EN 61138-2007 en Cables for portable earthing and short-circuiting equipment《便携式接地和短路设备用电缆》.pdf

《EN 61138-2007 en Cables for portable earthing and short-circuiting equipment《便携式接地和短路设备用电缆》.pdf》由会员分享，可在线阅读，更多相关《EN 61138-2007 en Cables for portable earthing and short-circuiting equipment《便携式接地和短路设备用电缆》.pdf（24页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARDBS EN 61138:2007Cables for portable earthing and short-circuiting equipmentg49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58ICS 29.06

2、0.20BS EN 61138:2007This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 January 2008 BSI 2008ISBN 978 0 580 55044 7National forewordThis British Standard is the UK implementation of EN 61138:2007. It was derived by CENELEC from IEC 61138:2007.

3、 It supersedes BS EN 61138:1998 which is withdrawn.The CENELEC common modifications have been implemented at the appropriate places in the text and are indicated by tags (e.g. ).The UK participation in its preparation was entrusted by Technical Committee GEL/20, Electric cables, to Subcommittee GEL/

4、20/17, Low voltage cables.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application.Compliance with a British Standard ca

5、nnot confer immunity from legal obligations.Amendments/corrigenda issued since publicationDate CommentsEUROPEAN STANDARD EN 61138 NORME EUROPENNE EUROPISCHE NORM December 2007 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches

6、Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B - 1050 Brussels 2007 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 61138:2007 E ICS 29.060.20 Supersedes EN 61138:1997 + A11:2003English version Cab

7、les for portable earthing and short-circuiting equipment (IEC 61138:2007, modified) Cbles dquipements portables de mise la terre et de court-circuit (CEI 61138:2007, modifie) Leitungen fr ortsvernderliche Erdungs- und Kurzschlie-Einrichtungen (IEC 61138:2007, modifiziert) This European Standard was

8、approved by CENELEC on 2007-10-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such

9、national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own lan

10、guage and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, La

11、tvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Foreword The text of document 20/881/FDIS, future edition 3 of IEC 61138, prepared by IEC TC 20, Electric cables, was submitted to the IEC-CE

12、NELEC parallel vote. A draft amendment containing common modifications to the future IEC 61138 was prepared by the Technical Committee CENELEC TC 20, Electric cables, and was submitted to formal vote. The combined text was approved by CENELEC as EN 61138 on 2007-10-01. This European Standard superse

13、des EN 61138:1997 + A11:2003. The significant technical changes with respect to EN 61138:1997 are as follows: extension of the scope to cover silicone rubber as an insulation material; introduction of a new normative annex for clashing test. The following dates were fixed: latest date by which the E

14、N has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2008-10-01 latest date by which the national standards conflicting with the EN have to be withdrawn (dow) 2009-10-01 Annex ZA has been added by CENELEC. _ Endorsement notice The text of

15、 the International Standard IEC 61138:2007 was approved by CENELEC as a European Standard with agreed common modifications. EN 61138:2007 2 CONTENTS 1 Scope 5 2 Normative references .5 3 Terms and definitions .6 4 General requirements for the construction of cables 7 4.1 Conductors7 4.1.1 Material .

16、7 4.1.2 Construction 7 4.1.3 Check of construction.7 4.1.4 Electrical resistance.7 4.2 Separator between conductor and insulation 7 4.3 Insulation 7 4.3.1 Material .7 4.3.2 Colour of insulation 8 4.3.3 Application to the conductor .8 4.3.4 Thickness 8 4.3.5 Mechanical properties before and after age

17、ing8 4.4 Marking .8 4.4.1 Indication of origin .8 4.4.2 Indication of code designation and cross-sectional area of the conductor.8 4.4.3 Continuity of marks 9 4.4.4 Durability .9 4.4.5 Legibility9 5 Tests on completed cables .9 5.1 Electrical properties.9 5.1.1 General .9 5.1.2 Voltage test .9 5.1.3

18、 Spark test 9 5.2 Overall diameter 10 5.3 Flexibility test 10 5.3.1 General .10 5.3.2 Test for cables with copper conductors.10 5.3.3 Test for cables with aluminium conductors11 5.4 Optional clashing test 12 6 Particular specifications12 6.1 General .12 6.2 Code designation.12 6.3 Rated voltage 12 6

19、.4 Construction12 6.4.1 Conductors 12 6.4.2 Insulation.12 6.4.3 Overall diameter 13 6.5 Tests.13 7 Guide to the use of the cables 13 EN 61138:2007 3 Annex A (normative) Clashing test .17 Annex ZA (normative) Normative references to international publications with their corresponding European publica

20、tions19 Figure 1 Flexing apparatus.11 Figure A.1 Impact test apparatus (vertical impact) 18 Table 1 Requirement for test voltages 10 Table 2 Requirements for the static flexibility test .11 Table 3 General data for Type 61138 IEC 60110, and types H00V-D, H003V-D, H00S-D.13 Table 4 General data for T

21、ype 61138 IEC 60210, and types H00V-AD, H003V-AD, H00S-AD14Table 5 Tests for Types 61138 IEC 60110 and 60210 (EPR insulation) .14 Table 6 Tests for types H00V-D, H00V-AD, H00V3-D and H00V3-AD (PVC insulation) 15 Table 7 deletedTable 8 Tests for types H00S-D and H00S-AD (SiR insulation).16 Table 9 de

22、letedTable A.1 Height of fall 17 EN 61138:2007 4 CABLES FOR PORTABLE EARTHING AND SHORT-CIRCUITING EQUIPMENT 1 Scope This International Standard applies to flexible cables with insulation based on ethylene propylene rubber (EPR), polyvinyl chloride (PVC) or silicone rubber (SiR) for portable earthin

23、g and short-circuiting equipment. For this type of cable no rated voltage is given as such cables are exclusively intended for earthing and short-circuiting equipment. The particular types of cable and their code designations are specified in Clause 6 of this standard. The test methods specified in

24、this standard are given in EN 50395, EN 50396, IEC 60811 and IEC 62230. NOTE In addition to the requirements given in this standard, mechanical requirements and requirements for the marking for the complete equipment should be taken into account. These requirements can be found in IEC 61230. 2 Norma

25、tive references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE One or more references to th

26、e standard below are in respect of a specific subdivision of that standard, for instance a clause, a table, a class or a type. Cross-references to these standards are undated and, at all times, the latest version should be applied. EN 50363-2-1, Insulating, sheathing and covering materials for low v

27、oltage energy cables Part 2-1: Cross-linked elastomeric sheathing compounds EN 50363-4-1, Insulating, sheathing and covering materials for low voltage energy cables Part 4-1: PVC sheathing compounds EN 50395, Electrical test methods for low voltage energy cables EN 50396, Non-electrical test methods

28、 for low voltage energy cables IEC 60228, Conductors of insulated cables IEC 60502-1, Extruded solid dielectric insulated power cables for rated voltages from 1 kV up to 30 kV IEC 60811-1-1, Common test methods for insulating and sheathing materials of electric and optical cables Part 1-1: Methods f

29、or general application Measurement of thickness and overall dimensions Tests for determining the mechanical properties IEC 60811-1-2, Common test methods for insulating and sheathing materials of electric and optical cables Part 1-2: Methods for general application Thermal ageing methods EN 61138:20

30、07 5 Text deletedIEC 60811-1-3, Common test methods for insulating and sheathing materials of electric and optical cables Part 1-3: Methods for general application Methods for determining the density Water absorption tests Shrinkage test IEC 60811-1-4, Common test methods for insulating and sheathin

31、g materials of electric and optical cables Part 1-4: Methods for general application Tests at low temperature IEC 60811-2-1, Common test methods for insulating and sheathing materials of electric and optical cables Part 2-1: Methods specific to elastomeric compounds Ozone resistance, hot set and min

32、eral oil immersion tests IEC 60811-3-1, Common test methods for insulating and sheathing materials of electric and optical cables Part 3-1: Methods specific to PVC compounds Pressure test at high temperature Tests for resistance to cracking IEC 60811-3-2, Common test methods for insulating and sheat

33、hing materials of electric and optical cables Part 3-2: Methods specific to PVC compounds Loss of mass test Thermal stability test IEC 61230, Live working Portable equipment for earthing or earthing and short-circuiting IEC 62230, Electrical cables Spark-test method 3 Terms and definitions For the p

34、urposes of this document, the following definitions apply. 3.1 type tests symbol T tests required to be made before supplying a type of cable covered by this standard on a general commercial basis in order to demonstrate satisfactory performance characteristics to meet the intended application NOTE

35、These tests are of such a nature that, after they have been made, they need not be repeated unless changes are made in the cable materials, design or type of manufacturing process which might change the performance characteristics. 3.2 sample tests symbol S tests made on samples of completed cable,

36、or components taken from a completed cable, adequate to verify that the finished product meets the design specifications 3.3 routine tests symbol R tests made on all production cable lengths to demonstrate their integrity EN 61138:2007 6 4 General requirements for the construction of cables 4.1 Cond

37、uctors 4.1.1 Material The conductor shall consist of annealed copper, aluminium or aluminium alloy in accordance with IEC 60228. The wires of copper conductors may be plain or tinned. Tinned wires shall be covered with an effective layer of tin. 4.1.2 Construction The maximum diameter of the conduct

38、or wires is specified in Table 3 and Table 4. 4.1.3 Check of construction Compliance with the requirements of 4.1.1 and 4.1.2 shall be checked by visual inspection and by measurement. 4.1.4 Electrical resistance The d.c. resistance of copper conductors at 20 C is specified in IEC 60228 Class 6. The

39、d.c. resistance of aluminium conductors at 20 C is specified in Table 4 of this standard. The test shall be carried out in accordance with IEC 60228, Annex A. The current density shall not exceed 1 A/mm to avoid any significant increase of temperature during the test. 4.2 Separator between conductor

40、 and insulation A separating tape made of suitable material may be placed between the conductor and the insulation. 4.3 Insulation 4.3.1 Material The insulation shall be one of the following types specified for each type of cable in Clause 6: an elastomeric insulation compound based on a cross-linke

41、d ethylene propylene rubber (EPR) or similar (EPM or EPDM); a general purpose thermoplastic insulation compound based on polyvinylchloride (PVC); a cold-resistant thermoplastic insulation compound based on polyvinylchloride (PVC); a cross-linked silicone rubber insulation compound (SiR). For the req

42、uirements of these compounds, see 4.3.5. The temperature limits for cables insulated by the above compounds are given in Clause 7. EN 61138:2007 7 4.3.2 Colour of insulation There is no preferred colour for the insulation. The colour of the insulation shall be achieved by the use of coloured compoun

43、ds or other suitable method. The insulation, whether coloured or not, may be transparent. 4.3.3 Application to the conductor The insulation shall be closely applied to the conductor or separator. It shall be possible to remove the insulation without damage to the insulation itself, to the conductor,

44、 or to the tin coating if any. Compliance shall be checked by inspection and by manual test. 4.3.4 Thickness The mean value of the thickness of the insulation shall be not less than the specified value in Table 3 and Table 4. However, the thickness at any place may be less than the specified value,

45、provided that the difference does not exceed 0,1 mm + 15 % of the specified value. Compliance shall be checked by the test given in 4.1 of EN 50396. 4.3.5 Mechanical properties before and after ageing The insulation shall have adequate mechanical strength and elasticity within the temperature limits

46、 to which it may be exposed in normal use. Compliance shall be checked by carrying out the tests specified for each type of insulation in: IEC 60502-1, Table 15 for EPR or similar; in addition, cables covered by this type of compound shall be subjected to a cold bending or elongation test at 50 C; E

47、N 50363-4-1, Table 2, TM 2 as a general purpose PVC compound; EN 50363-4-1, Table 2, TM 6 as a cold-resistant PVC compound; in addition cables covered with this type of compound shall be subjected to a cold impact test at -35 C; EN 50363-2-1, Table 2, EM 9 as a cross-linked silicone rubber compound.

48、 The applicable test methods and the results to be obtained for each type of insulation are also specified in the above-mentioned tables. 4.4 Marking 4.4.1 Indication of origin Cables shall be provided with an indication of origin consisting of either the manufacturers identification thread; or the

49、continuous marking of the manufacturers name or trade mark, by printing, or by indenting or embossing on the insulation. 4.4.2 Indication of code designation and cross-sectional area of the conductor Cables shall be provided with an indication of the code designation according to 6.2 and the cross-sectional area of the conductor “. mm2“. (See Table 3 and Table 4). This shall be made by printing or by indenting or embossing on the insu