EN ISO 7547-2004 en Ships and marine technology - Air-conditioning and ventilatiion of accommodation spaces - Design conditions and basis of calculations《船舶和海上技术 住舱的空调和通风 设计条件和计算基础.pdf

《EN ISO 7547-2004 en Ships and marine technology - Air-conditioning and ventilatiion of accommodation spaces - Design conditions and basis of calculations《船舶和海上技术 住舱的空调和通风 设计条件和计算基础.pdf》由会员分享，可在线阅读，更多相关《EN ISO 7547-2004 en Ships and marine technology - Air-conditioning and ventilatiion of accommodation spaces - Design conditions and basis of calculations《船舶和海上技术 住舱的空调和通风 设计条件和计算基础.pdf（20页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARDBS EN ISO 7547:2004Ships and marine technology Air-conditioning and ventilation of accommodation spaces Design conditions and basis of calculationsICS 47.020.80; 47.020.90g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g

2、55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58Incorporating corrigendum September 2008BS EN ISO 7547:2004This British Standard, havingbeen prepared under thedirection of the EngineeringSector Policy and StrategyCommittee, was publishedunder the authority of t

3、heStandards Policy and StrategyCommittee on 12 November 2002National forewordAmendments/corrigenda issued since publicationThis British Standard is the UK implementation of EN ISO 7547:2004. It is identical with ISO 7547:2002, incorporating corrigendum September 2008. It supersedes BS MA 103:1986 wh

4、ich is withdrawn.The start and finish of text introduced or altered by corrigendum is indicated The UK participation in its preparation was entrusted by Technical Commitee SME/32, Ships and marine technology, to Subcommittee SME/32/3, Piping and machinery.A list of organizations represented on this

5、subcommittee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application.Compliance with a British Standard cannot confer immunity from legal obligations.Amd. No. Date Comments

6、15585 28 April 2006This corrigendum renumbers BS ISO 7547:2002 as BS EN ISO 7547:2004 30 June 2009Implementation of ISO corrigendum September 2008ISBN 978 0 580 66751 0 BSI 2009 in the text by tags. Text altered by ISO corrigendum September 2008 is indicated in the text by .AC1AC1EUROPEAN STANDARDNO

7、RME EUROPENNEEUROPISCHE NORMEN ISO 7547December 2004ICS 47.020.80; 47.020.90English versionShips and marine technology - Air-conditioning and ventilatiionof accommodation spaces - Design conditions and basis ofcalculations (ISO 7547:2002)Navires et technologie maritime - Conditionnement dair etventi

8、lation des emmnagements - Conditions deconception et bases de calcul (ISO 7547:2002)Schiffe und Meerestechnik - Klimatisierung und Lftung vonUnterkunftsrumen auf Schiffen - Grundlagen fr Entwurfund Auslegung (ISO 7547:2002)This European Standard was approved by CEN on 21 December 2004.CEN members ar

9、e bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to th

10、e Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status

11、 as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spa

12、in, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMIT EUROPEN DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNGManagement Centre: rue de Stassart, 36 B-1050 Brussels 2004 CEN All rights of exploitation in any form and by any means reservedworldwide for CEN national Memb

13、ers.Ref. No. EN ISO 7547:2004: EForeword The text of ISO 7547:2002 has been prepared by Technical Committee ISO/TC 8 “Ships and marine technology” of the International Organization for Standardization (ISO) and has been taken over as EN ISO 7547:2004 by Technical Committee CEN/TC 300 “Sea-going vess

14、els and marine technology“, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2005, and conflicting national standards shall be withdrawn at the latest

15、by June 2005. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Ita

16、ly, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. Endorsement notice The text of ISO 7547:2002 has been approved by CEN as EN ISO 7547:2004 without any modifications. BS EN ISO 7547:2004 EN ISO 7547:200

17、4 (E)I SO 2002 All irthgs ersedevr iiiContents Page Foreword ii 1 Scope 1 2 Normative references 1 3 Terms and definitions. 1 4 Design conditions . 2 4.1 General . 2 4.2 Summer temperatures and humidities 2 4.3 Winter temperatures . 2 4.4 Outdoor air. 2 4.5 Occupancy . 3 5 Calculation of heat gains

18、and losses 3 5.1 Applicability . 3 5.2 Heat transmission . 3 5.3 Solar heat gain. 7 5.4 Heat gain from persons 7 5.5 Heat gain from lighting and other sources. 8 6 Airflow calculation 8 6.1 Volume of space 8 6.2 Supply airflow 8 6.3 Temperature of supply airflow. 9 6.4 Exhaust airflow 9 6.5 Air bala

19、nce . 9 Annex A (informative) Guidance and good practice in the design of ventilation and air-conditioning systems in ships . 10 Annex B (informative) Thermal conductivities of commonly used construction materials . 13 iiiBS EN ISO 7547:2004 EN ISO 7547:2004 (E)I SO 2002 All irthgs ersedevr 1Ships a

20、nd marine technology Air-conditioning and ventilation of accommodation spaces Design conditions and basis of calculations 1 Scope This International Standard specifies design conditions and methods of calculation for air-conditioning and ventilation of accommodation spaces and the radio cabin on boa

21、rd seagoing merchant ships for all conditions except those encountered in extremely cold or hot climates (i.e. with lower or higher conditions than those stated in 4.2 and 4.3). Annex A provides guidance and details of good practice in the design of ventilation and air-conditioning systems in ships.

22、 Annex B gives the thermal conductivities of commonly used construction materials. Users of this International Standard should note that, while observing the requirements of this International Standard, they should at the same time ensure compliance with statutory requirements, rules and regulations

23、 as may be applicable to the individual ship concerned. 2 Normative references The following normative documents contain provisions which, through reference in this text, constitute provisions of this International Standard. For dated references, subsequent amendments to, or revisions of, any of the

24、se publications do not apply. However, parties to agreements based on this International Standard are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of the normative document referr

25、ed to applies. Members of ISO and IEC maintain registers of currently valid International Standards. ISO 31-4:1992, Quantities and units Part 4: Heat ISO 3258:1976, Air distribution and air diffusion Vocabulary 3 Terms and definitions For the purposes of this International Standard, the definitions

26、given in ISO 31-4, ISO 3258 and the following apply. 3.1 accommodation space used as public rooms, cabins, offices, hospitals, cinemas, games and hobby rooms, hairdressing saloons and pantries without cooking appliances 3.2 air-conditioning form of air treatment whereby temperature, humidity, ventil

27、ation and air cleanliness are all controlled within limits prescribed for the enclosure to be air-conditioned 1BS EN ISO 7547:2004 EN ISO 7547:2004 (E)2 3.3 ventilation provision of air to an enclosed space, sufficient for the needs of the occupants or the process 3.4 relative humidity ratio, in hum

28、id air, expressed as a percentage, of the water vapour actual pressure to the saturated vapour pressure at the same dry bulb temperature 3.5 dry bulb temperature temperature indicated by a dry temperature-sensing element shielded from the effects of radiation EXAMPLE The bulb of a mercury-in-glass t

29、hermometer is an example of a dry temperature-sensing element. 4 Design conditions 4.1 General The system shall be designed for the indoor air conditions specified in 4.2 and 4.3 in all accommodation spaces defined in 3.1 at the stated outdoor air conditions and the outdoor supply airflow, ventilati

30、on and air balance given in 6.2.1, 6.2.2 and 6.5 respectively. NOTE All temperatures stated are dry bulb temperatures. 4.2 Summer temperatures and humidities Summer temperatures and humidities are as follows: a) Outdoor air: + 35 C and 70 % humidity; b) Indoor air: + 27 C and 50 % humidity. NOTE In

31、practice, the indoor air conditions obtained, especially humidity, can be different from those stated. 4.3 Winter temperatures Winter temperatures are as follows: a) Outdoor air: 20 C; b) Indoor air: + 22 C. NOTE This International Standard does not specify requirements for humidification in winter.

32、 4.4 Outdoor air The minimum quantity of outdoor air shall be not less than 40 % of the total air supplied to the spaces concerned. 2BS EN ISO 7547:2004 EN ISO 7547:2004 (E)4.5 Occupancy The number of persons to be allowed for in the various accommodation spaces shall be as follows, unless otherwise

33、 stated by the purchaser. a) Cabins: the maximum number of persons for which the cabin was designed; b) Public rooms such as saloons, mess- or dining-rooms and recreation rooms: the number of persons who can be seated or, in the case where the purchaser does not specify: i) one person per 2 m2floor

34、area for saloons; ii) one person per 1,5 m2floor area for mess- or dining-rooms; iii) one person per 5 m2floor area for recreation-rooms; c) Captains and chief engineers day-room: four persons; d) Other private day-rooms: three persons; e) Hospital: the number of beds plus two; f) Gymnasium, games-r

35、oom: four persons; g) First-aid-room: two persons; h) Offices: two persons. 5 Calculation of heat gains and losses 5.1 Applicability For the calculation of summer conditions, 5.2 to 5.5 inclusive shall apply. For the calculation of winter conditions, 5.2 only shall apply. 5.2 Heat transmission 5.2.1

36、 Method of calculation The following formula shall be used for calculating the transmission losses or gains, in watts, for each separate surface: 113()()vv ggT kA kA=+AC1AC1BS EN ISO 7547:2004 EN ISO 7547:2004 (E)4 I SO 2002 All irthgs ersedevrwhere T is the difference in air temperature, in kelvins

37、, (for the difference of air temperature between air-conditioned and non-air-conditioned internal spaces, see 5.2.2); kvis the total heat transfer coefficient, in watts per square metre kelvin, for the surface Av(see 5.2.3); Avis the surface, in square metres, excluding side scuttles and rectangular

38、 windows (glazing + 200 mm) (see Figures 1 and 2); kgis the total heat transfer coefficient, in watts per square metre kelvin, for the surface Ag(see 5.2.3); Agis the area, in square metres, of side scuttles and rectangular windows (glazing + 200 mm) (see Figures 1 and 2). Dimensions in millimetres

39、Dimensions in millimetres Figure 1 Side scuttles Figure 2 Rectangular windows 5.2.2 Temperature differences between adjoining internal spaces For differences of air temperature, T, in kelvins, between conditioned and non-air-conditioned internal spaces, see Table 1. Table 1 Temperature differences b

40、etween adjoining internal spaces T, K Deck or bulkhead Summer Winter Deck against tank provided with heating 43 Deck with bulkhead against boiler-room 28 Deck and bulkhead against engine-room and against non-air-conditioned gallery 18 17 Deck and bulkhead against non-heated tanks, cargo spaces and e

41、quivalent 13 42 Deck and bulkhead against laundry 11 17 Deck and bulkhead against public sanitary space 6 0 Deck and bulkhead against private sanitary space a) with any part against exposed external surface 2 0 b) not exposed 1 0 c) with any part against engine/boiler-room 6 0 Bulkhead against alley

42、way 2 5 NOTE It is understood that means of heating are provided in exposed sanitary spaces.4BS EN ISO 7547:2004 EN ISO 7547:2004 (E)I SO 2002 All irthgs ersedevr 55.2.3 Total heat transfer coefficients The values for the total heat transfer coefficients, k, in watts per square metre kelvin, given i

43、n Table 2 assume that adequate thermal insulation is provided on all surfaces exposed to outdoor conditions or adjoining hot or cold spaces, or hot equipment or pipework. The values given in Table 2 shall be used where appropriate, unless otherwise advised by the purchaser. For other cases, a method

44、 calculation of coefficient is given in 5.2.4. 5.2.4 Calculation of heat transfer coefficient The heat transfer coefficient shall be calculated as follows: Lb11dM Mk+=+where k is the total heat transfer coefficient, in watts per square metre kelvin W/(m2K); is the coefficient of heat transfer for su

45、rface air, in watts per square metre kelvin W/(m2K), as follows: = 80 W/(m2K) for outer surface exposed to wind (20 m/s), = 8 W/(m2K) for inside surface not exposed to wind (0,5 m/s); d is the thickness of material, in metres; is the thermal conductivity, in watts per metre kelvin W/(mK); MLis the t

46、hermal insulance for an air gap, in square metres kelvin per watt m2K/W); Mbis the thermal insulance between different layers of material, in square metres kelvin per watt m2K/W); is a correction factor for steel structure as follows: = 1,2 for insulation in accordance with Figure 3, = 1,45 for insu

47、lation in accordance with Figure 4. Figure 3 Plane insulation of uniform thickness Figure 4 Corrugated insulation of uniform thickness 5BS EN ISO 7547:2004 EN ISO 7547:2004 (E)6 I SO 2002 All irthgs ersedevrTable 2 Total heat transfer coefficient Surfaces Total heat transfer coefficient, W/(m2K) Wea

48、ther deck not exposed to suns radiation and ship side and external bulkheads 0,9 Deck and bulkhead against engine-room, cargo space or other non-air-conditioned spaces 0,8 Deck and bulkhead against boiler-room or boiler in engine-room 0,7 Deck against open air or weather deck exposed to suns radiati

49、on and deck against hot tanks 0,6 Side scuttles and rectangular windows, single glazing 6,5 Side scuttles and rectangular windows, double glazing 3,5 Bulkhead against alleyway, non-sound reducing 2,5 Bulkhead against alleyway, sound reducing 0,9 NOTE Guidance on values of thermal conductivities of commonly used materials is given in annex B. For thermal insulance, ML, of non-ventilated air gaps, see Table 3. Table 3 Thermal insulance of non-ventilated air ga