EN 50529-1-2010 en EMC Network Standard - Part 1 Wire-line telecommunications networks using telephone wires《EMC网络标准 第1部分 使用电话线的有线电信网络》.pdf

《EN 50529-1-2010 en EMC Network Standard - Part 1 Wire-line telecommunications networks using telephone wires《EMC网络标准 第1部分 使用电话线的有线电信网络》.pdf》由会员分享，可在线阅读，更多相关《EN 50529-1-2010 en EMC Network Standard - Part 1 Wire-line telecommunications networks using telephone wires《EMC网络标准 第1部分 使用电话线的有线电信网络》.pdf（16页珍藏版）》请在麦多课文档分享上搜索。

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN 50529-1:2010EMC Network StandardPart 1: Wire-line telecommunications networks using telephone wiresBS EN 50529-1:2010 BRITISH STANDARDNational forewordThis British Standard

2、 is the UK implementation of EN 50529-1:2010.The UK participation in its preparation was entrusted to TechnicalCommittee GEL/210/11, EMC product standards.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to include all

3、 the necessaryprovisions of a contract. Users are responsible for its correctapplication. BSI 2011ISBN 978 0 580 67458 7ICS 33.060.40Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Stra

4、tegy Committee on 28 February 2011.Amendments issued since publicationDate Text affectedBS EN 50529-1:2010EUROPEAN STANDARD EN 50529-1 NORME EUROPENNE EUROPISCHE NORM November 2010 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europis

5、ches Komitee fr Elektrotechnische Normung Management Centre: Avenue Marnix 17, B - 1000 Brussels 2010 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 50529-1:2010 E ICS 33.060.40 English version EMC Network Standard - Part 1: Wire

6、-line telecommunications networks using telephone wires Norme CEM pour les rseaux de tlcommunications - Partie 1 : Rseaux de tlcommunications filaires utilisant des cbles tlphoniques EMV-Norm fr bertragungsnetze - Teil 1: Leitungsgebundene bertragungsnetze, die Telekommunikationsleitungen nutzen Thi

7、s European Standard was approved by CENELEC on 2010-11-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical ref

8、erences concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC

9、 member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hun

10、gary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. BS EN 50529-1:2010EN 50529-1:2010 2 Foreword This European Standard was prepared by the Joint CENELEC ETSI W

11、orking Group EMC of conducted transmission networks. It was submitted to the formal vote and was approved by CENELEC as EN 50529-1 on 2010-11-01. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and CENELEC shall not be held re

12、sponsible for identifying any or all such patent rights. The following dates were fixed: latest date bywhich the EN has to be implementedat national level by publication of an identicalnational standard or byendorsement (dop) 2011-11-01 latest date bywhich the national standards conflictingwith the

13、EN have to be withdrawn (dow) 2013-11-01This European Standard has been prepared under Mandate M/313 given to CENELEC and ETSI by the European Commission and the European Free Trade Association and covers essential requirements of EC Directive 2004/108/EC 1). See Annex ZZ. _ 1)Directive 2004/108/EC

14、of the European Parliament and of the Council of 15 December 2004 on the approximation of the laws of the Member States relating to electromagnetic compatibility and repealing Directive 89/336/EEC, OJ L 390, 31.12.2004, p. 24-37. BS EN 50529-1:2010 3 EN 50529-1:2010 Contents Introduction .4 1 Scope

15、5 2 Normative references 5 3 Terms, definitions and abbreviations .6 3.1 Terms and definitions 6 3.2 Abbreviations 7 4 Requirements for networks 7 4.1 Introduction .7 4.2 Apparatus for wire-line telecommunications networks using telephone wires7 A n n e x A ( i n f o r m a t i v e ) Example of good

16、engineering practice 9 A n n e x Z Z (informative) Coverage of Essential Requirements of EC Directives . 10 Bibliography . 11 Table Table 1 Harmonised EMC standards for apparatus using telephone wires 8 BS EN 50529-1:2010EN 50529-1:2010 4 Introduction The present document is part of the multi-part E

17、MC standard that specifies limits and methods of measurement for emissions emanating from wire-line telecommunication networks and immunity of those networks by means of references to harmonised product standards in combination with good engineering practice. BS EN 50529-1:2010 5 EN 50529-1:2010 1 S

18、cope This EMC standard specifies requirements for emissions originating from within wire-line telecommunication networks using telephone wires and the immunity of those networks, including their in-premises extensions by references to harmonised EMC product standards and other standards with EMC req

19、uirements in combination with good engineering practice, when installed and operated as intended. This standard covers the frequency range 9 kHz to 400 GHz. The assessment of a network needs to be performed only in the frequency ranges where limits are defined in the relevant product standards. The

20、emission limits set in this standard do not apply to the wanted emissions from embedded radio links within the network. The requirements have been selected so as to ensure that electromagnetic disturbances generated by a network, or parts thereof, operating normally do not exceed a level above which

21、 radio and telecommunications equipment or other equipment cannot operate as intended. Fault conditions of the network are not taken into account. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition

22、cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 55022:2006 2)+A1:2007Information technology equipment Radio disturbance characteristics Limits and methods of measurement (CISPR 22:2005, mod. + A1:2005)EN 55024:1998 2) +A1:20

23、01 +A2:2003Information technology equipment Immunity characteristics Limits and methods of measurement (CISPR 24:1997, mod. + A1:2001 + A2:2002)ETSI EN 300 386: V1.4.1(2008-04)2)Electromagnetic compatibility and Radio spectrum Matters (ERM); Telecommunication network equipment; ElectroMagnetic Compa

24、tibility (EMC) requirementsETSI EN 301 489 series Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services ETSI TR101 651(V1.1.1)ElectroMagnetic Compatibility and Radio Spectrum Matters (ERM) Classification of the e

25、lectromagnetic environment conditions for equipment in telecommunication networksIEC 60050-161:1990 +A1:1997 +A2:1998International Electrotechnical Vocabulary Chapter 161: Electromagnetic compatibilityEN 50121-4:2006 2) 3)+ corrigendum May 2008Railway applications - Electromagnetic compatibility Par

26、t 4: Emission and immunity of the signalling and te lecommunications apparatusEN 55013:20012)Sound and television broadcast receivers and associated equipment - Radio disturbance characteristics - Limits and methods of measurement (CISPR 13:2001, mod.)EN 55020:2007 2)Sound and television broadcast r

27、eceivers and associated equipment - Immunity characteristics - Limits and methods of measurement (CISPR 20:2006) 2)And all previous editions listed in the OJEC. 3)This only applies to railway networks or parts thereof. BS EN 50529-1:2010EN 50529-1:2010 6 3 Terms, definitions and abbreviations 3.1 Te

28、rms and definitions For the purposes of this document, the following terms and definitions apply. 3.1.1 (electromagnetic) disturbance any electromagnetic phenomenon which may degrade the performance of a device, equipment or system, or adversely affect living or inert matter NOTE An electromagnetic

29、disturbance may be an electromagnetic noise, an unwanted signal or a change in the propagation medium itself. IEV 161-01-05 3.1.2 electronic communications network means transmission systems and, where applicable, switching or routing equipment and other resources which permit the conveyance of sign

30、als by wire, by radio, by optical or by other electromagnetic means, including satellite networks, fixed (circuit- and packet-switched, including Internet) and mobile terrestrial networks, electricity cable systems, to the extent that they are used for the purpose of transmitting signals, networks u

31、sed for radio and television broadcasting, and cable television networks, irrespective of the type of information conveyed Derived from Art.2.a) of Directive 2002/21/EC 1 (Framework Directive) 3.1.3 emission phenomenon by which electromagnetic energy emanates from a source IEV 161-01-08 3.1.4 equipm

32、ent for the purposes of this standard equipment means any apparatus or fixed installation 3.1.5 immunity (to a disturbance) ability of a device, equipment or system to perform without degradation in the presence of an electromagnetic disturbance IEV 161-01-20 3.1.6 network cable cable infrastructure

33、 (transmission line) used to connect together equipment 3.1.7 wire-line telecommunication network combination of equipment and passive devices (network cables, connectors) interconnected together to constitute the wire-line part of an electronic communications network. The present standard also appl

34、ies to the wire-line portion of a radio network BS EN 50529-1:2010 7 EN 50529-1:2010 3.2 Abbreviations For the purposes of this document, the following abbreviations apply. CENELEC European Committee for Electrotechnical Standardization CISPR International Special Committee on Radio Interference EMC

35、 Electromagnetic Compatibility ETSI European Telecommunications Standards Institute IEC International Electrotechnical Commission IEV International Electrotechnical Vocabulary 4 Requirements for networks 4.1 Introduction Assuming that apparatus meet the EMC requirements defined in the applicable EMC

36、 product standards a network or a network segment using telephone wires is deemed to be compliant to the present standard provided that: all apparatus when first connected directly to the network or network segment meets the requirements defined in the version of EMC product standards listed in Tabl

37、e 1 applicable when that apparatus was placed on the market, for both emission and immunity taking into account the properties of the network or network segment; the apparatus is installed according to the manufacturers instructions; the network or network segment has been built, configured and main

38、tained according to good engineering practice to achieve electromagnetic compatibility and this practice is documented. Examples of good engineering practice meeting the criteria above are given in Annex A. 4.2 Apparatus for wire-line telecommunications networks using telephone wires All apparatus i

39、nstalled in the network shall comply with all EMC requirements for emission and immunity of the appropriate standards listed in Table 1. BS EN 50529-1:2010EN 50529-1:2010 8 Table 1 Harmonised EMC standards for apparatus using telephone wires Standards No. TitleETSI EN 300 386 Electromagnetic compati

40、bility and Radio spectrum Matters (ERM); Telecommunication network equipment; ElectroMagnetic Compatibility (EMC) requirementsETSI EN 301 489 series Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and servicesEN 55022 I

41、nformation technology equipment Radio disturbance characteristics Limits and methods of measurement (CISPR22)EN 55024 Information technology equipment Immunity characteristics Limits and methods of measurement (CISPR 24)EN 50121-4This only applies to railway networks or parts thereof.Railway applica

42、tions - Electromagnetic compatibility Part 4: Emission and immunity of the signalling and telecommunications apparatusEN 55013 Sound and television broadcast receivers and associated equipment -Radio disturbance characteristics - Limits and methods of measurement (CISPR 13)EN 55020 Sound and televis

43、ion broadcast receivers and associated equipment -Immunity characteristics - Limits and methodsof measurement (CISPR 20)BS EN 50529-1:2010 9 EN 50529-1:2010 A n n e x A (informative) Example of good engineering practice For a traditional telecommunication network good EMC engineering practice means

44、the following: a) Only connecting apparatus found to be compliant against the relevant EMC standards using an appropriate representation of the cable type to which the apparatus is required to be connected. For example not connecting apparatus that was tested for compliance with a screened network c

45、able to a network that is built of unscreened cable. b) Apparatus should be earthed and bonded in accordance with the manufacturers installation instructions. NOTE E.g. in accordance with ETSI EN 300 253. c) Traditional network cable routes should be separated as far as possible from AC power networ

46、k cabling in order to minimise coupling of electromagnetic disturbances from the power network into the telecommunications network. d) At the time of first connecting the apparatus to the network, steps should be taken to ensure that the network cable is free from faults. e) During the installation

47、of any new network infrastructure (for example new cable routes) consideration should be given to locating it as far as possible away from any existing fixed radio receiving antennas. BS EN 50529-1:2010EN 50529-1:2010 10 A n n e x Z Z (informative) Coverage of Essential Requirements of EC Directives

48、 This European Standard has been prepared under a mandate given to CENELEC and ETSI by the European Commission and the European Free Trade Association and within its scope the standard covers essential requirements as given in Annex I of the EC Directive 2004/108/EC. Compliance with this standard pr

49、ovides one means of conformity for fixed installations with the specified essential requirements of the Directive concerned. WARNING: Other requirements and other EC Directives may be applicable to the fixed installations falling within the scope of this standard. BS EN 50529-1:2010 11 EN 50529-1:2010 Bibliography 1 Directive 2002/21/EC of the European Parliament and of the Council of 7 March 2002 on a common regulatory framework for electronic communications ne