EN 12310-2-2000 en Flexible Sheets for Waterproofing - Determination of Resistance to Tearing - Part 2 Plastic and Rubber Sheets for Roof Waterproofing《防水韧性板 抗撕裂性测定(钉杆) 第2部分 屋顶防水用塑.pdf

《EN 12310-2-2000 en Flexible Sheets for Waterproofing - Determination of Resistance to Tearing - Part 2 Plastic and Rubber Sheets for Roof Waterproofing《防水韧性板 抗撕裂性测定(钉杆) 第2部分 屋顶防水用塑.pdf》由会员分享，可在线阅读，更多相关《EN 12310-2-2000 en Flexible Sheets for Waterproofing - Determination of Resistance to Tearing - Part 2 Plastic and Rubber Sheets for Roof Waterproofing《防水韧性板 抗撕裂性测定(钉杆) 第2部分 屋顶防水用塑.pdf（9页珍藏版）》请在麦多课文档分享上搜索。

1、I Lb24bb9 0878360 O76 W BRITISH STANDARD BS EN 12310-2:2000 Flexible sheets for waterproofing - Determination of resistance to tearing - Part 2: Plastic and rubber sheets for roof waterproofing The European Stanard EN 12310-2:2000 has the status of a British Standard ICs 91.100.60 NO COPYING WLTBOUT

2、 BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW I Lh24bb 08783bL TO2 W BS EN 12310-2:2000 This British Standard, having been prepared under the direction of the Sector Committee for Building and Civil Engineering, was published under the authority of the Standards Committee and comes into effec

3、t on 15 November 2000 National foreword This British Standard is the official English language veision of EN 1231-22. The UK participation in its preparation was entrusted by Technical Committee B/546, Flexible sheets for waterproofing, to Subcommittee B/546/2, Roof sheeting and seaiing sheeting, wh

4、ich has the responsibility to: - aid enquireis to understand the tea - present to the responsible European committee any enquiries on the - monitor related international and European developments and promulgate interpretation, or proposals for change, and keep the UK interests informed; them in the

5、UK. A list of organizations represented on this subcommittee can be obtained on request to its secrem. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Standards Catalogue under the section entitled “In

6、temational Standards Correspondence Index“, or by using the “Find“ faciiity of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with

7、a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, the EN titie page, pages 2 to 6, an inside back cover and a back cover. The BSI copyright notice displayed in this document indicates when the

8、document was last issued. Amendments issued since publication O BSI 11-2000 ISBN O 580 36470 4 E 1624bb9 0878362 949 H EUROPEAN STANDARD EN 1231 b) all details necessary to identify the product tested; c) information on sampling in accordance with clause 6; d) details of preparation of the test spec

9、imen in accordance with clause 7; e) the test results in accordance with clause 9 ; f) any peculiarities in the method employed or encountered during the test; g) the date of the test(s). BS EN 12310-2:2000 BSI 389 Chiswick High Road London w4 4AI.4 M Lb24bb9 08783b8 367 I BSI - British Standards In

10、stitution BSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions British Standards are updated by amendment or revision. Users of British Stan- sho

11、uld make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quaiity of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical commit

12、tee responsible, the identity of which can be found on the inside front cover. Tek O20 8996 9OOO. Fax O20 8996 7400. BSI offers members an individual updating service ded PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards orders for all BSI,

13、international and foreign standards publications should be addressed to Customer Services. Tel 020 8996 9001. Fax: 020 8996 7001. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British standards, unless otherw

14、ise requested. Information on standards BSI provides a wide range of information on naonal, European and international standards through its Libmy and its Technical Help to Exporters Service. Various BSI electronic infomation services are also available which give details on all its products and ser

15、vices. Contact the Information Centre. Tel O20 8996 7111. Fax: O20 8996 7048. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Am on Tel: 020 899

16、6 7002. Fax 020 8996 7001. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a r

17、etried system or transmitted in any form or by any means - electronic, photocopying, recording or otherwise - without prior written permission hm BSI. This does not preclude the free use, in the com of implementing the standard, of necessary details such as symbols, and size, type or grade designati

18、ons. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained If permission is granted, the terms may include royalty payments or a licensing agreement. Details and advice can be obtained from the Copyright Manager. Tel 020 8996 7070.