EN 61000-2-10-1999 en Electromagnetic Compatibility (EMC) Part 2-10 Environment - Description of HEMP Environment - Conducted Disturbance《电磁兼容性 第2-10部分 环境 HEMP环境描述 传导干扰 IEC 61000-2.pdf

《EN 61000-2-10-1999 en Electromagnetic Compatibility (EMC) Part 2-10 Environment - Description of HEMP Environment - Conducted Disturbance《电磁兼容性 第2-10部分 环境 HEMP环境描述 传导干扰 IEC 61000-2.pdf》由会员分享，可在线阅读，更多相关《EN 61000-2-10-1999 en Electromagnetic Compatibility (EMC) Part 2-10 Environment - Description of HEMP Environment - Conducted Disturbance《电磁兼容性 第2-10部分 环境 HEMP环境描述 传导干扰 IEC 61000-2.pdf（47页珍藏版）》请在麦多课文档分享上搜索。

1、STD-ES1 BS EN bLOOO-2-LO-ENGL 1999 I lb2qbb7 0782q84 T7b R BRITISH STANDARD Electromagnetic compatibility (EMC) - Part 2-10: Environment - Description of HEMP environment - Conducted disturbance The European Standard EN 61000-2-101999 has the status of a British Standard ICs 33.100.10 NO COPYING WIT

2、HOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW BS EN 6 1000-2-10: 1999 IEC 6 1000-2 - 1 O: 1998 National foreword This British Standard is the English language version of EN 61002-101999. It is identical with IEC 61OW2-101998. The UK participation in its preparation was enirusted to Techni

3、cal Committee GEM10, Electromagnetic compatibility, which has the responsibility to: - aid enquirers to understand the text; - present to the responsible internationalEuropean committee any enquiries on the interpretalion, or proposals for change, and keep the UK interests informed; - monitor relate

4、d international and European developments and promuigate them in the UK. A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references Attention is drawn to the fact that CEN and CENELEC Standards normally include an annex which lists normative r

5、eferences to international publications with their corresponding European publications. The British Standards which implement these international or European publications may be found in the BSI St.andards Catalogue under the section entitled “International Standards Correspondence Index“, or by usi

6、ng the “Fnd“ facility of the BSI Standards Electronic Catalogue. A British standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity

7、from legal obligations. Summary of pages “his document comprises a front cover, an inside front cover, the EN title page, pages 2 to 44, an inside back cover and a back cover. This British Standard, having been prepared under the Amendments issued since publication direction- of the Electrotechnicai

8、 Sector Committee, was published under the authority of the Standards committee and comes into effect on 15 May 1999 Amd. No. +- 4- O BSI 05-1999 ISBN O 580 32560 1 I Text affected EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 61 000-2-1 O February 1999 ICs 33.100.01 Descriptors: Electromagne

9、tic compatibility, environments, pulses, electromagnetism, nuclear radiation, explosions, altitude, electromagnetic waves, radio disturbances English version Electromagnetic compatibility (EMC) Part 2-1 O: Environment - Description of HEMP environment Conducted disturbance (IEC 61 000-2-1 O: 1998) C

10、ompatibilit lectromagntique (CEM) Elektromagnetische Vertrglichkeit Partie 2-1 O: Environnement (EMVI Description de lenvironnement Teil 2-1 O: Umgebungsbedingungen IEMN-HA - Perturbations conduites Beschreibung der HEMP-Umgebung (CE1 61 000-2-1 O: 1998) Leitungsgefhrte Strgren (IEC 61000-2-10:1998)

11、 This European Standard was approved by CENELEC on 1999-01-01. CENELEC members are bound to comply with the CENKENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical

12、references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENE

13、LEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Net

14、herlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B - 1050 Brussels 1999

15、CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 61000-2-10:1999 E STD-BSI BS EN b1000-2-LD-ENGL 1779 1b24bb9 0782Lib7 7TS E Page 2 EN 61000-2- 10: 1999 Fore word The text of document 77C/61 /FDIS, future edition 1 of IEC 61 000-2-

16、1 O, prepared by SC 77C, Immunity to high altitude nuclear electromagnetic pulse (HEMP), of IEC TC 77, Electromagnetic compatibility, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 61 000-2-1 O on 1999-01-01. The following dates were fixed: - latest date by which th

17、e EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 1999-1 0-01 - latest date by which the national standards conflicting with the EN have to be withdrawn (dow) 2001-10-01 Annexes designated “normative“ are part of the body of the sta

18、ndard. Annexes designated “informative“ are given for information only. In this standard, annex ZA is normative and annexes A, 6, C and D are informative. Annex ZA has been added by CENELEC. Endorsement notice The text of the International Standard IEC 61 000-2-1 O: 1 998 was approved by CENELEC as

19、a European Standard without any modification. STD.BS1 BS EN bLECD-Z-LD-ENGL 1979 SS Lb2Ybb7 0782488 b31 W Page 3 EN 61000-2-10:1999 CONTENTS INTRODUCTION Clause 1 Scope 2 Normative references 3 General . 4 Definitions . 5 Description of HEMP environment, conducted parameters 5.1 Introductory remarks

20、 Early-time HEMP external conducted environment 5.2 5.3 intermediate-time HEMP external conducted environment 5.4 Late-time HEMP external conducted environment . 5.5 Antenna currents 5.6 HEMP internal conducted environments . Annex A (informative) Discussion of early-time HEMP coupling for long line

21、s . Annex 8 (informative) Discussion of intermediate-time HEMP coupling for long lines Annex C (informative) Responses of simple linear antennas to the IEC early-time HEMP environment Annex D (informative) Measured cable currents incide telephone buildings . Annex ZA Normative references to internat

22、ional publications with their corresponding European publications Page 4 5 5 6 4 IO 10 11 13 14 15 20 22 25 27 43 44 Q BSI 05-1999 STD.BSI S EN OLOOU-2-10-ENGL 1997 Lb24bb 0782Li89 578 M Page 4 EN 61000-2-10:1999 INTRODUCTION IEC 61000 is published in separate parts according to the following struct

23、ure: Part 1: General General considerations (introduction, fundamental principles) Definitions, terminology Part 2: Environment Description of the environment Classification of the environment Compatibility levels Part 3: Limits Emission limits Immunity limits (insofar as these limits do not fall un

24、der the responsibilty of the product committees) Part 4: Testing and measurement techniques Measurement techniques Testing techniques Installation and mitigation guidelines Installation guidelines Mitigation methods and devices Part 5: Part 6: Generic standards Part 9: Miscellaneous Each part is fur

25、ther subdivided into several parts, published either as International Standards or technical reports, some of which have already been published as sections. Others will be published with the part number followed by a dash and a second number identifying the subdivision. STD-BSI BS EN bLOUO-S-LO-ENGL

26、 1999 E Lb24bbS U7824iU 29T W Page 5 EN 61000-2-10:1999 ELECTROMAGNETIC COMPATIBILITY (EMC) - Part 2-10: Environment - Description of HEMP environment - Conducted disturbance 1 Scope This International Standard defines the high-altitude electromagnetic pulse (HEMP) conducted environment that is one

27、of the consequences of a high-altitude nuclear explosion. Those dealing with this subject consider two cases: - high-altitude nuclear explosions; - low-altitude nuclear explosions. For civil systems the most important case is the high-altitude nuclear explosion. In this case, the other effects of th

28、e nuclear explosion: blast, ground shock, thermal and nuclear ionizing radiation are not present at the ground level. However, the electromagnetic pulse associated with the explosion may cause disruption of, and damage to, communication, electronic and electric power systems thereby upsetting the st

29、ability of modern society. The object of this standard is to establish a common reference for the conducted HEMP environment in order to select realistic stresses to apply to victim equipment for evaluating their performance. 2 Normative references The following normative documents contain provision

30、s which, through reference in this text, constitute provisions of this part of IEC 61000. At the time of publication, the editions indicated were valid. All standards are subject to revision, and parties to agreements based on this part of IEC 61000 are encouraged to investigate the possibility of a

31、pplying the most recent editions of the normative documents indicated below. Members of IEC and IS0 maintain registers of currently valid International Standards. IEC 60050(161):1990, International Electrotechnical Vocabulary (IEV) - Chapter 767: Electromagnetic Compatibility IEC 61000-2-9:1996, Ele

32、ctromagnetic compatibility (EMC) - Part 2: Environment - Section 1: Description of HEMP environment - Radiated disturbance - Basic EMC publication IEC 61 000-4-24:1997, Electromagnetic compatibility (EMC) - Part 4: Testing and measurement techniques - Section 24: Test methods for protective devices

33、for HEMP conducted disturbance - Basic EMC publication 3 General A high-altitude (above 30 km) nuclear burst produces three types of electromagnetic pulses which are observed on the earths surface: - early-time HEMP (fast); - intermediate-time HEMP (med iu m) ; - late-time HEMP (slow). Historically

34、most interest has been focused on the early-time HEMP which was previously referred to as simply HEMP. Here we will use the term high-altitude EMP or HEMP to include all three types. The term NEMP covers many categories of nuclear EMPs including those produced by surface bursts (SREMP) 2, or created

35、 on space systems (SGEMP) 3). Because the HEMP is produced by a high-altitude detonation, we do not observe other nuclear weapon environments such as gamma rays, heat and shock waves at the earths surface. HEMP was reported from high-altitude nuclear tests in the South Pacific by the US and over the

36、 USSR during the early 1960s, producing effects on electronic equipment far from the burst location. This standard presents the conducted HEMP environment induced on metallic lines, such as cables or power lines, external and internal to installations, and external antennas. i) NEMP: Nuclear electro

37、magnetic pulse. 2, SREMP: Source region EMP. 3, SGEMP: System generated EMP. STD-BSI BS EN OLCI0-2-LO-ENGL 1177 0 Lbc74Lb9 C17CLI92 CIL2 Page 7 EN 61000-2-10:1999 4 Definitions For the purpose of this International Standard, the definitions given in IEC 60050(161) apply, as well as the following def

38、initions: Horizontal polarisation 4. inc Vertical H .c *. - -.c 1- - A I I I I/ A 0 .C Ground pk Figure 1 - Geometry for the definition of polarization and of the angles of elevation yand azimuth 4.1 angle of elevation in the vertical plane, iy angle y measured in the vertical plane between a flat h

39、orizontal surface such as the ground and the propagation vector (see figure 1) 4.2 azimuth angle, # angle between the projection of the propagation vector on the ground plane and the principal axis of the victim object (z axis for the transmission line of figure 1) 4.3 composite waveform waveform wh

40、ich maximizes the important features of a waveform 4.4 cou pl i ng interaction of the HEMP field with a system to produce currents and voltages on system surfaces and cables. Voltages result from the induced charges and are only defined at low frequencies with wavelengths larger than the surface or

41、gap dimensions 4.5 direction of propagation of the electromagnetic wave direction of the propagation vector ir, perpendicular to the plane containing the vectors of the electric and the magnetic fields (see figure 2) + Figure 2 - Geometry for the definition of the plane wave 4.6 El, E2, E3 terminolo

42、gy for the early, intermediate and late-time HEMP electric fields 4.7 EMP any electromagnetic pulse, general description 4.8 geomagnetic dip angle, dip angle of the geomagnetic flux density vector Be, measured from the local horizontal in the magnetic north-south plane. 6dip = 90“ at the magnetic no

43、rth pole, -90“ at the magnetic south pole, (see figure 3) + STD.BSI BS EN LLOC2-2-LO-ENGL 1999 B lb24bbl 0782404 935 I Page 9 EN 61000-2-10:1999 e Magnetic northisouth plane Figure 3 - Geomagnetic dip angle 4.9 HEMP high-altitude nuclear EMP 4.10 high-altitude (nuclear explosion) height of burst abo

44、ve 30 km altitude 4.1 1 horizontal polarization an electromagnetic wave is horizontally polarized if the magnetic field vector is in the incidence plane and the electric field vector is perpendicular to the incidence plane and thus parallel to the ground plane (see figure 1). (This type of polarizat

45、ion is also called perpendicular or transverse electric (TE).) 4.12 incidence plane plane formed by the propagation vector and the normal to the ground plane 4.1 3 low-altitude (nuclear explosion) height of burst below 1 km altitude 4.14 NEMP nuclear EMP; all types of EMP produced by a nuclear explo

46、sion 4.1 5 point-of-entry (POE) the physical location (point) on an electromagnetic barrier, where EM energy may enter or exit a topological volume, unless an adequate POE protective device is provided. A POE is not limited to a geometrical point. PoEs are classified as aperture PoEs or conductive P

47、oEs according to the type of penetration. They are also classified as architectural, mechanical, structural or electrical PoEs, according to the functions they serve 4.1 6 pulse width the time interval between the points on the leading and trailing edges of a pulse at which the instantaneous value i

48、s 50 % of the peak pulse amplitude, unless otherwise stated 4.17 rectified impulse (RI) the integral of the absolute value of a time waveforms amplitude over a specified time interval 4.18 rise time (puise) the time interval between the instants in which the instantaneous amplitude of a pulse first

49、reaches specified lower and upper limits, namely 10 % and 90 % of the peak pulse amplitude, unless otherwise stated 4.19 short-circuit current the value of current that flows when the output terminals of a circuit are shorted. This current is normally of interest when checking the performance of surge protection devices 4.20 source impedance the impedance presented by a source of energy to the input terminals of a device or network 4.21 vertical polarization an electromagnetic wave is vertically polarized if the electric field vector is in the incidence plane,