EN ISO 10581-2013 en Resilient floor coverings - Homogeneous poly(vinyl chloride) floor covering - Specifications《弹性地板覆盖物 聚氯乙烯地板覆盖物 规格》.pdf

《EN ISO 10581-2013 en Resilient floor coverings - Homogeneous poly(vinyl chloride) floor covering - Specifications《弹性地板覆盖物 聚氯乙烯地板覆盖物 规格》.pdf》由会员分享，可在线阅读，更多相关《EN ISO 10581-2013 en Resilient floor coverings - Homogeneous poly(vinyl chloride) floor covering - Specifications《弹性地板覆盖物 聚氯乙烯地板覆盖物 规格》.pdf（16页珍藏版）》请在麦多课文档分享上搜索。

1、BSI Standards PublicationBS EN ISO 10581:2013Resilient floor coverings Homogeneous poly(vinylchloride) floor covering Specifications (ISO 10581:2011)BS EN ISO 10581:2013 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN ISO10581:2013. It is identical to ISO 10581:

2、2011. It supersedes BS EN649:2011 which is withdrawn.The UK participation in its preparation was entrusted to TechnicalCommittee PRI/60, Resilient floor coverings.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to inc

3、lude all the necessaryprovisions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2013. Published by BSI StandardsLimited 2013ISBN 978 0 580 82037 3ICS 97.150Compliance with a British Standard cannot confer immunity fromlegal obligations.This British

4、 Standard was published under the authority of theStandards Policy and Strategy Committee on 30 November 2013.Amendments issued since publicationDate Text affectedEUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 10581 October 2013 ICS 97.150 Supersedes EN 649:2011English Version Resilient fl

5、oor coverings - Homogeneous poly(vinyl chloride) floor covering - Specifications (ISO 10581:2011) Revtements de sol rsilients - Revtements de sol homognes en poly(chlorure de vinyle) - Spcifications (ISO 10581:2011) Elastische Bodenbelge - Homogene Polyvinylchlorid-Bodenbelge - Spezifikation (ISO 10

6、581:2011) This European Standard was approved by CEN on 12 October 2013. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliogra

7、phical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibil

8、ity of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic

9、of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISAT

10、ION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2013 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 10581:2013: EBS EN ISO 10581:2013EN ISO 10581:2013 (E) 3 Foreword The text

11、 of ISO 10581:2011 has been prepared by Technical Committee ISO/TC 219 “Floor coverings” of the International Organization for Standardization (ISO) and has been taken over as EN ISO 10581:2013 by Technical Committee CEN/TC 134 “Resilient, textile and laminate floor coverings” the secretariat of whi

12、ch is held by NBN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by April 2014, and conflicting national standards shall be withdrawn at the latest by April 2014. Attention is drawn to the possibil

13、ity that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 649:2011. According to the CEN-CENELEC Internal Regulations, the national standards organiza

14、tions of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Mal

15、ta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Endorsement notice The text of ISO 10581:2011 has been approved by CEN as EN ISO 10581:2013 without any modification. BS EN ISO 10581:2013ISO 10581:2011(E) ISO 2011 All

16、rights reserved iiiContents Page Foreword iv 1 Scope 1 2 Normative references 1 3 Terms and definitions . 2 4 Requirements . 2 5 Classification . 3 6 Marking, labelling and packaging 5 Annex A (informative) Optional properties . 6 Bibliography 7 BS EN ISO 10581:2013ISO 10581:2011(E) iv ISO 2011 All

17、rights reservedForeword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subjec

18、t for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC)

19、 on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committee

20、s are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be he

21、ld responsible for identifying any or all such patent rights. ISO 10581 was prepared by Technical Committee ISO/TC 219, Floor coverings. BS EN ISO 10581:2013INTERNATIONAL STANDARD ISO 10581:2011(E) ISO 2011 All rights reserved 1Resilient floor coverings Homogeneous poly(vinyl chloride) floor coverin

22、g Specification 1 Scope This International Standard specifies the characteristics of homogeneous floor coverings, based on poly(vinyl chloride), supplied in either tile or roll form. Products may contain a transparent, non-PVC factory finish. To encourage the consumer to make an informed choice, thi

23、s International Standard includes a classification system (see ISO 10874) based on intensity of use, which shows where these floor coverings should give satisfactory service. It also specifies requirements for marking. 2 Normative references The following referenced documents are indispensable for t

24、he application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 105-BO2:1994, Textiles Tests for colour fastness Part B02: Colour fastness to artificial light: Xenon a

25、rc fading lamp test ISO 4918, Resilient, textile and laminate floor coverings Castor chair test ISO 10874, Resilient, textile and laminate floor coverings Classification ISO 24340, Resilient floor coverings Determination of thickness of layers ISO 24341, Resilient and textile floor coverings Determi

26、nation of length, width, and straightness of sheet ISO 24342, Resilient and textile floor-coverings Determination of side length, edge straightness and squareness of tiles ISO 24346, Resilient floor coverings Determination of overall thickness ISO 23996, Resilient floor coverings Determination of de

27、nsity ISO 23997, Resilient floor coverings Determination of mass per unit area ISO 23999, Resilient floor coverings Determination of dimensional stability and curling after exposure to heat ISO 24343-1, Resilient and laminate floor coverings Determination of indentation and residual indentation Part

28、 1: Residual indentation ISO 24344, Resilient floor coverings Determination of flexibility and deflection ASTM F 1515, Standard Test Method for Measuring Light Stability of Resilient Flooring by Color Change EN 684, Resilient floor coverings Determination of seam strength BS EN ISO 10581:2013ISO 105

29、81:2011(E) 2 ISO 2011 All rights reserved3 Terms and definitions For the purposes of this document, the following terms apply. 3.1 poly(vinyl chloride) floor coverings PVC floor covering with surface layers which are produced using poly(vinyl chloride) as binder 3.2 homogeneous floor covering floor

30、covering with one or more layers of the same composition and colour, patterned throughout its thickness 3.3 factory finish transparent coating applied during the manufacture NOTE 1 The finish is usually not thicker than 0,03 mm. NOTE 2 This coating should not be counted as part of the wear layer. 3.

31、4 binder content portion of the flooring composition, consisting of poly(vinyl chloride) resin, plasticizers and stabilizers NOTE Binder content is expressed as a percentage mass fraction of the total composition. 4 Requirements 4.1 Identification requirements Products described in this Internationa

32、l Standard shall be identified by binder content by weight as shown in Table 1. Table 1 Identification requirements Type Minimum Binder Content % Maximum Binder Content % I 55 II 35 55 III 25 35 4.2 General requirements Floor coverings described in this International Standard shall conform to the ap

33、propriate general requirements specified in Table 2 when tested in accordance with the methods given therein. BS EN ISO 10581:2013ISO 10581:2011(E) ISO 2011 All rights reserved 3Table 2 General minimum requirements Characteristic Requirement Test method Roll form: length m width m Not less than the

34、nominal values ISO 24341 Tiles: side length mm(does not apply to planks) squareness and straightness for side length mm 400 mm 400 mm 400 mm (intended for heat welding) Deviation 0,13 % of nominal length up to 0,5 mm maximum Deviation allowed at any point 0,25 0,35 0,50 ISO 24342 Overall thickness:

35、mm average individual results Nominal value +0,15 0,10 Shall not be more than 0,15 from the average value ISO 24346 Mass per unit area g/m2average Nominal value + 13 %/10 % ISO 23997 Residual indentation (average) mm 0,1 ISO 24343-1 Dimensional stability after exposure to heat: % sheets and tiles in

36、tended for welding tiles (intended for dry-joint laying) 0,40 0,25 ISO 23999 Flexibility 20 mm mandrel, no cracking. For products which show signs of cracking, perform a further test using a 40 mm mandrel. If results show no further cracking, record the use of a 40 mm mandrel. ISO 24344, Method A Ef

37、fect of castor chair After 25 000 cycles, no delamination shall occur. No disturbance to the surface other than slight change in appearance. ISO 4918 Colour fastness to artificial light 6 minimum or ISO 105-BO2, Method 3aE 8 after 300 hr. ASTM F 1515 aExpose a full size test specimen. Store a furthe

38、r test specimen in the dark, which will constitute the reference standard for assessment of colour change.5 Classification The classification scheme for resilient floor coverings is described in ISO 10874. The requirements for homogeneous PVC floor covering in accordance with this scheme are specifi

39、ed in Table 3. BS EN ISO 10581:2013ISO 10581:2011(E) 4 ISO 2011 All rights reservedTable 3 Classification of minimum requirements for level of use Class Symbol Level of use Overall thickness, nominal value mm Seam strength N/50 mm Type I Type II Type III Domestic No requirement 21 Moderate/Light 1.0

40、 1.0 1.0 22 General/Medium 1.5 1.5 1.5 22+ General 1.5 1.5 1.5 23 Heavy 1.5 1.5 1.5 Commercial When welded in accordance with the manufacturers instructions: average value 240 Individual values 180 31 Moderate 1.5 1.5 1.5 32 General 1.5 1.5 2.0 33 Heavy 2.0 2.0 2.0 34 Very heavy 2.0 2.0 2.5 Light In

41、dustrial 41 Moderate 1.5 1.5 2.0 42 General 2.0 2.0 2.0 43 Heavy 2.0 2.0 2.5 Test Method ISO 24346 ISO 24346 ISO 24346 EN 684 BS EN ISO 10581:2013ISO 10581:2011(E) ISO 2011 All rights reserved 56 Marking, labelling and packaging Floor coverings covered by this International Standard and/or their pac

42、kaging shall bear the following marking: a) number and date of this document, i.e. ISO 10581:2011; b) manufacturer or suppliers identification; c) product name; d) colour/pattern, batch number and, if applicable, roll number; e) classes/symbols appropriate for the product; f) for rolls: the length,

43、width and thickness; and g) for tiles: the dimensions of a tile and the area in square metres contained in the package. BS EN ISO 10581:2013ISO 10581:2011(E) 6 ISO 2011 All rights reservedAnnex A (informative) Optional properties Where the following properties are required for specific applications,

44、 the floor covering should be tested in accordance with the appropriate methods: Electrical resistance (ASTM F 150, EN 1081, ANSI/ESD S7.1, ANSI/ESD STM 97.1); Electrical propensity (EN 1815, ANSI/ESD STM97.2); Effects of stains (ASTM F 925, EN 423, ISO 26987); Reaction to fire; determination of the

45、 burning behaviour using a radiant heat source (EN ISO 9239-1:2002, ASTM E 648); Reaction to fire; Ignitability when subject to direct impingement of flame (EN ISO 11925-2:2002); Reaction to fire, specific optical density of smoke generated (ASTM E 662); Resistance to heat (ASTM F 1514). BS EN ISO 1

46、0581:2013ISO 10581:2011(E) ISO 2011 All rights reserved 7Bibliography 1 ANSI/ESD S7.1, Resistive characterization of materials Floor materials 2 ANSI/ESD STM97.1, Floor materials and footwear Resistance measurement in combination with a person 3 ANSI/ESD STM97.2, Floor materials and footwear Voltage

47、 measurement in combination with a person 4 ASTM F 150, Standard Test Method for Electrical Resistance of Conductive and Static Dissipative Resilient Flooring 5 ASTM F 925, Standard Test Method for Resistance to Chemicals of Resilient Flooring 6 ASTM E 648, Standard Test Method for Critical Radiant

48、Flux of Floor Covering Systems Using a Radiant Heat Energy Source 7 ASTM E 662, Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials 8 ASTM F 1514, Standard Test Method for Measuring Heat Stability of Resilient Flooring by Color Change 9 ASTM F 1913, Standard Speci

49、fication for Vinyl Sheet Floor Covering Without Backing 10 EN 423, Resilient floor coverings Determination of the effect of stains 11 EN 649, Resilient floor coverings Homogeneous and heterogeneous poly(vinyl chloride) floor coverings Specification 12 EN 1081, Resilient floor coverings Determination of the electrical resistance 13 EN 1815, Resilient and textile floor coverings Assessment of static electrical propensity