DLA SMD-5962-90809 REV F-2013 MICROCIRCUIT LINEAR JFET MICROPOWER QUAD OPERATIONAL AMPLIFIER MONOLITHIC SILICON.pdf

《DLA SMD-5962-90809 REV F-2013 MICROCIRCUIT LINEAR JFET MICROPOWER QUAD OPERATIONAL AMPLIFIER MONOLITHIC SILICON.pdf》由会员分享，可在线阅读，更多相关《DLA SMD-5962-90809 REV F-2013 MICROCIRCUIT LINEAR JFET MICROPOWER QUAD OPERATIONAL AMPLIFIER MONOLITHIC SILICON.pdf（14页珍藏版）》请在麦多课文档分享上搜索。

1、 REVISIONS LTR DESCRIPTION DATE (YR-MO-DA) APPROVED A Add case outline “D”. Make changes to 1.3, 1.4, table I, and figure 1. In accordance with N.O.R. 5962-R009-94. 93-10-19 M. A. FRYE B Add device type 02. Make changes to 1.2.2, 1.2.4, table I, table II, and figure 1. Redrawn. 94-06-17 M. A. FRYE C

2、 Add device type 03. Make changes to 1.2.2, table I, and figure 1. 94-09-08 M. A. FRYE D Drawing updated to reflect current requirements. -ro 01-08-27 R. MONNIN E Drawing updated as part of 5 year review. -rrp 06-11-21 R. MONNIN F Update drawing to current MIL-PRF-38535 requirements. -jt 13-07-01 C.

3、 SAFFLE THE ORIGINAL FIRST SHEET OF THIS DRAWING HAS BEEN REPLACED. REV SHEET REV SHEET REV STATUS REV F F F F F F F F F F F F F OF SHEETS SHEET 1 2 3 4 5 6 7 8 9 10 11 12 13 PMIC N/A PREPARED BY RICK C. OFFICER DLA LAND AND MARITIME COLUMBUS, OHIO 43218-3990 http:/www.landandmaritime.dla.mil STANDA

4、RD MICROCIRCUIT DRAWING THIS DRAWING IS AVAILABLE FOR USE BY ALL DEPARTMENTS AND AGENCIES OF THE DEPARTMENT OF DEFENSE CHECKED BY CHARLES E. BESORE APPROVED BY MICHAEL A. FRYE MICROCIRCUIT, LINEAR, JFET, MICROPOWER, QUAD, OPERATIONAL AMPLIFIER, MONOLITHIC SILICON DRAWING APPROVAL DATE 90-07-17 AMSC

5、N/A REVISION LEVEL F SIZE A CAGE CODE 67268 5962-90809 SHEET 1 OF 13 DSCC FORM 2233 APR 97 5962-E464-13 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-90809 DLA LAND AND MARITIME COLUMBUS, OHIO 43218-3990 RE

6、VISION LEVEL F SHEET 2 DSCC FORM 2234 APR 97 1. SCOPE 1.1 Scope. This drawing documents two product assurance class levels consisting of high reliability (device classes Q and M) and space application (device class V). A choice of case outlines and lead finishes are available and are reflected in th

7、e Part or Identifying Number (PIN). When available, a choice of Radiation Hardness Assurance (RHA) levels is reflected in the PIN. 1.2 PIN. The PIN is as shown in the following example: 5962 - 90809 01 M C A Federal stock class designator RHA designator (see 1.2.1) Device type (see 1.2.2) Device cla

8、ss designator Case outline (see 1.2.4) Lead finish (see 1.2.5) / (see 1.2.3) / Drawing number 1.2.1 RHA designator. Device classes Q and V RHA marked devices meet the MIL-PRF-38535 specified RHA levels and are marked with the appropriate RHA designator. Device class M RHA marked devices meet the MIL

9、-PRF-38535, appendix A specified RHA levels and are marked with the appropriate RHA designator. A dash (-) indicates a non-RHA device. 1.2.2 Device types. The device types identify the circuit function as follows: Device type Generic number Circuit function 01 TLE2064 JFET input, high-output-drive m

10、icropower quad operational amplifier 02 TLE2064A JFET input, high-output-drive micropower quad operational amplifier 03 TLE2064B JFET input, high-output-drive micropower quad operational amplifier 1.2.3 Device class designator. The device class designator is a single letter identifying the product a

11、ssurance level as follows: Device class Device requirements documentation M Vendor self-certification to the requirements for MIL-STD-883 compliant, non-JAN class level B microcircuits in accordance with MIL-PRF-38535, appendix A Q or V Certification and qualification to MIL-PRF-38535 1.2.4 Case out

12、lines. The case outlines are as designated in MIL-STD-1835 and as follows: Outline letter Descriptive designator Terminals Package style C GDIP1-T14 or CDIP2-T14 14 Dual-in-line D GDFP1-F14 or CDFP2-F14 14 Flat pack 2 CQCC1-N20 20 Square leadless chip carrier 1.2.5 Lead finish. The lead finish is as

13、 specified in MIL-PRF-38535 for device classes Q and V or MIL-PRF-38535, appendix A for device class M. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-90809 DLA LAND AND MARITIME COLUMBUS, OHIO 43218-3990 RE

14、VISION LEVEL F SHEET 3 DSCC FORM 2234 APR 97 1.3 Absolute maximum ratings. 1/ Positive supply voltage (+VCC) +19 V 2/ Negative supply voltage (-VCC) . -19 V Differential input voltage 38 V 3/ Input voltage range, (VI) (any input) VCC2/ Input current (II) (each input) . 1 mA Output current (IO) (each

15、 output) . 80 mA Total current into +VCCterminal 80 mA Total current into VCCterminal 80 mA Duration of short circuit current at or below +25C Unlimited 4/ Power dissipation (PD): Cases C and 2 . 1375 mW 5/ Case D . 675 mW 5/ Junction temperature (TJ) +150C Storage temperature range -65C to +150C Ca

16、se temperature for 60 seconds: (case 2) . +260C Lead temperature 1.6 mm (1/16) from case for 60 seconds: Case C . +300C Thermal resistance, junction-to-ambient (JA) . See MIL-STD-1835 1.4 Recommended operating conditions. Supply voltage (VCC) . 3.5 V minimum, 18 V maximum Common-mode input voltage (

17、VIC): VCC= 5 V . -1.6 V minimum, 4 V maximum VCC= 15 V . -11 V minimum, 13 V maximum Operating free-air temperature range (TA) -55C to +125C 2. APPLICABLE DOCUMENTS 2.1 Government specification, standards, and handbooks. The following specification, standards, and handbooks form a part of this drawi

18、ng to the extent specified herein. Unless otherwise specified, the issues of these documents are those cited in the solicitation or contract. DEPARTMENT OF DEFENSE SPECIFICATION MIL-PRF-38535 - Integrated Circuits, Manufacturing, General Specification for. DEPARTMENT OF DEFENSE STANDARDS MIL-STD-883

19、 - Test Method Standard Microcircuits. MIL-STD-1835 - Interface Standard Electronic Component Case Outlines. 1/ Stresses above the absolute maximum rating may cause permanent damage to the device. Extended operation at the maximum levels may degrade performance and affect reliability. 2/ All voltage

20、 values, except different voltages, are with respect to the midpoint between +VCCand VCC. 3/ Differential voltages are at the noninverting input with respect to the inverting input. 4/ The output may be shorted to either supply. Temperature and/or supply must be limited to ensure that the maximum di

21、ssipation rating is not exceeded. 5/ Above TA= +25C, derate at a factor of 11 mW/C for cases C and 2. Above TA= +25C, derate at a factor of 8 mW/C for case D. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-9

22、0809 DLA LAND AND MARITIME COLUMBUS, OHIO 43218-3990 REVISION LEVEL F SHEET 4 DSCC FORM 2234 APR 97 DEPARTMENT OF DEFENSE HANDBOOKS MIL-HDBK-103 - List of Standard Microcircuit Drawings. MIL-HDBK-780 - Standard Microcircuit Drawings. (Copies of these documents are available online at http:/quicksear

23、ch.dla.mil/ or from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094.) 2.2 Order of precedence. In the event of a conflict between the text of this drawing and the references cited herein, the text of this drawing takes precedence. Nothing in this

24、 document, however, supersedes applicable laws and regulations unless a specific exemption has been obtained. 3. REQUIREMENTS 3.1 Item requirements. The individual item requirements for device classes Q and V shall be in accordance with MIL-PRF-38535 and as specified herein or as modified in the dev

25、ice manufacturers Quality Management (QM) plan. The modification in the QM plan shall not affect the form, fit, or function as described herein. The individual item requirements for device class M shall be in accordance with MIL-PRF-38535, appendix A for non-JAN class level B devices and as specifie

26、d herein. 3.2 Design, construction, and physical dimensions. The design, construction, and physical dimensions shall be as specified in MIL-PRF-38535 and herein for device classes Q and V or MIL-PRF-38535, appendix A and herein for device class M. 3.2.1 Case outlines. The case outlines shall be in a

27、ccordance with 1.2.4 herein. 3.2.2 Terminal connections. The terminal connections shall be as specified on figure 1. 3.3 Electrical performance characteristics and postirradiation parameter limits. Unless otherwise specified herein, the electrical performance characteristics and postirradiation para

28、meter limits are as specified in table I and shall apply over the full ambient operating temperature range. 3.4 Electrical test requirements. The electrical test requirements shall be the subgroups specified in table II. The electrical tests for each subgroup are defined in table I. 3.5 Marking. The

29、 part shall be marked with the PIN listed in 1.2 herein. In addition, the manufacturers PIN may also be marked. For packages where marking of the entire SMD PIN number is not feasible due to space limitations, the manufacturer has the option of not marking the “5962-“ on the device. For RHA product

30、using this option, the RHA designator shall still be marked. Marking for device classes Q and V shall be in accordance with MIL-PRF-38535. Marking for device class M shall be in accordance with MIL-PRF-38535, appendix A. 3.5.1 Certification/compliance mark. The certification mark for device classes

31、Q and V shall be a “QML“ or “Q“ as required in MIL-PRF-38535. The compliance mark for device class M shall be a “C“ as required in MIL-PRF-38535, appendix A. 3.6 Certificate of compliance. For device classes Q and V, a certificate of compliance shall be required from a QML-38535 listed manufacturer

32、in order to supply to the requirements of this drawing (see 6.6.1 herein). For device class M, a certificate of compliance shall be required from a manufacturer in order to be listed as an approved source of supply in MIL-HDBK-103 (see 6.6.2 herein). The certificate of compliance submitted to DLA La

33、nd and Maritime-VA prior to listing as an approved source of supply for this drawing shall affirm that the manufacturers product meets, for device classes Q and V, the requirements of MIL-PRF-38535 and herein or for device class M, the requirements of MIL-PRF-38535, appendix A and herein. 3.7 Certif

34、icate of conformance. A certificate of conformance as required for device classes Q and V in MIL-PRF-38535 or for device class M in MIL-PRF-38535, appendix A shall be provided with each lot of microcircuits delivered to this drawing. 3.8 Notification of change for device class M. For device class M,

35、 notification to DLA Land and Maritime -VA of change of product (see 6.2 herein) involving devices acquired to this drawing is required for any change that affects this drawing. 3.9 Verification and review for device class M. For device class M, DLA Land and Maritime, DLA Land and Maritimes agent, a

36、nd the acquiring activity retain the option to review the manufacturers facility and applicable required documentation. Offshore documentation shall be made available onshore at the option of the reviewer. 3.10 Microcircuit group assignment for device class M. Device class M devices covered by this

37、drawing shall be in microcircuit group number 61 (see MIL-PRF-38535, appendix A). Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-90809 DLA LAND AND MARITIME COLUMBUS, OHIO 43218-3990 REVISION LEVEL F SHEET 5

38、 DSCC FORM 2234 APR 97 TABLE I. Electrical performance characteristics. Test Symbol Conditions -55C TA +125C unless otherwise specified Group A subgroups Device type Limits Unit Min Max Input offset voltage VIOVCC= 5 V, VIC= 0 V, 1 01 7 mV RS= 50 02 6 03 3.5 2,3 01 9 02 8 03 5.5 VCC= 15 V, VIC= 0 V,

39、 1 01 6 RS= 50 02 4 03 2 2,3 01 8 02 6 03 4 Input offset current IIOVCC= 5 V, 15 V, VIC= 0 V, RS= 50 , TA= +125C, -55C 2,3 All 20 nA Input bias current IIBVCC= 5 V, 15 V, VIC= 0 V, RS= 50 , TA= +125C, -55C 2,3 All 40 nA Common mode input voltage range VICRVCC= 5 V 1,2,3 All -1.6 to 4 V VCC= 15 V -11

40、 to 13 See footnotes at end of table. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-90809 DLA LAND AND MARITIME COLUMBUS, OHIO 43218-3990 REVISION LEVEL F SHEET 6 DSCC FORM 2234 APR 97 TABLE I. Electrical p

41、erformance characteristics Continued. Test Symbol Conditions -55C TA +125C unless otherwise specified Group A subgroups Device type Limits Unit Min Max Maximum positive peak output voltage swing +VOMVCC= 5 V, RL= 10 k 1 All 3.5 V 2,3 3 VCC= 5 V, RL= 600 1 2.5 2,3 2 VCC= 15 V, RL= 10 k 1 13.2 2,3 12.

42、5 VCC= 15 V, RL= 600 1 12.5 2,3 11 Maximum negative peak output voltage swing -VOMVCC= 5 V, RL= 10 k 1 All -3.7 V 2,3 -3 VCC= 5 V, RL= 600 1 -2.5 2,3 -2 VCC= 15 V, RL= 10 k 1 -13.2 2,3 -12.5 VCC= 15 V, RL= 600 1 -12.5 2,3 -11 See footnotes at end of table. Provided by IHSNot for ResaleNo reproductio

43、n or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-90809 DLA LAND AND MARITIME COLUMBUS, OHIO 43218-3990 REVISION LEVEL F SHEET 7 DSCC FORM 2234 APR 97 TABLE I. Electrical performance characteristics Continued. Test Symbol Conditions -55C TA +125C unless

44、 otherwise specified Group A subgroups Device type Limits Unit Min Max Large signal differential voltage amplification AVDVCC= 5 V, RL= 10 k, 1 All 15 V/mV VO= 2.8 V 2,3 2 VCC= 5 V, RL= 600 , 1 1 VO= 0 V to 2.5 V, 2,3 0.5 VCC= 5 V, RL= 600 , 1 1 VO= 0 V to -2.5 V, 2,3 0.5 VCC= 15 V, RL= 10 k, 1 30 V

45、O= 10 V 2,3 20 VCC= 15 V, RL= 600 , 1 25 VO= 0 V to 8 V, 2,3 7 VCC= 15 V, RL= 600 , 1 3 VO= 0 V to -8 V, 2,3 1 Common mode rejection ratio CMRR VCC= 5 V, RS= 50 , 1 All 65 dB VIC= VICRminimum 2,3 60 VCC= 15 V, RS= 50 , 1 72 VIC= VICRminimum 2,3 65 Supply voltage rejection ratio (VCC/ VIO) kSVRVCC= 5

46、 V to 15 V, 1 All 75 dB RS= 50 2,3 65 See footnotes at end of table. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-90809 DLA LAND AND MARITIME COLUMBUS, OHIO 43218-3990 REVISION LEVEL F SHEET 8 DSCC FORM 22

47、34 APR 97 TABLE I. Electrical performance characteristics Continued. Test Symbol Conditions -55C TA +125C unless otherwise specified Group A subgroups Device type Limits Unit Min Max Supply current ICCVCC= 5 V, VO= 0 V, no load 1,2,3 All 1.3 mA VCC= 15 V, VO= 0 V, 1 1.4 no load 2,3 1.5 Slew rate at

48、unity gain 1/ SR VCC= 15 V, RS= 10 k, 4 All 2.6 V/s CL= 100 pF 5,6 1.8 1/ See figure 2. 4. VERIFICATION 4.1 Sampling and inspection. For device classes Q and V, sampling and inspection procedures shall be in accordance with MIL-PRF-38535 or as modified in the device manufacturers Quality Management (QM) plan. The modification in the QM plan shall not affect the form, fit, or function as described here