EN 2266-005-2005 en Areospace series - Cables electrical for general purpose Operating temperatures between -55 degrees C and 200 degrees C Part 005 UV laser printable Product stan.pdf

《EN 2266-005-2005 en Areospace series - Cables electrical for general purpose Operating temperatures between -55 degrees C and 200 degrees C Part 005 UV laser printable Product stan.pdf》由会员分享，可在线阅读，更多相关《EN 2266-005-2005 en Areospace series - Cables electrical for general purpose Operating temperatures between -55 degrees C and 200 degrees C Part 005 UV laser printable Product stan.pdf（12页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD AEROSPACE SERIESBS EN 2266-005:2005Cables, electrical, for general purpose Operatingtemperatures between S55 C and 200 C Part 005: UV laser printable Product standardThe European Standard EN 2266-005:2005 has the status of a British StandardICS 49.060g49g50g3g38g50g51g60g44g49g42g3g

2、58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58BS EN 2266-005:2005This British Standard was published under the authority of the Standards Policy and Strategy Committee on 3 March

3、 2006 BSI 3 March 2006ISBN 0 580 47885 8National forewordThis British Standard is the official English language version of EN 2266-005:2005. The UK participation in its preparation was entrusted by Technical Committee ACE/6, Aerospace avionic electrical and fibre optic technology, to Subcommittee AC

4、E/6/-/2, Aerospace cables, which has the responsibility to: A list of organizations represented on this subcommittee can be obtained on request to its secretary.Cross-referencesThe British Standards which implement international or European publications referred to in this document may be found in t

5、he BSI Catalogueunder the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online.This publication does not purport to include all the necessary provisions of a contract. Users are responsible f

6、or its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep UK intere

7、sts informed; monitor related international and European developments and promulgate them in the UK.Summary of pagesThis document comprises a front cover, an inside front cover, the EN title page, pages 2 to 8, an inside back cover and a back cover.The BSI copyright notice displayed in this document

8、 indicates when the document was last issued.Amendments issued since publicationAmd. No. Date CommentsEUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORMEN 2266-005 November 2005 ICS 49.060English Version Aerospace series - Cables, electrical, for general purpose - Operating temperatures between - 55

9、C and 200 C - Part 005: UV laser printable - Product standard Srie arospatiale - Cbles, lectriques, dusage gnral - Tempratures de fonctionnement comprises entre - 55 C et 200 C - Partie 005 : Marquables au laser UV - Norme de produit Luft- und Raumfahrt - Leitungen, elektrisch, fr allgemeine Verwend

10、ung - Betriebstemperaturen zwischen - 55 C und 200 C - Teil 005: UV Laser bedruckbar - Produktnorm This European Standard was approved by CEN on 30 September 2005. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standa

11、rd the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. This European Standard exists in three official versions (English, French, G

12、erman). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic,

13、Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION

14、EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2005 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 2266-005:2005: E2Contents PageForeword 31 Scope .42 Normative references .43 Terms and defin

15、itions.44 Materials and construction.45 Required characteristics 56 Quality assurance .87 Designation .88 Identification and marking89 Packaging, labelling and delivery lengths 810 Technical specification.8EN 2266-005:20053Foreword This European Standard (EN 2266-005:2005) has been prepared by the E

16、uropean Association of Aerospace Manufacturers - Standardization (AECMA-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of AECMA, prio

17、r to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by May 2006, and conflicting national standards shall be withdrawn at the latest by May 2006. Attention is drawn to the p

18、ossibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countrie

19、s are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland

20、 and the United Kingdom. EN 2266-005:200541 Scope This standard specifies the characteristics of UV laser printable electrical cables for use in the on-board electrical systems of aircraft at operating temperatures between 55 C and 200 C. It shall also be possible to mark these cables by hot stamp p

21、rinting or ink jet printing. These markings shall be in accordance with EN 3838. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the r

22、eferenced document (including any amendments) applies. EN 2083, Aerospace series Copper or copper alloy conductors for electrical cables Product standard.EN 2084, Aerospace series Cables, electric, single-core, general purpose, with conductors in copper or copper alloy Technical specification.1)EN 2

23、266-002, Aerospace series Cables, electrical, for general purpose Operating temperatures between 55 C and 200 C Part 002: General.EN 3475-100*, Aerospace series Cables, electrical, aircraft use Test methods Part 100: General.EN 3838, Aerospace series Requirements and tests on user-applied markings o

24、n aircraft electrical cables.1)EN 9133, Aerospace series Quality management systems Qualification Procedure for aerospace standard parts. 3 Terms and definitions For the purposes of this standard, the terms and definitions given in EN 3475-100 apply. 4 Materials and construction 4.1 Materials Conduc

25、tor: see EN 2266-002 Insulation: first layer polyimide with total thickness (nominal value) of 30 m, coated on both sides with a layer 2,5 m thick of fluorocarbon; direction of winding immaterial - overlap 51 % min.; * And all its parts quoted in Table 2. 1) Published as AECMA Prestandard at the dat

26、e of publication of this standard. EN 2266-005:20055 second layer polyimide with total thickness (nominal value) of 30 m, coated on both sides with a layer 2,5 m thick of fluorocarbon - running in opposite direction to first layer - overlap 51 % min.; top coat of dispersion fluorocarbon, wall thickn

27、ess 10 m min., including the necessary additives for the acceptance of user-applied UV laser marking. 4.2 Construction See EN 2083 and Table 1. Table 1 Code for nominalsection Nominal section AWGaLinear resistance at 20 C External diameter Massmm2/km max. mmmin.mmmax. kg/km max. 001 0,15 26 160,0 0,

28、75 0,84 2,00 002 0,25 24 114,0 0,85 0,94 2,65 004 0,4 22 60,0 0,96 1,09 3,90 006 0,6 20 33,2 1,20 1,34 6,55 010 1 18 21,1 1,44 1,59 9,90 012 1,2 16 14,5 1,65 1,84 13,90 020 2 14 10,9 1,90 2,10 18,50 030 3 12 6,8 2,38 2,60 29,70 050 5 10 4,2 3,00 3,19 46,50 051b5 10 4,1 3,03 3,25 48,30 aAWG = Closest

29、 American Wire Gage. bFlexible construction which may be used as an alternative. 4.3 Number of cores See EN 2266-002. 4.4 Colours coding of cores See EN 2266-002. 5 Required characteristics According to EN 2084 and EN 3475-100. See Table 2. EN 2266-005:20056Table 2 EN 3475- Test Details 201 Visual e

30、xamination Applicable 202 Mass Applicable; see Table 1. 203 Dimensions Applicable; see Table 1. 301 Ohmic resistance per unit length Applicable; see Table 1. 302 Voltage proof test Applicable 303 Insulation resistance Applicable 304 Surface resistance Applicable 305 Overload resistance Applicable T1

31、= (250 5) C; T2= (400 5) C 401 Accelerated ageing Applicable Temperature (250 5) C 402 Shrinkage and delamination Applicable Temperature (250 5) C Maximum shrinkage at each end of cable: 0,15 mm2to 0,60 mm2: 0,80 mm 1,00 mm2to 1,20 mm2: 1,00 mm 2,00 mm2to 5,00 mm2: 1,20 mm 403 Delamination and block

32、ing Applicable Temperature (250 5) C 404 Thermal shock Applicable Temperature (250 5) C Maximum shrinkage at each end of cable: 0,15 mm2to 0,60 mm2: 0,80 mm 1,00 mm2to 1,20 mm2: 1,00 mm 2,00 mm2to 5,00 mm2: 1,20 mm 405 Bending at ambient temperature Applicable 406 Cold bend test Applicable 407 Flamm

33、ability Applicable Extinguishing time: 3 s max. 408 Fire resistance Not applicable 409 Air-excluded ageing Not applicable 410 Thermal endurance Applicable 40 000 h (temperature 200 C) 411 Resistance to fluids Applicable continued EN 2266-005:20057Table 2 (concluded) EN 3475- Test Details 501 Dynamic

34、 cut-through Applicable Temperatures (20 3) C and (200 5) C Cut-through force Nominal section mm220 C N200 C N0,15 0,25 0,40 0,60 1,00 1,20 2,00 3,00 5,00 70851101401401501501651805070100130130140140150160502 Notch propagation Applicable Notch depth: 40 m503 Scrape abrasion Applicable Test force on

35、needle for cables: 0,15 mm2= 5 N 0,25 mm2to 0,60 mm2= 8 N 1,00 mm2to 1,20 mm2= 10 N 2,00 mm2to 5,00 mm2= 12 N 504 Torsion Applicable T3= (200 5) C ; T4= (250 5) C 505 Tensile test on conductors and strands Applicable 506 Plating continuity Applicable 507 Adherence of plating Applicable 508 Plating t

36、hickness Applicable 509 Solderability Not applicable 601 Smoke density Applicable 602 Toxicity Applicable 603 Resistance to wet arc tracking Not applicable 604 Resistance to dry arc propagation Not applicable 701 Strippability and adherence of insulation to the conductor Applicable 702 Screen pushba

37、ck capability Not applicable 703 Permanence of manufacturers marking Applicable EN 2266-005:200586 Quality assurance See EN 9133. 7 Designation EXAMPLE Description block CABLE, ELECTRICAL Identity block EN2266-005A010P Number of this standard Code letter for number of cores (see EN 2266-002, Table 1

38、) Code for nominal section (see Table 1) Code letter for colour coding of cores (see EN 2266-002, Tables 2 and 3) NOTE If necessary, the code I9005 shall be placed between the description block and the identity block. 8 Identification and marking See EN 2266-002. 9 Packaging, labelling and delivery

39、lengths See EN 2084. 10 Technical specification See EN 2084. EN 2266-005:2005blankBS EN 2266-005:2005BSI389 Chiswick High RoadLondonW4 4ALBSI British Standards InstitutionBSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe

40、and at the international level. It is incorporated by Royal Charter.RevisionsBritish Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions.It is the constant aim of BSI to improve the quality of our products an

41、d services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: +44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400.BSI offe

42、rs members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards.Buying standardsOrders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +4

43、4 (0)20 8996 7001. Email: ordersbsi-. Standards are also available from the BSI website at http:/www.bsi-.In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards,unless otherwise requested.Information

44、 on standardsBSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Inf

45、ormation Centre. Tel: +44 (0)20 8996 7111. Fax: +44 (0)20 8996 7048. Email: infobsi-.Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administrat

46、ion. Tel: +44 (0)20 8996 7002. Fax: +44 (0)20 8996 7001. Email: membershipbsi-.Information regarding online access to British Standards via British Standards Online can be found at http:/www.bsi- information about BSI is available on the BSI website at http:/www.bsi-.CopyrightCopyright subsists in a

47、ll BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means e

48、lectronic, photocopying, recording or otherwise without prior written permission from BSI.This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained.Details and advice can be obtained from the Copyright & Licensing Manager. Tel: +44 (0)20 8996 7070. Fax: +44 (0)20 8996 7553. Email: copyrightbsi-.