EN 61334-4-512-2002 en Distribution Automation Using Distribution Line Carrier Systems Part 4-512 Data Communication Protocols - System Management Using Profile 61334-5-1 - Managem.pdf

《EN 61334-4-512-2002 en Distribution Automation Using Distribution Line Carrier Systems Part 4-512 Data Communication Protocols - System Management Using Profile 61334-5-1 - Managem.pdf》由会员分享，可在线阅读，更多相关《EN 61334-4-512-2002 en Distribution Automation Using Distribution Line Carrier Systems Part 4-512 Data Communication Protocols - System Management Using Profile 61334-5-1 - Managem.pdf（28页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD Distribution automation using distribution line carrier systems Part 4-5 12: Data communication protocols -System management using profile 6 1334-5-1 -Management Information Base (MIB) The European Standard EN 613344-512:2002 has the status ofa British Standard ICs 33.200 BS EN IEC

2、61 334-4-5 1212002 6 1 334-4-5 121200 1 BS EN 613344-51212002 Amd. No. National foreword Date Comments This British Standard, having been prepared under the direction of the Electrotechnical Sector Policy and Strategy Committee, was published under the authority of the Standards Policy and Strategy

3、Committee on 19 April 2002 This British Standard is the official English language version of EN 613344-512:2002. It is identical with IEC 613344-512:2001. The UKparticipation in its preparation was entrusted to Technical Committee PEL/57, Power system control and associated communications, which has

4、 the responsibility to: - - aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them

5、in the UK. - A list of organizations represented on this committee can be obtained on request to its secretary. From 1 January 1997, all IEC publications have the number 60000 added to the old number. For instance, IEC 27-1 has been renumbered as IEC 60027-1. For a period oftime during the change ov

6、er from one numbering system to the other, publications may contain identifiers from both systems. Cr oss-r e fer enc e s The British Standards which implement international or European publications referred to in this document may be found in the BSI Standards Catalogue under the section entitled ?

7、International Standards Correspondence Index?, or by using the ?Find? facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance wi

8、th a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 25 and a back cover. The BSI copyright date displayed in this document indicates when the document was last is

9、sued. O BSI 19 April 2002 ISBN O 580 39445 X EUROPEAN STANDARD EN 61 334-4-51 2 NORME EUROPENNE EUROPISCHE NORM Februarv 2002 ICs 33.200 English version Distri bution automation using distri bution line carrier systems Part 4-512: Data communication protocols - System management using profile 61 334

10、-5-1 - Management Information Base (MIB) (IEC 61334-4-512:2001) Automatisation de la distribution laide de systmes de communication courants porteurs Partie 4-512: Protocoles de communication de donnes - Administration de systmes laide du profil 61334-5-1 - MIB (Base dl nformations dAdministration)

11、(CE1 61 334-4-512:2001) Verteilungsautomatisierung mit Hilfe von Trgersystemen auf Verteilungsleitungen Teil 4-51 2: Daten kommuni kations- protokolle - Systemverwaltung bei Anwendung des Profils nach IEC 61334-5-1 - Management-I nformationsbasis (MI B) (I EC 6 1 334-4-51 2 1200 1 ) This European St

12、andard was approved by CENELEC on 2002-02-01. CENELEC members are bound to comply with the CENKENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concer

13、ning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into i

14、ts own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands,

15、Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B - 1050 Brussels O 2002 CENELEC

16、- All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 61334-4-512:2002 E Page 2 EN 61334-4-5122002 Foreword The text of document 57/544/FDIS, future edition 1 of IEC 61334-4-512, prepared by IEC TC 57, Power system control and associated commun

17、ications, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 61334-4-512 on 2002-02-01. The following dates were fixed: - latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement - latest date

18、 by which the national standards conflicting with the EN have to be withdrawn Annexes designated “normative“ are part of the body of the standard. In this standard, annex ZA is normative. Annex ZA has been added by CENELEC. (dop) 2002-1 1-01 (dow) 2005-02-01 Endorsement not i ce The text of the Inte

19、rnational Standard IEC 61334-4-512:2001 was approved by CENELEC as a European Standard without any modification. O BSI 19 April 2002 Page 3 EN 61334-4-5122002 CONTENTS Scope . . 4 Norm at ive references . 4 Definitions . . 5 Abbreviations Management Information Base (MIB) . 5.2 5.3 5.4 5.5 5.6 5.1 G

20、eneral types definition . 9 MIB objects linked to Ph MIB objects linked to MAC Management Variables . 11 MIB objects linked to LLC Management Variables 14 MIB objects linked to ACSE Management Variables 15 MIB objects linked to Application Management Variables 16 5.7 MIB System Objects . 17 5.8 Othe

21、r MIB Objects . 17 5.9 Summary . . .22 Annex ZA (normative) Normative references to international publications with their corresponding European publications 25 O BSI 19 April 2002 Page 4 EN 61334-4-5122002 DISTRIBUTION AUTOMATION USING DISTRIBUTION LINE CARRIER SYSTEMS - Part 4-512: Data communicat

22、ion protocols - System management using profile 61 334-5-1 - Management Information Base (MIB) 1 Scope This part of IEC 61334 specifies the DCP Management Information Base (MIB). This MIB is used for the management of the communication profile defined by the following standards: IEC 61334-5-1 (Physi

23、cal and MAC sublayer), IEC 61334-4-32 (LLC sublayer), IEC 61334-4-42 (Application protocols), and IEC 61334-4-41 (DLMS). 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated

24、 references, the latest edition of the referenced document (including any amendments) applies. IEC 61 334-4-1 : 1996, Disfribufion aufomafion using disfribufion line carrier sysfems - Parf 4: Dafa communicafion profocols - Secfion 1: Reference model of fhe communicafion sysfem IEC 61 334-4-32:1996,

25、Disfribufion aufomafion using disfribufion line carrier sysfems - Parf 4: Dafa communicafion profocols - Secfion 32: Dafa link layer - Logical link confrol (LLC) IEC 61 334-4-41 :I 996, Disfribufion aufomafion using disfribufion line carrier sysfems - Parf 4: Dafa communicafion profocols - Secfion 4

26、 1: Applicafion profocols - Disfribufion line message sp ecifica fion IEC 61 334-4-42:1996, Disfribufion aufomafion using disfribufion line carrier sysfems - Parf 4: Dafa communicafion profocols - Secfion 42: Applicafion profocols - Applicafion layer IEC 61 334-4-51 1 :2000, Disfribufion aufomafion

27、using disfribufion line carrier sysfems - Parf 4-51 1: Dafa communicafion profocols - Sysfems managemenf - CIASE profocol IEC 61 334-5-1 :2001, Disfribufion aufomafion using disfribufion line carrier sysfems - Parf 5-1: Lower layer profiles - The spread frequency shiff keying (S-FSK) profile ISO/IEC

28、 7498-1 :I 994, Informafion fechnology - Open Sysfems Inferconnecfion - Basic Reference Model - Parf 1: The Basic Model ISO/IEC 7498-3: 1997, Informafion fechnology - Open Sysfems Inferconnecfion - Basic Reference Model - Parf 3: Naming and addressing ISO/IEC 7498-4: 1989, Informafion fechnology - O

29、pen Sysfems Inferconnecfion - Basic Reference Model - Parf 4: Managemenf framework ISO/IEC 8509: 1987, Informafion processing sysfems - Open Sysfems Inferconnecfion - Service convenfions ISO/IEC 9545: 1994, Informafion fechnology - Open Sysfems Inferconnecfion - Applicafion Layer sfrucfure O BSI 19

30、April 2002 Page 5 EN 61334-4-5122002 3 Definitions For the purpose of this part of IEC 61334, the following terms as defined in ISO/IEC 7498-1, IEC 61334-4-42 and IEC 61334-4-51 1 and the additional definition apply. ISO/IEC 7498-3, ISOAEC 7498-4, ISOAEC 8509, ISOAEC 9545, IEC 61334-4-1, IEC 61334-4

31、-41, 3.1 ISO/I EC 7498 a) open system, b) application-process, c) (N)-layer, d) (N)-sublayer, e) (N)-service, f) (N)-service-access-point, g) (N)-protocol, h) (N)-protocol-data-unit, i) (N)-service-data-unit, j ) k) application-entity, I) application-service-element, m) user-element. systems- m a na

32、ge m en t , 3.2 ISOAEC 7498-3 a) (N)-address, b) (N)-selector, c) (N)-association, d) (N)-directory-function, e) (N)-entity, f) (N)-entity-title, g) system-title. 3.3 ISOAEC 7498-4 a) Systems m a nage m en t a p p I cat ion-e nt i ty , b) OS1 Management, c) Management Object, d) Management Informati

33、on Base. O BSI 19 April 2002 Page 6 EN 61334-4-5122002 3.4 ISO/IEC 8509 a) primitive, b) request, c) indication, d) response, e) confirm. 3.5 ISO/IEC 9545 a) application-context. 3.6 IEC 61334-4-1 a) NEW-address, b) AIISMAE-Title. 3.7 IEC 61334-4-41 a) client, b) server, c) Virtual Distribution Equi

34、pment (VDE). 3.8 IEC 61334-4-42 a) application context. 3.9 IEC 61334-4-511 a) initiator, b) active initiator, c) new/authorized systems, d) manager, e) new system, f) new system title, g) registered system, h) reporting system, i) system. 3.10 application-identifier identifies an application in a s

35、ystem. Two applications associated with the same VDE-type attribute cannot have the same application-identifier. O BSI 19 April 2002 Page 7 EN 61334-4-5122002 4 Abbreviations ACSE ASE CIASE DASE DCP DLMS I EC IS0 LLC L-SAP MAC MIB os1 OSIE PDU SAP SDU SMAE VDE Association Control Service Element App

36、lication Service Element Conf ig Urat ion I nit at ion AS E DLMS Application Service Element Data Communication Protocols Distribution Line Message Specification International Electrotechnical Commission International Organization for Standardization Logical Link Control Link Service Access Point Me

37、dium Access Control Management Information Base Open Systems Interconnection Open Systems Interconnection Environment Protocol Data Unit Service Access Point Service Data Unit Systems Management Application Entity Virtual Distribution Equipment The following initials are used to specify the layers o

38、r sublayers: a) PHY - Physical layer, b) DL - Data-Link layer, c) MA - MAC sublayer, d) L - LLC sublayer, e) CI - CIASE sublayer (Application layer). O BSI 19 April 2002 Page 8 EN 61334-4-5122002 5 Management Information Base (MIB) This standard provides a selection of DLMS objects gathered together

39、 in a so-called Management Information Base (MIB). This selection corresponds to a set of variables that are used for the management of the PLAN (Power Line Automation Network) profile. This profile is based on IEC 61334-5-1 (physical layer and MAC sublayer), IEC 61334-4-32 (LLC sublayer), IEC 61 33

40、4-4-42 (Application protocols), IEC 61 334-4-51 1 (CIASE protocol) and IEC 61 334-4-41 (DLMS) standards. From a DLMS point of view, an MIB is associated with a specific VDE called the ”Management VDE“. Characferisfics of fhe Managemenf VDE: The Management VDE is accessible from the LLC sublayer thro

41、ugh an SAP equal to O. The conformance block characteristics of this VDE are described in IEC 61334-4-51 1. The VDE type is O. The resources attribute of the VDE is associated with the Visible String: PLAN MIB 1 .O. The DLMS view of the MIB leads to consider mainly management Named Variable Objects.

42、 The types of the objects that are involved in the systems interoperability are defined in a DLMS objects description way. The Named Variable Objects are sorted according to the communication layer to which they are mainly bound. The present clause describes the objects parameters, the specific type

43、 of the named variable described and any remarks on their use. A DLMS name space from O to 4095 (in decimal notation) is reserved for extensions of standardized Management Objects. Specific manufacturer objects can be added to the Management VDE provided that their names are greater than 4096 (in de

44、cimal notation). The present MIB is designed to facilitate implementation in very simple devices. It is also anticipated that DLMS will exchange information based on other standardized MIB definitions. For example, SNMP RMON (Internet RFC 1757: “Remote Network Monitoring Management Information Base”

45、, February 1995) is a widely applied set of definitions supported in many network protocols for remote management. Since the name space of DLMS is constrained, mapping to this large data structure would consume too much of the limited name space. It can therefore be accomplished through the definiti

46、on of a single Named Variable Object of type STRUCTURE, and, Detailed Access would be used to navigate the structure to its individual components. The name 4088 (in decimal notation) is reserved for the future definition of SNMPs RMON MIB. The Named Variable Objects from 4032 to 4080 are similarly r

47、eserved for definition of other MIBs including CMIS/CMIP based MIBs. O BSI 19 April 2002 Page 9 EN 61334-4-5122002 5.1 General types definition 5.1.1 Structure The DCP Systems Management uses the same types as DLMS (see IEC 61334-4-41, 10.2 for further details). However, there is a need for a specia

48、l type “list”. The DCP System Management uses the existing type “array” where the type “list” is needed. The type “array” for that purpose has a special characteristic; .e. it has a maximum size and a variable number of elements. Table 1 - Type Description argument Type Description I Code Kind of Ty

49、pe Array-list Maximum number of Elements Type Description Structure List of Type Description Simple Class A type is described by a recursively specified argument. This argument describes a branching tree, called a type tree. The leaves of this tree are the simple data elements of the variable described by the type. If a type describes a complex variable, then the type tree will have one or more non-leaf nodes, each of which represents a complex type constructed from the possible complex types represented by the subordinate nodes of the type tree. 5.1.2 Argume