EN ISO 6553-2017 en Automatic steam traps - Marking《自动蒸汽疏水阀的标志(ISO 6553 2016)》.pdf

《EN ISO 6553-2017 en Automatic steam traps - Marking《自动蒸汽疏水阀的标志(ISO 6553 2016)》.pdf》由会员分享，可在线阅读，更多相关《EN ISO 6553-2017 en Automatic steam traps - Marking《自动蒸汽疏水阀的标志(ISO 6553 2016)》.pdf（14页珍藏版）》请在麦多课文档分享上搜索。

1、BS EN ISO 6553:2017Automatic steam traps Marking (ISO 6553:2016)BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06BS EN ISO 6553:2017 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN ISO 6553:2017. It supersedes BS EN 26553:1991 whi

2、ch is withdrawn.The UK participation in its preparation was entrusted to Technical Committee PSE/18/1, Industrial valves, steam traps, actuators and safety devices against excessive pressure - Valves - Basic standards.A list of organizations represented on this committee can be obtained on request t

3、o its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2017.Published by BSI Standards Limited 2017ISBN 978 0 580 91621 2 ICS 23.040.99; 23.060.01 Compliance with a

4、British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 January 2017.Amendments/corrigenda issued since publicationDate T e x t a f f e c t e dEUROPEAN STANDARD NORME EUROPENNE EUROPIS

5、CHE NORM EN ISO 6553 January 2017 ICS 23.060.01 Supersedes EN 26553:1991English Version Automatic steam traps - Marking (ISO 6553:2016) Purgeurs automatiques de vapeurs deau - Marquage (ISO 6553:2016) Kondensatableiter - Kennzeichnung (ISO 6553:2016)This European Standard was approved by CEN on 23 D

6、ecember 2016. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be

7、 obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to t

8、he CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ir

9、eland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Mana

10、gement Centre: Avenue Marnix 17, B-1000 Brussels 2017 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 6553:2017 EBS EN ISO 6553:2017EN ISO 6553:2017 (E) 3 European foreword This document (EN ISO 6553:2017) has been prepared by

11、Technical Committee ISO/TC 153 “Valves” in collaboration with Technical Committee CEN/TC 69 “Intelligent transport systems” the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement

12、, at the latest by July 2017, and conflicting national standards shall be withdrawn at the latest by July 2017. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any o

13、r all such patent rights. This document supersedes EN 26553:1991. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Es

14、tonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Endorsement n

15、otice The text of ISO 6553:2016 has been approved by CEN as EN ISO 6553:2017 without any modification. BS EN ISO 6553:2017ISO 6553:2016(E)Foreword ivIntroduction v1 Scope . 12 Normative references 13 Terms and definitions . 14 General requirements . 15 Mandatory marking. 16 Optional markings 27 Addi

16、tional markings . 2Bibliography 3 ISO 2016 All rights reserved iiiContents PageBS EN ISO 6553:2017ISO 6553:2016(E)ForewordISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards

17、 is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take p

18、art in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In partic

19、ular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).Attention is drawn to the possibility that some of the elements of thi

20、s document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.

21、iso.org/patents).Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISOs adherence to the

22、World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following URL: www.iso.org/iso/foreword.html.This document was prepared by the European Committee for Standardization (CEN) Technical Committee CEN/TC 69, Industrial valves, in collaboration with ISO Technical

23、 Committee ISO/TC 153, Valves, in accordance with the agreement on technical cooperation between ISO and CEN (Vienna Agreement).This second edition cancels and replaces the first edition (ISO 6553:1980), which has been technically revised with the marking updated to be in accordance with ISO 5209 an

24、d EN 19.iv ISO 2016 All rights reservedBS EN ISO 6553:2017ISO 6553:2016(E)IntroductionThe purpose of this document is to establish certain basic requirements for the marking of automatic steam traps, and to give recommendations for additional information markings.This document has, in general, to be

25、 considered in conjunction with the specific requirements which may be agreed between the parties concerned. ISO 2016 All rights reserved vBS EN ISO 6553:2017BS EN ISO 6553:2017Automatic steam traps Marking1 ScopeThis document specifies mandatory and optional markings for automatic steam traps.2 Nor

26、mative referencesThere are no normative references in this document.3 Terms and definitionsFor the purposes of this document, the terms and definitions given in ISO 6552 apply.ISO and IEC maintain terminological databases for use in standardization at the following addresses: IEC Electropedia: avail

27、able at http:/www.electropedia.org/ ISO Online browsing platform: available at http:/www.iso.org/obp4 General requirementsThe specified markings shall be applied: either on the body, or on plates integral with the body or securely fixed on the body.In no case shall the markings be hidden by the fixi

28、ng elements of the steam trap.5 Mandatory markingThe following items shall be marked on the automatic steam trap: manufacturers name and/or trademark; maximum allowable pressure (bar or MPa)1); maximum allowable temperature (C); indication of the flow direction (arrow); shell material designation; n

29、ominal size (DN or NPS); nominal pressure (PN or Class designation).This marking is in compliance with ISO 5209 and EN 19. If a steam trap has no defined PN or Class designation, maximum allowable pressure and maximum allowable temperature are mandatory.For PN or Class designated steam traps, it is

30、permissible to omit the letters “DN” or “NPS” from the nominal size designation provided the PN or Class designation follows immediately after the size 1) 1 bar = 0,1 MPa.INTERNATIONAL STANDARD ISO 6553:2016(E) ISO 2016 All rights reserved 1BS EN ISO 6553:2017ISO 6553:2016(E)number and is on the sam

31、e line. For example, DN 50 PN 25 may be abbreviated to 50 PN 25 and NPS 2 Class 300 may be abbreviated to 2 CL 300.NOTE For steam traps less than or equal to DN 50 or NPS 2, the shell material marking can be omitted.6 Optional markingsThe following items may be marked on the automatic steam trap: ma

32、ximum operating pressure, or maximum differential pressure, according to the relative significance of each one; maximum test pressure (bar or MPa).7 Additional markingsA manufacturer having complied with the requirements in Clause 4 to Clause 6 maya) mark any of the items mentioned in Clause 5 and C

33、lause 6 in more than one place,EXAMPLE 1 If an item is marked on the body, it may also be repeated on the identification plate.b) add any other markings.EXAMPLE 2 Catalogue item numbers, provided that there is no risk of confusion between these markings and those mentioned in Clause 5 and Clause 6.2

34、 ISO 2016 All rights reservedBS EN ISO 6553:2017ISO 6553:2016(E)Bibliography1 ISO 5209, General purpose industrial valves Marking2 ISO 6552, Automatic steam traps Definition of technical terms3 EN 19, Industrial valves Marking of metallic valves ISO 2016 All rights reserved 3This page deliberately l

35、eft blankThis page deliberately left blankBSI is the national body responsible for preparing British Standards and other standards-related publications, information and services.BSI is incorporated by Royal Charter. British Standards and other standardization products are published by BSI Standards

36、Limited.British Standards Institution (BSI)About usWe bring together business, industry, government, consumers, innovators and others to shape their combined experience and expertise into standards -based solutions.The knowledge embodied in our standards has been carefully assembled in a dependable

37、format and refined through our open consultation process. Organizations of all sizes and across all sectors choose standards to help them achieve their goals.Information on standardsWe can provide you with the knowledge that your organization needs to succeed. Find out more about British Standards b

38、y visiting our website at or contacting our Customer Services team or Knowledge Centre.Buying standardsYou can buy and download PDF versions of BSI publications, including British and adopted European and international standards, through our website at where hard copies can also be purchased. If y

39、ou need international and foreign standards from other Standards Development Organizations, hard copies can be ordered from our Customer Services team.Copyright in BSI publicationsAll the content in BSI publications, including British Standards, is the property of and copyrighted by BSI or some pers

40、on or entity that owns copyright in the information used (such as the international standardization bodies) and has formally licensed such information to BSI for commercial publication and use.Save for the provisions below, you may not transfer, share or disseminate any portion of the standard to an

41、y other person. You may not adapt, distribute, commercially exploit, or publicly display the standard or any portion thereof in any manner whatsoever without BSIs prior written consent.Storing and using standardsStandards purchased in soft copy format: A British Standard purchased in soft copy forma

42、t is licensed to a sole named user for personal or internal company use only. The standard may be stored on more than 1 device provided that it is accessible by the sole named user only and that only 1 copy is accessed at any one time. A single paper copy may be printed for personal or internal comp

43、any use only.Standards purchased in hard copy format: A British Standard purchased in hard copy format is for personal or internal company use only. It may not be further reproduced in any format to create an additional copy. This includes scanning of the document.If you need more than 1 copy of the

44、 document, or if you wish to share the document on an internal network, you can save money by choosing a subscription product (see Subscriptions).Reproducing extractsFor permission to reproduce content from BSI publications contact the BSI Copyright & Licensing team.SubscriptionsOur range of subscri

45、ption services are designed to make using standards easier for you. For further information on our subscription products go to British Standards Online (BSOL) youll have instant access to over 55,000 British and adopted European and international standards from your desktop. Its available 24/7 and

46、is refreshed daily so youll always be up to date. You can keep in touch with standards developments and receive substantial discounts on the purchase price of standards, both in single copy and subscription format, by becoming a BSI Subscribing Member. PLUS is an updating service exclusive to BSI Su

47、bscribing Members. You will automatically receive the latest hard copy of your standards when theyre revised or replaced. To find out more about becoming a BSI Subscribing Member and the benefits of membership, please visit a Multi-User Network Licence (MUNL) you are able to host standards publicat

48、ions on your intranet. Licences can cover as few or as many users as you wish. With updates supplied as soon as theyre available, you can be sure your documentation is current. For further information, email .RevisionsOur British Standards and other publications are updated by amendment or revision.

49、 We continually improve the quality of our products and services to benefit your business. If you find an inaccuracy or ambiguity within a British Standard or other BSI publication please inform the Knowledge Centre.Useful ContactsCustomer ServicesTel: +44 345 086 9001Email (orders): Email (enquiries): SubscriptionsTel: +44 345 086 9001Email: subscriptio