DIN EN ISO 12001-2010 Acoustics - Noise emitted by machinery and equipment - Rules for the drafting and presentation of a noise test code (ISO 12001 1996) German version EN ISO 120.pdf

《DIN EN ISO 12001-2010 Acoustics - Noise emitted by machinery and equipment - Rules for the drafting and presentation of a noise test code (ISO 12001 1996) German version EN ISO 120.pdf》由会员分享，可在线阅读，更多相关《DIN EN ISO 12001-2010 Acoustics - Noise emitted by machinery and equipment - Rules for the drafting and presentation of a noise test code (ISO 12001 1996) German version EN ISO 120.pdf（25页珍藏版）》请在麦多课文档分享上搜索。

1、January 2010DEUTSCHE NORM English price group 14No part of this standard may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 17.140.20!$V“1565191ww

2、w.din.deDDIN EN ISO 12001Acoustics Noise emitted by machinery and equipment Rules for the drafting and presentation of a noise test code(ISO 12001:1996)English version of DIN EN ISO 12001:2010-01Akustik Geruschabstrahlung von Maschinen und Gerten Regeln fr die Erstellung und Gestaltung einer Gerusch

3、messnorm (ISO 12001:1996)Englische Fassung DIN EN ISO 12001:2010-01SupersedesDIN EN ISO 12001:1997-07www.beuth.deDocument comprises 25 pagesDIN EN ISO 12001:2010-01 2 National foreword This standard has been prepared by Technical Committee ISO/TC 43 “Acoustics”, Subcommittee SC 1 “Noise” (Secretaria

4、t: DS, Denmark), Working Group WG 28 “Basic machinery noise emission standards” in collaboration with Technical Committee CEN/TC 211 “Acoustics” (Secretariat: DS, Denmark). The responsible German body involved in its preparation was the Normenausschuss Akustik, Lrmminderung und Schwingungstechnik im

5、 DIN und VDI (Acoustics, Noise Control and Vibration Engineering Standards Committee in DIN and VDI), Working Committee NA 001-01-04 AA Geruschemission von Maschinen und Anlagen; Messung, Minderung, Datensammlung. The DIN Standards corresponding to the International Standards referred to in this doc

6、ument are shown below. The IEC numbers are listed in the currently valid five-digit versions, although they are cited in the text by their last three digits only (i.e. without “60”). ISO 1996-1 DIN 45645-1 ISO 9614-1 DIN EN ISO 9614-1 ISO 2204 DIN EN ISO 12001 ISO 9614-2 DIN EN ISO 9614-2 ISO 3740 D

7、IN EN ISO 3740 ISO 11200 DIN EN ISO 11200 ISO 3741 DIN EN ISO 3741 ISO 11201 DIN EN ISO 11201 ISO 3743-1 DIN EN ISO 3743-1 ISO 11202 DIN EN ISO 11202 ISO 3743-2 DIN EN ISO 3743-2 ISO 11203 DIN EN ISO 11203 ISO 3744 DIN EN ISO 3744 ISO 11204 DIN EN ISO 11204 ISO 3745 DIN EN ISO 3745 ISO/TR 11690-3 VD

8、I 3760 ISO 3746 DIN EN ISO 3746 DIN EN ISO 11690-3 ISO 3747 DIN EN ISO 3747 IEC 60651 DIN EN 61672 (all parts) ISO 4871 DIN EN ISO 4871 IEC 60804 DIN EN 61672 (all parts) ISO 7574-1 DIN EN 27574-1 IEC 61043 DIN EN 61043 ISO 7574-2 DIN EN 27574-2 IEC 61260 DIN EN 61260 ISO 7574-4 DIN EN 27574-4 The n

9、ational standards are given in Annex NA “Bibliography”. Amendments This standard differs from DIN EN ISO 12001:1997-07 as follows: a) Normative references and Bibliography have been updated. b) The standard has been brought in line with the current rules of presentation and orthography. c) Annex ZA

10、showing the relationship between the European Standard and the essential requirements of EU Directives has been deleted. d) Annex ZB relating to normative references to international publications with their relevant European publications has been deleted. Previous editions DIN EN ISO 12001: 1997-07

11、DIN EN ISO 12001:2010-01 3 National Annex NA (informative) Bibliography DIN 45645-1, Determination of rating levels from measurement data Part 1: Noise immission in the neighbourhood DIN EN 27574-1, Acoustics Statistical methods for determining and verifying stated noise emission values of machinery

12、 and equipment Part 1: General considerations and definitions DIN EN 27574-2, Acoustics Statistical methods for determining and verifying stated noise emission values of machinery and equipment Part 2: Methods for stated values for individual machines DIN EN 27574-4, Acoustics Statistical methods fo

13、r determining and verifying stated noise emission values of machinery and equipment Part 4: Methods for stated values for batches of machines DIN EN 61043, Electroacoustics Instruments for the measurement of sound intensity Measurement with pairs of pressure sensing microphones DIN EN 61260, Electro

14、acoustics Octave-band and fractional-octave-band filters DIN EN 61672-1, Electroacoustics Sound level meters Part 1: Specifications DIN EN 61672-2, Electroacoustics Sound level meters Part 2: Pattern evaluation tests DIN EN 61672-3, Electroacoustics Sound level meters Part 3: Periodic tests DIN EN I

15、SO 3740, Acoustics Determination of sound power levels of noise sources Guidelines for the use of basic standards DIN EN ISO 3741, Acoustics Determination of sound power levels of noise sources using sound pres-sure Precision methods for reverberation rooms DIN EN ISO 3743-1, Acoustics Determination

16、 of sound power levels of noise sources Engineering methods for small, movable sources in reverberant fields Part 1: Comparison method for hard-walled test rooms DIN EN ISO 3743-2, Acoustics Determination of sound power levels of noise sources using sound pressure Engineering methods for small, mova

17、ble sources in reverberant fields Part 2: Methods for special reverberation test rooms DIN EN ISO 3744, Acoustics Determination of sound power levels of noise sources using sound pressure Engineering method in an essential free field over a reflecting plane DIN EN ISO 3745, Acoustics Determination o

18、f sound power levels of noise sources using sound pres-sure Precision methods for anechoic and hemi-anechoic rooms DIN EN ISO 3746, Acoustics Determination of sound power levels of noise sources using sound pres-sure Survey method using an enveloping measurement surface over a reflecting plane DIN E

19、N ISO 3747, Acoustics Determination of sound power levels of noise sources using sound pres-sure Comparison method for use in situ DIN EN ISO 12001:2010-01 4 DIN EN ISO 4871, Acoustics Declaration and verification of noise emission values of machinery and equipment DIN EN ISO 9614-1, Acoustics Deter

20、mination of sound power levels of noise sources using sound intensity Part 1: Measurement at discrete points DIN EN ISO 9614-2, Acoustics Determination of sound power levels of noise sources using sound intensity Part 2: Measurement by scanning DIN EN ISO 11200, Acoustics Noise emitted by machinery

21、and equipment Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other speci-fied positions DIN EN ISO 11201, Acoustics Noise emitted by machinery and equipment Measurement of emission sound pressure levels at a work station and

22、 at other specified positions Engineering method in an essentially free field over a reflecting plane DIN EN ISO 11202, Acoustics Noise emitted by machinery and equipment Measurement of emission sound pressure levels at a work station and at other specified positions applying approximate environment

23、al corrections DIN EN ISO 11203, Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level DIN EN ISO 11204, Acoustics Noise emitted by machinery and equipment Measurement of emissi

24、on sound pressure levels at a work station and at other specified positions Method requiring environmental corrections DIN EN ISO 11690-3, Acoustics Recommended practice for the design of low-noise workplaces containing machinery Part 3: Sound propagation and noise prediction in workrooms VDI 3760,

25、Computation and measurement of sound propagation in workrooms EUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN ISO 12001August 2009ICS 17.140.20 Supersedes EN ISO 12001:1996 English VersionAcoustics - Noise emitted by machinery and equipment - Rulesfor the drafting and presentation of a noise test

26、code (ISO12001:1996)Acoustique - Bruit mis par les machines et quipements -Rgles pour la prparation et la prsentation dun codedessai acoustique (ISO 12001:1996)Akustik - Geruschabstrahlung von Maschinen undGerten - Regeln fr die Erstellung und Gestaltung einerThis European Standard was approved by C

27、EN on 3 August 2009.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards ma

28、y be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN

29、 Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands,

30、Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMIT EUROPEN DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNGManagement Centre: Avenue Marnix 17, B-1000 Brussels 2009 CEN All rights of exploitation in any form a

31、nd by any means reservedworldwide for CEN national Members.Ref. No. EN ISO 12001:2009: EGeruschmessnorm (ISO 12001:1996)Contents 2 DIN EN ISO 12001:2010-01 EN ISO 12001:2009 (E) Page Foreword .3 Introduction.4 1 Scope5 2 Normative references5 3 Definitions 6 4 Classification of different types of no

32、ise10 5 Classification of the accuracy grade of measurement methods10 5.1 Survey grade (grade 3)10 5.2 Engineering grade (grade 2)10 5.3 Precision grade (grade 1) 11 6 Selection of B-types standards for use in noise test codes.11 6.1 General .11 6.2 Methods for determining sound power levels11 6.3 M

33、ethods for the determination of emission sound pressure levels at work stations and at other specified positions11 6.4 Methods for declaring and verifying noise emission values12 6.5 Requirements with respect to the method and accuracy grade 12 7 Requirements for the contents of a noise test code .1

34、2 7.1 Description of a family of machines12 7.2 Noise emission 12 7.3 Installation and mounting conditions .13 7.4 Operating conditions 14 7.5 Measurement uncertainties14 7.6 Information to be recorded.15 7.7 Information to be reported .15 7.8 Declaration and verification of noise emission values .1

35、5 Annex A (normative) Basic noise emission standards.17 Annex B (normative) Items to be covered in a noise test code .19 Annex C (informative) Noise emission quantities 20 Annex D (informative) Bibliography21 Foreword The text of ISO 12001:1996 has been prepared by Technical Committee ISO/TC 43 “Aco

36、ustics” of the International Organization for Standardization (ISO) and has been taken over as EN ISO 12001:2009 by Technical Committee CEN/TC 211 “Acoustics” the secretariat of which is held by DS. This European Standard shall be given the status of a national standard, either by publication of an

37、identical text or by endorsement, at the latest by January 2010, and conflicting national standards shall be withdrawn at the latest by January 2010. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be

38、held responsible for identifying any or all such patent rights. This document supersedes EN ISO 12001:1996. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cy

39、prus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Endorsement notice The text of ISO

40、12001:1996 has been approved by CEN as a EN ISO 12001:2009 without any modification. 3 EN ISO 12001:2009 (E) DIN EN ISO 12001:2010-01 Introduction In the determination, declaration and verification of noise emission values for specific types of machinery and equipment, standardized noise test codes

41、are required for many purposes. Several basic International Standards dealing with the noise emitted by machinery and equipment exist. In order to prepare a noise test code for a specific family of machinery or equipment, it is necessary to select the most appropriate basic documents and to establis

42、h additional require- ments for that family (e.g. installation and mounting conditions, operating conditions, measurement positions, noise declarations, information to be recorded and reported, etc.). A noise test code is a standard for a specific family, sub-family or type of machinery or equipment

43、. Such a code gives all the information necessary to carry out as efficiently as possible the determination, declaration and verification of the noise emission characteristics of the machine under test. This International Standard specifies what information is necessary for the preparation of noise

44、test codes. 4 DIN EN ISO 12001:2010-01 EN ISO 12001:2009 (E) 1 Scope This International Standard specifies the technical re- quirements of a noise test code for a specific family of machinery or equipment. It is primarily applicable to stationary machinery and equipment, including hand-held tools, a

45、s well as those that present hazards due to mobility or load lifting. The purpose of a noise test code is to permit com- parable test results to be obtained on the noise emissions of machines from the same family, thus enabling users to make comparisons and to check the declared noise emission data.

46、 The quantities de- scribed in a noise test code are also useful for noise specifications in private contracts, for planning and for noise reduction purposes. Specific test codes for various types of machinery and equipment are established and used in accordance with the requirements of basic Intern

47、ational Stan- dards. Standardized noise test codes give detailed re- quirements on mounting, loading and operating conditions for the particular family to which the ma- chinery under test belongs, as well as the location of a work station(s) and other specified positions (if any). The purpose of thi

48、s International Standard is to assist technical standardization committees responsible for specific families of machinery or equipment in pre- paring noise test codes to ensure that such noise test codes - are as homogeneous as possible, with each indi- vidual test code having the same basic structu

49、re; - are in full accordance with basic standards on measurement, declaration and verification of noise emissions; and - reflect the latest technical knowledge of methods of determining the noise emissions from the specific family of machinery or equipment under consideration. NOTE 1 Annex A lists the basic International Standards to be used in the drafting of a noise test code. An outline of a typical noise test code summarizing the information th