EN 62680-2-3-2015 en Universal Serial Bus interfaces for data and power - Part 2-3 Universal Serial Bus Cables and Connectors Class Document Revision 2 0 (TA 14).pdf

《EN 62680-2-3-2015 en Universal Serial Bus interfaces for data and power - Part 2-3 Universal Serial Bus Cables and Connectors Class Document Revision 2 0 (TA 14).pdf》由会员分享，可在线阅读，更多相关《EN 62680-2-3-2015 en Universal Serial Bus interfaces for data and power - Part 2-3 Universal Serial Bus Cables and Connectors Class Document Revision 2 0 (TA 14).pdf（50页珍藏版）》请在麦多课文档分享上搜索。

1、BSI Standards PublicationUniversal Serial Bus interfaces for data and powerPart 23: Universal Serial Bus Cables andConnectors Class Document Revision 2.0(TA 14)BS EN 62680-2-3:2015National forewordThis British Standard is the UK implementation of EN 62680-2-3:2015. It isidentical to IEC 62680-2-3:20

2、15.The UK participation in its preparation was entrusted to TechnicalCommittee EPL/100, Audio, video and multimedia systems and equipment.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary pr

3、ovisions ofa contract. Users are responsible for its correct application. The British Standards Institution 2016.Published by BSI Standards Limited 2016ISBN 978 0 580 88001 8ICS 29.220; 33.120; 35.200Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standar

4、d was published under the authority of theStandards Policy and Strategy Committee on 31 January 2016.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 62680-2-3:2015EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 62680-2-3 December 2015 ICS 29.220; 33.120; 35

5、.200 English Version Universal Serial Bus interfaces for data and power - Part 2-3: Universal Serial Bus Cables and Connectors Class Document, Revision 2.0 (TA 14) (IEC 62680-2-3:2015) Interfaces de bus universel en srie pour les donnes et lalimentation lectrique - Partie 2-3 : cbles et connecteurs

6、USB, document de classe, rvision 2.0 (TA 14) (IEC 62680-2-3:2015) Schnittstellen des Universellen Seriellen Busses fr Daten und Energie - Teil 2-3: Klasse fr Kabel und Steckverbinder des Universellen Seriellen Busses, berarbeitung 2.0 (IEC 62680-2-3:2015) This European Standard was approved by CENEL

7、EC on 2015-10-14. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standard

8、s may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language a

9、nd notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Ge

10、rmany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisa

11、tion Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2015 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 62680-2-3:2015 E BS EN 62680-2-3:2015EN 626

12、80-2-3:2015 2 European foreword The text of document 100/2333/CDV, future edition 1 of IEC 62680-2-3, prepared by Technical Area 14 “Interfaces and methods of measurement for personal computing equipment“ of IEC/TC 100 “Audio, video and multimedia systems and equipment“ was submitted to the IEC-CENE

13、LEC parallel vote and approved by CENELEC as EN 62680-2-3:2015. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2016-07-14 latest date by which the national standards con

14、flicting with the document have to be withdrawn (dow) 2018-10-14 Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. Endorsement notice Th

15、e text of the International Standard IEC 62680-2-3:2015 was approved by CENELEC as a European Standard without any modification. BS EN 62680-2-3:2015 2 IEC 62680-2-3:2015 IEC 2015 USB-IF 2014 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ UNIVERSAL SERIAL BUS INTERFACES FOR DATA AND POWER Part 2-3: Uni

16、versal Serial Bus Cables and Connectors Class Document Revision 2.0 FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote internati

17、onal co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter re

18、ferred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate

19、in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an intern

20、ational consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasona

21、ble efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC P

22、ublications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformi

23、ty. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication

24、. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for

25、 costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct ap

26、plication of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 62680-2-3 has been prepared by te

27、chnical area 14: Interfaces and methods of measurement for personal computing equipment, of IEC technical committee 100: Audio, video and multimedia systems and equipment. The text of this standard is based on documents prepared by the USB Implementers Forum (USB-IF). The structure and editorial rul

28、es used in this publication reflect the practice of the organization which submitted it. BS EN 62680-2-3:2015IEC 62680-2-3:2015 IEC 2015 3 USB-IF 2014 The text of this standard is based on the following documents: CDV Report on voting 100/2333/CDV 100/2436/RVC Full information on the voting for the

29、approval of this standard can be found in the report on voting indicated in the above table. A list of all the parts in the IEC 62680 series, published under the general title Universal serial bus interfaces for data and power can be found on the IEC website. This publication has been drafted in acc

30、ordance with the ISO/IEC Directives, Part 2. The committee has decided that the contents of this publication will remain unchanged until the stability date indicated on the IEC website under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will b

31、e reconfirmed, withdrawn, replaced by a revised edition, or amended. A bilingual version of this publication may be issued at a later date. IMPORTANT The colour inside logo on the cover page of this publication indicates that it contains colours which are considered to be useful for the correct unde

32、rstanding of its contents. Users should therefore print this document using a colour printer. BS EN 62680-2-3:2015 4 IEC 62680-2-3:2015 IEC 2015 USB-IF 2014 INTRODUCTION The IEC 62680 series is based on a series of specifications that were originally developed by the USB Implementers Forum (USB-IF).

33、 These specifications were to submitted to the IEC under the auspices of a special agreement between the IEC and the USB IF. The USB Implementers Forum, Inc.(USB-IF) is a non-profit corporation founded by the group of companies that developed the Universal Serial Bus specification. The USB-IF was fo

34、rmed to provide a support organization and forum for the advancement and adoption of Universal Serial Bus technology. The Forum facilitates the development of high-quality compatible USB peripherals (devices), and promotes the benefits of USB and the quality of products that have passed compliance t

35、esting. ANY USB SPECIFICATIONS ARE PROVIDED TO YOU “AS IS, “WITH NO WARRANTIES WHATSOEVER, INCLUDING ANY WARRANTY OF MERCHANTABILITY, NON-INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE. THE USB IMPLEMENTERS FORUM AND THE AUTHORS OF ANY USB SPECIFICATIONS DISCLAIM ALL LIABILITY, INCLUDING LIABIL

36、ITY FOR INFRINGEMENT OF ANY PROPRIETARY RIGHTS, RELATING TO USE OR IMPLEMENTATION OR INFORMATION IN THIS SPECIFICAITON. THE PROVISION OF ANY USB SPECIFICATIONS TO YOU DOES NOT PROVIDE YOU WITH ANY LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS. Entering in

37、to USB Adopters Agreements may, however, allow a signing company to participate in a reciprocal, royalty-free licensing arrangement for compliant products. For more information, please see: http:/www.usb.org/developers/docs/ http:/www.usb.org/developers/devclass_docs#approved IEC DOES NOT TAKE ANY P

38、OSITION AS TO WHETHER IT IS ADVISABLE FOR YOU TO ENTER INTO ANY USB ADOPTERS AGREEMENTS OR TO PARTICIPATE IN THE USB IMPLEMENTERS FORUM.” This series covers the Universal Series Bus interfaces for data and power and consists of the following parts: IEC 62680-1-1, Universal Serial Bus interfaces for

39、data and power Part 1-1: Common components USB Battery Charging Specification, Revision 1.2 IEC 62680-2-1, Universal Serial Bus interfaces for data and power Part 2-1: Universal Serial Bus Specification, Revision 2.0 IEC 62680-2-2, Universal Serial Bus interfaces for data and power Part 2-2: USB Mic

40、ro-USB Cables and Connectors Specification, Revision 1.01 IEC 62680-2-3, Universal Serial Bus interfaces for data and power Part 2-3: Universal Serial Bus Cables and Connectors Class Document Rev. 2.0 This part of the IEC 62680 series consists of several distinct parts: the main body of the text, wh

41、ich consists of the original specification developed by the USB-IF. BS EN 62680-2-3:2015IEC 62680-2-3:2015 IEC 2015 5 USB-IF 2014 CONTENTS FOREWORD . 2 INTRODUCTION . 4 1 Introduction . 11 1.1 Purpose 11 1.2 Scope . 11 1.3 Related Documents . 11 1.4 Terms and Abbreviations 12 2 Management Overview 1

42、3 3 USB Electrical, Mechanical and Environmental Compliance Standards 13 4 Acceptance Criteria, Test Methods and Test Procedures . 17 4.1 Integrators List (IL) . 17 4.2 USB Logo Usage 17 4.3 Compliance Test Report 17 4.4 Connector and Cable Assembly Physical Certification . 17 4.5 General Informatio

43、n 18 4.5.1 Mated Pairs . 18 4.5.2 Before Testing . 18 4.5.3 Test Sequences . 18 4.6 Sample Selection 18 4.7 USB Compliance Testing Interval 18 4.8 Primary Qualification Approval Testing 19 4.9 Sustaining Qualification Approval Testing . 19 4.10 Compliance Test Sequences . 19 4.10.1 Inspection EIA 36

44、4-18 . 19 4.10.2 Test Group 1 21 4.10.3 Test Group 2 22 4.10.4 Test Group 3 23 4.10.5 Test Group 4 24 4.10.6 Test Group 5 25 4.10.7 Test Group 6 25 4.10.8 Test Group 7 26 4.10.9 Test Group 8 27 5 Certification Acceptance and Submission 27 5.1 Compliance Test Report 28 5.2 Listing, Authorization and

45、Notification . 28 5.2.1 Listing . 28 5.2.2 Authorization to use Certified USB Logo 28 5.2.3 Notification 28 Appendices . 29 Figure 4-1 Typical Contact Resistance Measurement . 22 Table 3-1 Electrical, Mechanical and Environmental Compliance Standards 14 Table 4-1 Test Conditions 18 Table 4-2 Perform

46、ance Levels . 18 BS EN 62680-2-3:2015 6 IEC 62680-2-3:2015 IEC 2015 USB-IF 2014 Table 4-3 Primary Qualification Approval Testing . 19 Table 4-4 Test Group 1 Durability, Vibration, Shock, Cable Retention and Mating/Un-mating Force 21 Table 4-5 Group 2 Temperature Life . 22 Table 4-6 Test Group 3 Mixe

47、d Flowing Gas 23 Table 4-7 Test Group 4 Insulation Resistance, Dielectric Withstanding Voltage, Thermal Shock biological; chemical; construction materials; electrical; environmental; geotechnical; mechanical; calibration; and, nondestructive and thermal. ANSI American National Standards Institute Ap

48、proved Integrators List (AIL) A listing available to USB-IF member companies at http:/www.usb.org listing cable and connector products that have successfully completed a Voluntary Compliance Testing program conducted in accordance with the most current version of the USB Specifications Electrical, M

49、echanical and Environmental Performance Standards as shown in Chapter 6, Chapter 7 and this document. ASTM American Society for Testing and Materials. ASUPS The acronym for Application Specific USB Product Specification. An ASUPS describes the unique characteristics of a special purpose nonstandard USB connector or cable assembly specification. C of C Certificate of Compliance. Characteristic A physical, chemical, visual or any other meas