EN ISO 216-2007 en Writing paper and certain classes of printed matter - Trimmed sizes - A and B series and indication of machine direction《印刷品的书写纸和某些类别 裁切尺寸 A B系列以及机器标记范围》.pdf

《EN ISO 216-2007 en Writing paper and certain classes of printed matter - Trimmed sizes - A and B series and indication of machine direction《印刷品的书写纸和某些类别 裁切尺寸 A B系列以及机器标记范围》.pdf》由会员分享，可在线阅读，更多相关《EN ISO 216-2007 en Writing paper and certain classes of printed matter - Trimmed sizes - A and B series and indication of machine direction《印刷品的书写纸和某些类别 裁切尺寸 A B系列以及机器标记范围》.pdf（18页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARDBS EN ISO 216:2007Writing paper and certain classes of printed matter Trimmed sizes A and B series, and indication of machine directionThe European Standard EN ISO 216:2007 has the status of a British StandardICS 85.080.10g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g4

2、4g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58BS EN ISO 216:2007This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 January 2008 BSI 2008ISBN 978 0 580

3、 53874 2National forewordThis British Standard is the UK implementation of EN ISO 216:2007. It supersedes BS EN ISO 216:2001 which is withdrawn.The UK participation in its preparation was entrusted to Technical Committee PAI/11, Methods of test for paper, board and pulps.A list of organizations repr

4、esented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application.Compliance with a British Standard cannot confer immunity from legal obligations.Amendments

5、/corrigenda issued since publicationDate CommentsEUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN ISO 216September 2007ICS 85.080.10 Supersedes EN ISO 216:2001 English VersionWriting paper and certain classes of printed matter - Trimmedsizes - A and B series, and indication of machine direction (IS

6、O216:2007)Papiers crire et certaines catgories dimprims -Formats finis - Sries A et B, et indication du sens machine(ISO 216:2007)Schreibpapier und bestimmte Gruppen von Drucksachen -Endformate - A- und B-Reihen und Kennzeichnung derMaschinenlaufrichtung (ISO 216:2007)This European Standard was appr

7、oved by CEN on 8 September 2007.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national

8、standards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notifie

9、d to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, N

10、etherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMIT EUROPEN DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNGManagement Centre: rue de Stassart, 36 B-1050 Brussels 2007 CEN All rights of exploitation

11、 in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN ISO 216:2007: EForeword This document (EN ISO 216:2007) has been prepared by Technical Committee ISO/TC 6 “Paper, board and pulps“ in collaboration with Technical Committee CEN/TC 172 “Pulp, paper and board“, the se

12、cretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by March 2008, and conflicting national standards shall be withdrawn at the latest by March 2008. This document supe

13、rsedes EN ISO 216:2001. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, I

14、celand, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Endorsement notice The text of ISO 216:2007 has been approved by CEN as a EN ISO 216:2007 without any modification. BS

15、EN ISO 216:2007Reference numberISO 216:2007(E)INTERNATIONAL STANDARD ISO216Second edition2007-09-15Writing paper and certain classes of printed matter Trimmed sizes A and B series, and indication of machine direction Papiers crire et certaines catgories dimprims Formats finis Sries A et B, et indica

16、tion du sens machine BS EN ISO 216:2007ii iiiContents Page Foreword iv 1 Scope 1 2 Normative references 1 3 Terms and definitions .1 4 Underlying principles 2 5 Designation of trimmed sizes and machine direction .4 6 Trimmed sizes5 7 Tolerances 6 Annex A (informative) Examples of use of ISO sizes 8

17、Bibliography 9 BS EN ISO 216:2007iv Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body i

18、nterested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechn

19、ical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft International Standards adopted by th

20、e technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights

21、. ISO shall not be held responsible for identifying any or all such patent rights. ISO 216 was prepared by Technical Committee ISO/TC 6, Paper, board and pulps. This second edition cancels and replaces the first edition (ISO 216:1975), which has been technically revised. The principal change is the

22、addition of a method for the indication of the machine direction. BS EN ISO 216:20071Writing paper and certain classes of printed matter Trimmed sizes A and B series, and indication of machine direction 1 Scope This International Standard specifies the trimmed sizes of writing paper and certain clas

23、ses of printed matter. It applies to trimmed sizes of paper for administrative, commercial and technical use, and also to certain classes of printed matter, such as forms, catalogues, etc. It does not necessarily apply to newspapers, published books, posters or other special items which may be the s

24、ubject of separate International Standards. This International Standard also specifies the method for the indication of the machine direction for trimmed sheets. NOTE In some countries, particularly in North America, different sizes of cut-size office papers are commonly used. For these paper sizes,

25、 refer to Reference 1 in the Bibliography. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amen

26、dments) applies. ISO 187, Paper, board and pulps Standard atmosphere for conditioning and testing and procedure for monitoring the atmosphere and conditioning of samples 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 cross direction CD direc

27、tion in the plane of a paper or board perpendicular to the machine direction 3.2 machine direction MD direction in the plane of a paper or board parallel to the direction of travel of the web on the paper or board machine 3.3 trimmed size final dimensions of a sheet of paper or board BS EN ISO 216:2

28、0072 3.4 long-grain sheet LG sheet sheet having its longest sides parallel to the machine direction 3.5 short-grain sheet SG sheet sheet having its shortest sides parallel to the machine direction 4 Underlying principles 4.1 Basic principles (regularly derived sizes) This system of paper sizes is bu

29、ilt on the following basis: each normal series (regularly derived sizes) consists of a range of sizes formed in such a manner that each size is achieved by dividing the size immediately above it into two equal parts, the division being parallel to the shorter side (the halving principle). Consequent

30、ly, the areas of two successive sizes are in the ratio 2:1 (see Figure 1). Figure 1 The halving principle All the sizes in each series are geometrically similar to one another (the principle of similarity) (see Figure 2). This requirement, combined with that explained in the preceding paragraph, giv

31、es the following equation for the sides x and y of a given size (see Figure 3): y : x = 2:1 = 1,414 (1) In other words, the ratio between the sides x and y is equal to the ratio between the side and the diagonal of a square. BS EN ISO 216:20073Figure 2 The similarity principle Figure 3 The proportio

32、nality principle 4.2 System of measurement These sizes are based on the metric system of measurement. 4.3 Main series (ISO-A series) The basic size of the A series (A0) has an area of 1 m2; the following equation therefore applies: x y = 1 m2(2) Equations (1) and (2) give the following lengths of th

33、e sides for the basic size of the A series: x = 0,841 m y = 1,189 m The main series of sizes is arrived at by taking the basic size described above and applying the principles explained in 4.1. This series is designated the ISO-A series. BS EN ISO 216:20074 4.4 Subsidiary series (ISO-B series) A sub

34、sidiary series of sizes is obtained by placing the geometrical means between adjacent sizes of the A series in sequence. This series is designated the ISO-B series. 4.5 Long sizes (specially derived) Long sizes are obtained by dividing any appropriate regularly derived sizes from the two series prev

35、iously mentioned into 3, 4 or 8 equal parts, parallel with the shorter side, in such a manner that the ratio between the longer and the shorter side is greater than 2. 5 Designation of trimmed sizes and machine direction 5.1 Main and subsidiary series Each trimmed size in the main and the subsidiary

36、 series is designated by a letter followed by a number. The letter (A or B) indicates the series of sizes, and the number indicates the number of divisions that have been made (according to the rules of 4.1), starting from the basic size which has been given the number 0. 5.2 Indication of machine d

37、irection For the purposes of identifying the machine direction, the sheets dimensions shall be expressed in millimetres, such as 594 mm 841 mm. The second dimension shall be that which is parallel to the machine direction. In addition, if the sheet is long grain, having its longest sides parallel to

38、 the machine direction, then the notation LG may be added to its identification. If the sheet is manufactured with its shortest sides parallel to the direction of machine travel, the notation SG may be added. For example, a short-grain sheet with dimensions 297 mm 210 mm may be identified as 297 mm

39、210 mm SG. Alternatively, sheets may be identified through the use of the ISO designation as shown in Table 1 and Table 2. For example, a short-grain sheet measuring 594 mm 420 mm may be identified as A2 SG. 5.3 Trimmed long sizes Trimmed long sizes are designated by the original size preceded by th

40、e fraction into which it has been divided. The machine direction of trimmed long sizes is identified in the same manner as for the main and subsidiary series. For example, 1/4 A4 SG is derived from size A4 LG divided into four equal parts parallel to the 210 mm side as described in 4.5. The 1/4 A4 S

41、G sheet may also be identified as 210 mm 74 mm SG. BS EN ISO 216:200756 Trimmed sizes 6.1 Main series of trimmed sizes (ISO-A series) The trimmed sizes of the A series are intended for all kinds of stationery and printed matter as specified in Clause 1. These sizes are as follows: Table 1 Main serie

42、s of trimmed sizes (ISO-A series) Designation Dimensions mm A0 841 1 189 A1 594 841 A2 420 594 A3 297 420 A4 210 297 A5 148 210 A6 105 148 A7 74 105 A8 52 74 A9 37 52 A10 26 37 NOTE The rarely used sizes which follow also belong to this series: 4A0 1 682 2 378 2A0 1 189 1 682 6.2 Subsidiary series o

43、f trimmed sizes (ISO-B series) The trimmed sizes of the B series are intended for use only in exceptional circumstances, when sizes are needed intermediate between any two adjacent sizes of the A series. These sizes are as follows: Table 2 Subsidiary series of trimmed sizes (ISO-B series) Designatio

44、n Dimensions mm B0 1 000 1 414 B1 707 1 000 B2 500 707 B3 353 500 B4 250 353 B5 176 250 B6 125 176 B7 88 125 B8 62 88 B9 44 62 B10 31 44 BS EN ISO 216:20076 6.3 ISO trimmed long sizes As far as possible, trimmed long sizes shall be produced from the regularly derived sizes of the A series (see Table

45、 3 and Figure 4). They are used for labels, tickets and certain other purposes. Table 3 Examples of ISO trimmed long sizes Designation Dimensions mm 1/3 A4 99 210 1/4 A4 74 210 1/8 A7 13 74 Dimensions in millimetres Figure 4 Example of trimmed long sizes (1/4 A4) derived from the size A4 7 Tolerance

46、s 7.1 Permissible tolerances For the purposes of this International Standard, the tolerance for a given sheet size is the range outside of which a sheet cannot be regarded as being of a given size. This tolerance differs from a manufacturing or process tolerance. The process tolerance depends on the

47、 sheet usage, and is likely to be more stringent than the range given within this International Standard; manufacturing tolerances should be agreed individually between trading partners. Unless closer tolerances are specified at the time of ordering, the permissible tolerances on the dimensions are

48、as follows: a) for dimensions u 150 mm: upper limit +1,5 mm lower limit 1,5 mm BS EN ISO 216:20077b) for dimensions 150 mm but u 600 mm: upper limit +2 mm lower limit 2 mm c) for dimensions 600 mm: upper limit +3 mm lower limit 3 mm 7.2 Measurement conditions The dimensions shall be measured under t

49、he standard atmosphere for testing specified in ISO 187. BS EN ISO 216:20078 Annex A (informative) Examples of use of ISO sizes Size A3 This size, flat or folded to size A4, is intended for large tables, charts or diagrams for official or commercial use, when size A4 is found to be too small. Size A4 This size is primarily intended for use as the standard size for paper for correspondence and printed matter for official or commercial use. It is further i