with a high divergence angle, for instance when the beam of such a laser shall be coupled with polarization dependent devices (e.g. polarization maintaining fibres). This International Standard also specifies a method for the determination of the state

35、 of polarization of highly divergent laser beams, as well as for the measurement of beams with large apertures. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated referenc

36、es, the latest edition of the referenced document (including any amendments) applies. ISO 11145:2001, Optics and optical instruments Lasers and laser-related equipment Vocabulary and symbols IEC 61040:1990, Power and energy measuring detectors, instruments and equipment for laser radiation CIE 59-19

37、84, Definitions and Nomenclature, Instrument Polarization 3 Terms and definitions For the purposes of this document, the terms and definitions given in ISO 11145:2001, IEC 61040:1990, CIE 59-1984 and the following apply. 3.1 polarization restriction of oscillations of the electric field vector to ce

38、rtain directions NOTE This is a fundamental phenomenon which can be explained by the concept that electromagnetic radiation is a transverse wave motion, i. e. the vibrations are at right angles to the direction of propagation. It is customary to consider these vibrations as being those of the electric field vector. 3.2 state of polarization classification of polarization as linear, random, circular, elliptical or unpolarized ENISO12005:20031