EN 15020-2006 en Railway applications - Rescue coupler - Performance requirements specific interface geometry and test methods (Incorporates Amendment A1 2010)《轨道交通 救援车挂钩 性能要求 专用连接.pdf

《EN 15020-2006 en Railway applications - Rescue coupler - Performance requirements specific interface geometry and test methods (Incorporates Amendment A1 2010)《轨道交通 救援车挂钩 性能要求 专用连接.pdf》由会员分享，可在线阅读，更多相关《EN 15020-2006 en Railway applications - Rescue coupler - Performance requirements specific interface geometry and test methods (Incorporates Amendment A1 2010)《轨道交通 救援车挂钩 性能要求 专用连接.pdf（30页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARDBS EN 15020:2006+A1:2010 Railway applications Rescue coupler Performance requirements, specific interface geometry and test methodsICS 45.060.01g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44

2、g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58National forewordThis British Standard is the UK implementation of EN 15020:2006+A1:2010. It supersedes BS EN 15020:2006,which is withdrawn.The start and finish of text introduced or altered by amendment is indicated in the text by tags. Ta

3、gs indicating changes to CEN text carry the number of the CEN amendment. For example, text altered by CEN amendment A1 is indicated by !“.The UK participation in its preparation was entrusted by Technical Committee RAE/1, Railway applications, to Panel RAE/1/-/13, Railway applications Towing coupler

4、s.A list of organizations represented on RAE/1/-/13 can be obtained on request to its secretary.The requirements and recommendations of this standard are based on an existing established rescue coupler in use in Continental Europe. Caution should be exercised before using this rescue coupler in the

5、UK, since it is incompatible with many of the potential rescue vehicles.Many UK-based locomotives in service are fitted with drawgear which is not designed for a buff load. Additionally, locomotives fitted with the Swing-Head Automatic Coupler (which is compatible with buff loads) have very limited

6、space around the drawhook. The rescue coupler is not compatible with any coupler except the UIC-pattern 520 drawhook (UIC 520 is to be superseded by EN15566 (due for publication in 2008).Normative A (mandatory) requirement defined as an expression in the content of a document conveying criteria to b

7、e fulfilled if compliance with the document is to be claimed and from which no deviation is permitted CEN/CENELEC Internal Regulations, Part 3: Rules for the Structure and Drafting of European Standards (PNE-Rules).Informative Information (not mandatory) intended to assist the understanding or use o

8、f the document. Informative annexes shall not contain requirements, except as optional requirements. (For example, a test method that is optional may contain requirements but there is no need to comply with these requirements to claim compliance with the document.)This publication does not purport t

9、o include all the necessary provisions of a contract. Users are responsible for its correct application.Compliance with a British Standard cannot confer immunity from legal obligations.BS EN 15020:2006+A1:2010This British Standard was published under the authority of the Standards Policy and Strateg

10、y Committee on 30 April 2007 BSI 2011Amendments/corrigenda issued since publicationDate Comments 31 January 2011 Implementation of CEN amendment A1:2010ISBN 978 0 580 70855 8EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 15020:2006+A1 November 2010 ICS 45.060.01 Supersedes EN 15020:2006English

11、 Version Railway applications - Rescue coupler - Performance requirements, specific interface geometry and test methods Applications ferroviaires - Attelage de secours - Exigences concernant la performance, la gomtrie des interfaces et les mthodes dessai Bahnanwendungen - Abschleppkupplung - Leistun

12、gsanforderungen, spezifische Schnittstellengeometrie und Prfverfahren This European Standard was approved by CEN on 2 October 2006 and includes Amendment 1 approved by CEN on 28 September 2010. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions f

13、or giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. This European Standard exists in three offic

14、ial versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria,

15、 Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN

16、 COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 15020:2006+A1:2010: EEN 15020:20

17、06+A1:2010 (E) 2 Contents Page Foreword 31 Scope 42 Normative references 43 Terms and definitions .44 Product requirements .55 Test requirements 8Annex A (informative) Automatic coupler 10Annex B (normative) Rescue coupler . 14Annex C (informative) Characteristics of the rescue vehicle 18Annex D (in

18、formative) Air pipe coupling heads 21Annex ZA (informative) !Relationship between this European Standard and the Essential Requirements of EU Directive 2008/57/EC of the European Parliament and of the Council of 17 June 2008 on the interoperability of the rail system within the Community (Recast)“ 2

19、4Bibliography . 26Figure 1 Pneumatic connection between the rescue vehicle and the rescue coupler .7Figure A.1 Automatic coupler (front view) . 10Figure A.2 Automatic coupler (top view) 11Figure A.3 Automatic coupler (lateral view) . 12Figure A.4 Automatic coupler (isometric view) 13Figure B.1 Rescu

20、e coupler (lateral view) 14Figure B.2 Rescue coupler (top view) . 15Figure B.3 Rescue coupler (front view) 16Figure B.4 Rescue coupler (isometric view) 17Figure C.1 Draw hook . 18Figure C.2 Available space for locomotives with foot-step 19Figure C.3 Connection for air pipes (see UIC 648:2001, Annex

21、A) 20Figure D.1 Coupling head for brake pipe 21Figure D.2 Washer . 22Figure D.3 Washer with bevelled edge 22Figure D.4 Coupling head for main reservoir pipe 23BS EN 15020:2006+A1:2010EN 15020:2006+A1:2010 (E) 3 Foreword This document (EN 15020:2006+A1:2010) has been prepared by Technical Committee C

22、EN/TC 256 “Railway applications”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by May 2011, and conflicting national standards shall be withdrawn at the la

23、test by May 2011. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document includes Amendment 1, approved by CEN on 2010-09-28. T

24、his document supersedes EN 15020:2006. The start and finish of text introduced or altered by amendment is indicated in the text by tags ! “. !This document has been prepared under a mandate given to CEN/CENELEC/ETSI by the European Commission and the European Free Trade Association, and supports ess

25、ential requirements of EU Directive 2008/57/EC. For relationship with EU Directive 2008/57/EC, see informative Annex ZA, which is an integral part of this document.“ The requirements on coupling interfaces of end couplers will be dealt with in a new work item. According to the CEN/CENELEC Internal R

26、egulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg,

27、 Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. BS EN 15020:2006+A1:2010EN 15020:2006+A1:2010 (E) 4 1 Scope This European Standard specifies the requirements for the rescue coupler for train sets compliant with the Technical

28、Specification for Interoperability High Speed Rolling Stock. It defines the interfaces to which it has to match during rescue operations. It is suitable for locomotives fitted with UIC 520 pattern draw gear and buffers, i.e. moveable draw hook and draw gear capable of compressive loading.1)Provision

29、s going beyond the scope of this European Standard need to be agreed upon by the contracting parties involved. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated reference

30、s, the latest edition of the referenced document (including any amendments) applies. prEN 15085, Railway applications Welding of railway vehicles and components EN ISO 5817, Welding Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) Quality levels for imperfecti

31、ons (ISO 5817:2003) 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 rescue coupler special coupling that enables the hauling and propelling of a failed train unit or train set by another vehicle that is equipped with different coupling design

32、 3.2 rescue vehicle type of vehicle used to rescue a failed train unit or train set 3.3 automatic coupler latch-type automatic coupler allowing the mechanical, pneumatic and in some cases electrical connection between two train units or train sets without manual assistance, also known as “Scharfenbe

33、rg system type 10“ automatic coupler 3.4 draw hook part of a conventional and mechanical manual coupling, also known as UIC draw hook 3.5 main reservoir pipe pipe containing air pressure at a value which is sufficient to supply subsystems including the brake system EN 14478:2005 1)UIC 520 will be re

34、placed by a European Standard on draw gear and buffers which is in preparation (prEN 15551 for buffers and prEN 15566 for draw gears). BS EN 15020:2006+A1:2010EN 15020:2006+A1:2010 (E) 5 3.6 brake pipe pipe containing and conveying fluid, usually air, enabling train brake control EN 14478:2005 3.7 a

35、ir pipe coupling head special connection situated at the free end of the hoses used for conventional pneumatic links between vehicles (see Annex D) 4 Product requirements 4.1 Rescue coupler characteristics The rescue coupler shall be compatible with: the Scharfenberg system type 10 automatic coupler

36、2)having the dimensions specified in Annex A and the draw hook having the dimensions shown in Figure C.1. The main dimensions and characteristics of the rescue coupler shall be as given in Annex B. The mass of the complete rescue coupler in its operational condition shall not exceed 50 kg. The rescu

37、e coupler shall be able to withstand the following loads without permanent deformation: maximum tensile load = 300 kN; maximum compressive load = 250 kN. NOTE There are no fatigue requirements for the rescue coupler. The rescue coupler shall be equipped with handles or components which serve as such

38、 for transport and lifting. Material certificates and weld-classes used shall meet current requirements. Welded parts shall be in accordance with prEN 15085 and EN ISO 5817. 4.2 Rescue vehicle characteristics The rescue vehicle characteristics to be taken into account are defined as follows: connect

39、ions for electric cables and air pipes on head stocks of locomotives (see Figure C.3); draw hook (see Figure C.1). Due to different markings located on both sides of the hook it is compulsory to consider a 2059+mm hook width; pneumatic coupling for brake pipe and main air reservoir pipe (see Annex D

40、). The rescue coupler pneumatic pipes and their connections shall be provided for a 10 bar pressure. 2) Scharfenberg is a registered trademark of Voith Turbo Scharfenberg, Salzgitter, Germany. This information is given for the convenience of users of this European Standard and does not constitute an

41、 endorsement by CEN of the product bearing this trademark. Equivalent products may be used if they can be shown to lead to the same results. BS EN 15020:2006+A1:2010EN 15020:2006+A1:2010 (E) 6 4.3 Fitting procedure The rescue coupler shall be placed close to the front of the rescue vehicle. The resc

42、ue coupler shall be mounted on the draw hook. It shall be possible for the coupler to be lifted and mounted onto the draw hook of the rescue vehicle by no more than two persons. The available space around the draw hook of the rescue vehicle shall be taken into account. Mounting of the rescue coupler

43、 on the draw hook shall not require any special tools. The coupler shall be secured to the draw hook with a fixing device in such a way that it cannot freely move or come off the draw hook during the rescue operation. Once the rescue coupler is mounted on the draw hook of the rescue vehicle: the ins

44、talled rescue coupler shall have at least 6 vertical movement from the horizontal during operation; it shall be possible for the coupler to be adjusted vertically on the draw hook without the need for special tools; coupling and uncoupling operation shall not require any human presence between the r

45、escue vehicle and the failed train unit or train set whilst either is being moved; the rescue coupler and the pneumatic hoses shall not limit the maximum lateral movement of the draw hook. 4.4 Coupling conditions 4.4.1 Mechanical coupling The mechanical coupling between the automatic coupler on the

46、failed train set and the rescue coupler on the rescue vehicle shall be automatic. It shall be possible to couple a train set to a rescue vehicle in a 150 m radius curve. For vehicles fitted with automatic couplers, the car builder shall demonstrate: automatic coupling with a rescue coupler uncouplin

47、g performance in 150 m radius curve conditions. The rescue coupler shall be designed to ensure that coupling is possible when the height mismatch between the centre lines of the automatic coupler and the draw hook is up to 75 mm. Use of guide horn is not compulsory if this requirement is fulfilled b

48、y the vertical adjustability of the rescue coupler. Coupling operation should be done as follows: at a speed not exceeding 2 km/h; the rescue coupler shall be aligned in order to be coupled with the mating automatic coupler of the failed train unit or train set to be rescued. BS EN 15020:2006+A1:201

49、0EN 15020:2006+A1:2010 (E) 7 4.4.2 Pneumatic coupling Connection of the air pipes (brake pipe and main reservoir pipe) shall be made semi-automatically through the rescue coupler. Therefore, the rescue coupler air pipe ends shall be equipped with air pipe coupling heads which allow manual connection of the rescue vehicle air pipes (see Figure 1). Following testing on location at the manufacturers establishment the