EN 13411-7-2006 en Terminations for steel wire ropes - Safety - Part 7 Symmetric wedge socket (Incorporates Amendment A1 2008)《钢丝绳终端设备的安全性 第7部分 对称楔形连接套筒 包含修改件A1-2008》.pdf

《EN 13411-7-2006 en Terminations for steel wire ropes - Safety - Part 7 Symmetric wedge socket (Incorporates Amendment A1 2008)《钢丝绳终端设备的安全性 第7部分 对称楔形连接套筒 包含修改件A1-2008》.pdf》由会员分享，可在线阅读，更多相关《EN 13411-7-2006 en Terminations for steel wire ropes - Safety - Part 7 Symmetric wedge socket (Incorporates Amendment A1 2008)《钢丝绳终端设备的安全性 第7部分 对称楔形连接套筒 包含修改件A1-2008》.pdf（24页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARDBS EN 13411-7:2006 +A1:2008Terminations for steel wire ropes Safety Part 7: Symmetric wedge socketICS 21.060.70; 53.020.30g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3

2、g38g50g51g60g53g44g42g43g55g3g47g36g58BS EN 13411-7:2006+A1:2008This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 July 2006 BSI 2009ISBN 978 0 580 60261 0National forewordThis British Standard is the UK implementation of EN 13411-7:2006+A1:2

3、008. It supersedes BS EN 13411-7:2006 which is withdrawn.The start and finish of text introduced or altered by amendment is indicated in the text by tags. Tags indicating changes to CEN text carry the number of the CEN amendment. For example, text altered by CEN amendment A1 is The UK participation

4、in its preparation was entrusted to Technical Committee MHE/2, Wire ropes. A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct

5、application. Compliance with a British Standard cannot confer immunity from legal obligations.Amendments/corrigenda issued since publicationindicated by !“ .Date Comments30 June 2009 Implementation of CEN amendment A1:2008EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 13411-7:2006+A1 October 2

6、008 ICS 21.060.70; 53.020.30 Supersedes EN 13411-7:2006 English Version Terminations for steel wire ropes - Safety - Part 7: Symmetric wedge socket Terminaisons pour cbles en acier - Scurit - Partie 7: Bote coin symtrique Endverbindungen fr Drahtseile aus Stahldraht - Sicherheit - Teil 7: Symmetrisc

7、he Seilschlsser This European Standard was approved by CEN on 10 May 2006 and includes Amendment 1 approved by CEN on 18 September 2008. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national

8、 standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any

9、other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Esto

10、nia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EURO

11、PISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2008 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13411-7:2006+A1:2008: EEN 13411-7:2006+A1:2008 (E) 2 Contents Page Foreword3 Introduction .4 1 S

12、cope 5 2 Normative references 5 3 Terms and definitions .6 4 List of significant hazards 6 5 Safety requirements and/or measures 7 6 Verification of safety requirements8 7 Information for use 11 Annex A (informative) Construction and sizes for one design of symmetric wedge socket with welded socket

13、body.13 Annex B (informative) Recommendations for safe use and inspection of symmetric wedge sockets conforming to Annex A, to be provided by the manufacturer16 Annex ZA (informative) Relationship between this European Standard and the Essential Requirements of EU Directive 95/16/EC 18 Annex ZB (inf

14、ormative) Relationship between this European Standard and the Essential Requirements of EU Directive 98/37/EC 19 Annex ZC (informative) !Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC“.20 Bibliography 21 BS EN 13411-7:2006+A1:2008EN 13411-7:2006

15、+A1:2008 (E) 3 Foreword This document (EN 13411-7:2006+A1:2008) has been prepared by Technical Committee CEN/TC 168 “Chains, ropes, webbing, slings and accessories - Safety”, the secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by p

16、ublication of an identical text or by endorsement, at the latest by April 2009, and conflicting national standards shall be withdrawn at the latest by December 2009. This document supersedes EN 13411-7:2006. This document includes Amendment 1, approved by CEN on 2008-09-18. The start and finish of t

17、ext introduced or altered by amendment is indicated in the text by tags !“. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). !For relationship with EU Directive(s),

18、 see informative Annexes ZA, ZB and ZC, which are integral parts of this document.“ EN 13411 consists of the following parts: Part 1: Thimbles for steel wire rope slings Part 2: Splicing of eyes for steel wire rope slings Part 3: Ferrules and ferrule-securing Part 4: Metal and resin socketing Part 5

19、: U-bolt wire rope grips Part 6: Asymmetric wedge socket Part 7: Symmetric wedge socket According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic

20、, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. BS EN 13411-7:2006:+A1:2008EN 13411-7:2006+A1:2008 (E) 4 In

21、troduction This European Standard is a type C standard as stated in EN 12100. This European Standard has been prepared to provide a means of conforming with the essential safety requirements of the Machinery Directive and the Lift Directive and associated EFTA regulations. The wedge socket concerned

22、 and the extent to which hazards, hazardous situations and events are covered are indicated in the scope of this standard part of the standard. When provisions of this type C standard are different from those which are stated in type A or B standards, the provisions of this type C standard take prec

23、edence over the provisions of the other standards for symmetric wedge sockets that have been designed and produced according to the provisions of this type C standard. Purchasers ordering to this standards are advised to specify in their purchasing contract that the supplier operates a quality assur

24、ance system applicable to the relevant part of this standard (e.g. EN ISO 9001) to ensure themselves that products claiming to comply consistently achieve the required level of quality. BS EN 13411-7:2006+A1:2008EN 13411-7:2006+A1:2008 (E) 5 1 Scope This European Standard specifies the minimum requi

25、rements for symmetrical wedge socket terminations for stranded steel wire ropes conforming to EN 12385-5 for lifts. This European Standard covers those symmetric wedge sockets intended for use at temperatures between -20 C and 100 C. This European Standard only covers those symmetric wedge sockets t

26、hat have welded socket bodies. An example of the construction and sizes of a symmetric wedge socket is given in informative Annex A. The informative Annex B gives the recommendations for the safe use and inspection of symmetric wedge socket according to Annex A. This European Standard deals with all

27、 significant hazards, hazardous situations and events relevant to symmetric wedge sockets for terminations for steel wire ropes, when used as intended and under conditions of misuse which are reasonable foreseeable by the manufacturer. The hazards covered by this European Standard are identified in

28、Clause 4. This European Standard applies to symmetric wedge sockets, which are manufactured after the date of its publication. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For u

29、ndated references, the latest edition of the referenced document (including any amendments) applies. EN 1050:1996, Safety of machinery Principles for risk assessment EN 1289:1998, Non-destructive testing of welds Penetrant testing of welds Acceptance levels EN 1290:1998, Non-destructive examination

30、of welds Magnetic particle examination of welds EN 10045-1, Metallic materials Charpy impact test Part 1: Test method EN 12385-2:2002, Steel wire ropes Safety Part 2: Definitions, designation and classification EN 12385-5:2002, Steel wire ropes Safety Part 5: Stranded ropes for lifts EN ISO 4063, We

31、lding and allied processes - Nomenclature of processes and reference numbers (ISO 4063:1998) EN ISO 5817, Welding Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) Quality levels for imperfections (ISO 5817:2003) EN ISO 7500-1:2004, Metallic materials Verificat

32、ion of static uniaxial testing machines Part 1: Tension/compression testing machines Verification and calibration of the force-measuring system (ISO 7500-1:2004) ) EN ISO 12100-1:2003, Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology (ISO 12100

33、-1:2003) EN ISO 12100-2:2003, Safety of machinery Basic concepts, general principles for design Part 2: Technical principles (ISO 12100-2:2003) BS EN 13411-7:2006:+A1:2008EN 13411-7:2006+A1:2008 (E) 6 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN IS

34、O 12100-1:2003, EN ISO 12100-2:2003, EN 12385-2:2002 and the following apply. 3.1 symmetric wedge socket assembly consisting of a socket body, wedge, and pin and securing means for the pin; when assembled the centre line of the pin is marginally offset (by one half rope diameter, see Figure B.1) to

35、the longitudinal axis of the live portion of the rope 3.2 socket body principal component of a wedge socket termination having an internal tapered form suitable for receiving a wedge (see 3.3) and the rope with which the wedge is associated, see Figure A.1 3.3 wedge flat tapered component with perip

36、heral groove, suitable for fitting into a tapered socket body to accommodate a rope of matching nominal diameter, see Figure A.1 3.4 pin removable component intended to facilitate connection of the socket body to its anchorage point 3.5 lot number of symmetric wedge sockets from which samples are se

37、lected for testing purposes which are of the same type and dimension, each of their constituent components manufactured during the same production run from material of the same cast and subjected to the same heat treatment process 4 List of significant hazards This European Standard contains all the

38、 significant hazards, hazardous situations and events, as far as they are dealt with in this European Standard, identified by risk assessment as significant for this type of steel wire rope termination that require action to eliminate or reduce the risk. In particular, the hazard caused by accidenta

39、l release of a load, or release of a load due to failure of a symmetric wedge socket, puts at risk, either directly or indirectly, the safety or health of those persons within the hazard zone. Errors in the fitting of accessories can also lead to premature failure and this European Standard contains

40、 dimensional and geometrical requirements to allow correct fit. Table 1 contains those hazards that require action to reduce risk identified by risk assessment as being specific and significant for symmetric wedge sockets. BS EN 13411-7:2006+A1:2008EN 13411-7:2006+A1:2008 (E) 7 Table 1 Hazards and a

41、ssociated requirements Hazards identified in Annex A of EN 1050:1996 Relevant clause of this Part of EN 13411 1.1.5 5 Mechanical hazard due to inadequacy of strength 6 7 1.3 Cutting or shearing hazard 7 15 Errors of fitting 7 5 Safety requirements and/or measures 5.1 Geometry of wedge and socket bod

42、y Symmetric wedge socket terminations for ropes shall conform to the following geometrical criteria (see Figure A.1): the wedge groove angle () shall be the same as the socket angle in the body (); the wedge shall be symmetric; the internal side surfaces of the socket body and the wedge in contact w

43、ith the rope shall be straight; the grooves of the body and the wedge shall have no surface irregularities, such as, protrusions or joints which could influence the intimate contact with the rope; the clamping length between the socket body and the wedge shall be at least 7,3 times the nominal rope

44、diameter d; the radius r3of the wedge at the bottom of the groove at the large end shall be at least 1 times the nominal diameter d of the rope. 5.2 Security of the pin The pin shall be provided with a means for securing it in position when in operation. 5.3 Welded socket body The welding and allied

45、 process shall conform to one of those specified in EN ISO 4063. The person who supervises the production process shall be trained in the chosen welding process. The quality of the welding joint shall be in accordance with assessment group B of EN ISO 5817:2003. There shall be no melted on weld chip

46、s. The ligament distance in the root of the welding joint shall be 1 mm for material thickness up to 6 mm and 1,5 mm for material thickness more than 6 mm up to and including 12 mm. The penetration of the root of the welding shall be avoided. There shall be no increase of the welding joint in the ar

47、ea of contact with the rope. The welding joint shall have a bonding area of at least 70 % at the joint edge. BS EN 13411-7:2006:+A1:2008EN 13411-7:2006+A1:2008 (E) 8 Any offset of the edges of the body halves shall be limited to 0,5 mm for material thickness up to 6 mm and 0,8 mm for material thickn

48、ess more than 6 mm up to and including 12 mm. 5.4 Mechanical properties 5.4.1 General The required mechanical properties take into account, that symmetric wedge sockets in combination with stranded ropes for lifts to EN 12385-5 have to be used with a minimum coefficient of use of 5 for lifting goods

49、 and 10 for lifting of persons. 5.4.2 Termination efficiency When tested in accordance with 6.2.2 the efficiency of the assembled termination shall be at least 80 % of the minimum breaking force of the rope without any movement between the rope and the termination and any deformation of the wedge and the socket. 5.4.3 Fatigue behaviour of the socket body and pin When tested in accordance with 6.2.3 the socket body, wedge and pin shall not exhibit any indications of cracks after 75 000 load cycles. The socket and