DLA MIL-PRF-123 18 C-2011 CAPACITORS FIXED CERAMIC DIELECTRIC (GENERAL PURPOSE) HIGH RELIABILITY LEADED STYLE CKS24.pdf

《DLA MIL-PRF-123 18 C-2011 CAPACITORS FIXED CERAMIC DIELECTRIC (GENERAL PURPOSE) HIGH RELIABILITY LEADED STYLE CKS24.pdf》由会员分享，可在线阅读，更多相关《DLA MIL-PRF-123 18 C-2011 CAPACITORS FIXED CERAMIC DIELECTRIC (GENERAL PURPOSE) HIGH RELIABILITY LEADED STYLE CKS24.pdf（3页珍藏版）》请在麦多课文档分享上搜索。

1、 AMSC N/A FSC 5910 MIL-PRF-123/18C 19 August 2011 SUPERSEDING MIL-PRF-123/18B 26 April 2007 PERFORMANCE SPECIFICATION SHEET CAPACITORS, FIXED, CERAMIC DIELECTRIC, (GENERAL PURPOSE), HIGH RELIABILITY, LEADED, STYLE CKS24 This specification sheet is approved for use by all Departments and Agencies of

2、the Department of Defense. The requirements for acquiring the product described herein shall consist of this specification sheet and MIL-PRF-123. FIGURE 1. Style CKS24 capacitors. INCH-POUND Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-PRF-123

3、/18C 2 NOTES: 1. Dimensions are in inches. 2. Metric equivalents are given for general information. 3. Leads shall be centered within .005 (0.13 mm). 4. The angle shall be 95 +10, -5. 5. The distance between the centers of the mounting holes will be .300 .010 inch (7.62 0.25 mm). 6. Nonconductive ma

4、terial shall not extend beyond .030 inch (0.76 mm) from the edge of the capacitor body. FIGURE 1. Style CKS24 capacitors - Continued. REQUIREMENTS: Dimensions and configuration: See figure 1. Case type: Molded plastic, encapsulated. Lead wire: Type C of MIL-PRF-123. Capacitance value: See table I. C

5、apacitance tolerance: See table I. Operating temperature: -55C to +125C. Voltage-temperature limits: BR and BX characteristics. Voltage rating: See table I. Pre-encapsulation terminal strength: In accordance with MIL-PRF-123. Marking: In accordance with MIL-PRF-123, example 6. Inches mm Inches mm In

6、ches mm .004 .006 .007 .010 .012 .015 0.10 0.15 0.18 0.25 0.30 0.38 .019 .020 .028 .035 .058 .090 0.48 0.51 0.71 0.89 1.47 2.29 .092 .148 .260 .283 .320 .325 2.34 3.76 6.60 7.19 8.13 8.26 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-PRF-123/18

7、C 3 TABLE I. Style CKS24 characteristics. Part or Identifying Number (PIN) 1/ Capacitance (pF) Voltage-temperature limits Capacitance tolerance Rated voltage (V dc) M123A18BRC124KC 120,000 BR K, M 100 M123A18BRC154-C 150,000 BR K, M 100 M123A18BRB184KC 180,000 BR K, M 50 M123A18BRB224-C 220,000 BR K

8、, M 50 M123A18B-B274-C 270,000 BX, BR K, M 50 M123A18B-B334-C 330,000 BX, BR K, M 50 M123A18B-B394-C 390,000 BX, BR K, M 50 M123A18B-B474-C 470,000 BX, BR K, M 50 M123A18BXB564-C 560,000 BX K, M 50 M123A18BXB684-C 680,000 BX K, M 50 M123A18BXB824-C 820,000 BX K, M 50 M123A18BXB105-C 1,000,000 BX K,

9、M 50 1/ The complete PIN will include additional letters to indicate voltage-temperature limits and capacitance tolerance, as applicable. Changes from previous issue: The margins of this specification sheet are marked with vertical lines to indicate where changes from the previous issue were made. T

10、his was done as a convenience only and the Government assumes no liability whatsoever for any inaccuracies in these notations. Bidders and contractors are cautioned to evaluate the requirements of this document based on the entire content irrespective of the marginal notations and relationship to th

11、e last previous issue. Custodians: Preparing activity: Navy - EC DLA - CC Air Force - 19 DLA - CC (Project 5910-2011-029) NASA - NA Review activities: Air Force 85 NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using ASSIST Online database at https:/assist.daps.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-