DIN EN 15918-2017 Cycles - Cycle trailers - Safety requirements and test methods German version EN 15918 2011+A2 2017《自行车 自行车拖车 安全要求和试验方法 德文版本EN 15918-2011+A2-2017》.pdf

《DIN EN 15918-2017 Cycles - Cycle trailers - Safety requirements and test methods German version EN 15918 2011+A2 2017《自行车 自行车拖车 安全要求和试验方法 德文版本EN 15918-2011+A2-2017》.pdf》由会员分享，可在线阅读，更多相关《DIN EN 15918-2017 Cycles - Cycle trailers - Safety requirements and test methods German version EN 15918 2011+A2 2017《自行车 自行车拖车 安全要求和试验方法 德文版本EN 15918-2011+A2-2017》.pdf（36页珍藏版）》请在麦多课文档分享上搜索。

1、May 2017 English price group 16No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 43.150!%eB|“2663189www.din.deDIN EN

2、15918Cycles Cycle trailers Safety requirements and test methods;English version EN 15918:2011+A2:2017,English translation of DIN EN 15918:2017-05Fahrrder Fahrradanhnger Sicherheitstechnische Anforderungen und Prfverfahren;Englische Fassung EN 15918:2011+A2:2017,Englische bersetzung von DIN EN 15918:

3、2017-05Cycles Remorques pour cycles Exigences de scurit et mthodes dessai;Version anglaise EN 15918:2011+A2:2017,Traduction anglaise de DIN EN 15918:2017-05SupersedesDIN EN 15918:201304www.beuth.deDTranslation by DIN-Sprachendienst.In case of doubt, the German-language original shall be considered a

4、uthoritative.Document comprises 36 pages 05.17 2 A comma is used as the decimal marker. Start of application The start of application of this standard is 2017-05-01. National foreword This standard includes safety requirements within the meaning of the Produktsicherheitsgesetz (ProdSG) (German Produ

5、ct Safety Act). This document (EN 15918:2011+A2:2017) has been prepared by Technical Committee CEN/TC 333 “Bicycles”, Working Group WG 1 “Cycles for common use and bicycle trailers” (Secretariat: DIN, Germany). The responsible German body involved in its preparation was DIN-Normenausschuss Sport- un

6、d Freizeitgert (DIN Standards Committee Sports Equipment), Working Committee NA 112-06-02 AA “Bicycle accessories”. This standard includes Amendment A1 approved by CEN on 20 November 2012 and Amendment A2 approved by CEN on 06 February 2017. The start and finish of text introduced or altered by Amen

7、dment 1 and Amendment 2 is indicated in the text by tags !“ and #$. Where this standard has been identified by the Ausschuss fr Produktsicherheit (German Committee for Product Safety) and reference to it has been published in the Gemeinsames Ministerialblatt (German Joint Ministerial Gazette) by the

8、 Bundesanstalt fr Arbeitsschutz und Arbeitsmedizin (BAuA) (German Federal Institute for Occupational Safety and Health), it is to be presumed that cycle trailers which comply with this standard fulfil the relevant health and safety requirements. Amendments This standard differs from DIN EN 15918:201

9、3-04 as follows: a) in 4.4, in Table 2, in the first line “Temperatures”, the tolerance has been amended; b) in 6.3, Figure 2 has been replaced and the last paragraph has been adapted; c) in 6.11.2, the first paragraph has been amended and Figure 7 has been included; d) in 6.15.2.3, reference to the

10、 former Figure 7 has been replaced by a reference to Figure 8 and the former Figure 8 has been replaced by Figure 9 below the renumbered Figure 8; e) in 6.16.1, reference to the former Figure 9 has been replaced by a reference to Figure 10 and the former Figure 10 has been replaced by Figure 11; f)

11、6.16.2 has been completely updated; g) in 6.18.2, numbering of and reference to the former Figure 12 have been replaced by a reference to Figure 13 and the former Table 5 has been replaced by Table 4; DIN EN 15918:2017-05 3 h) in 6.19.2, the second paragraph has been revised, reference to the former

12、 Figure 13 has been replaced by a reference to Figure 14 and a fourth paragraph has been included before Figure 14; i) in Clause 8, an additional item r) containing information on EPAC has been included; j) in Annex A, Figure A.1 has been replaced and Table A.1 has been revised; k) the standard has

13、been editorially revised and brought in line with the current rules of presentation. Previous editions DIN EN 15918: 2011-12, 2013-04 DIN EN 15918:2017-05 4 This page is intentionally blank DIN EN 15918:2017-05 EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 15918:2011+A2 March 2017 ICS 43.150

14、Supersedes EN 15918:2011+A1:2013 English Version Cycles - Cycle trailers - Safety requirements and test methods Cycles - Remorques pour cycles - Exigences de scurit et mthodes dessai Fahrrder - Fahrradanhnger - Sicherheitstechnische Anforderungen und Prfverfahren This European Standard was approved

15、by CEN on 18 June 2011 and includes Amendment 1 approved by CEN on 20 November 2012 and Amendment 2 approved by CEN on 6 February 2017. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national

16、standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version

17、in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech

18、 Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United King

19、dom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 15918:2

20、011+A2:2017 E EN 15918:2011+A2:2017 (E) 2Contents Page European foreword . 4 Introduction 5 1 Scope 6 2 Normative references 6 3 Terms and definitions . 6 4 General test requirements . 7 4.1 Classification of cycle trailers . 7 4.2 Sampling . 8 4.3 Order of tests 8 4.4 Tolerances . 8 4.5 Test bodies

21、 . 9 4.6 Access zone for type C cycle trailers . 9 5 Materials . 9 5.1 Chemical properties for type C cycle trailers (Migration of certain elements) 9 5.2 Flammability for type C cycle trailers 9 6 Construction . 10 6.1 General . 10 6.2 Drawbar load and height . 10 6.3 Deflection device 10 6.4 Hazar

22、dous edges and protrusions . 11 6.4.1 Requirements 11 6.4.2 Test methods . 11 6.5 Shear and compression points for type C cycle trailers . 11 6.6 Indirect contact with the wheels for type C cycle trailers . 11 6.6.1 Requirements 11 6.6.2 Test methods . 11 6.7 Front protection for type C cycle traile

23、rs 12 6.7.1 Requirements 12 6.7.2 Test methods . 12 6.8 Entrapment for type C cycle trailers . 12 6.8.1 Requirements 12 6.8.2 Test methods . 12 6.9 Small parts for type C cycle trailers . 13 6.10 Folding mechanism . 14 6.10.1 Requirements 14 6.10.2 Test method . 14 6.11 Dimensions of the headroom fo

24、r type C cycle trailers 14 6.11.1 Requirements 14 6.11.2 Test method . 14 6.12 Parking brake 15 6.12.1 Requirements 15 6.12.2 Test method . 16 6.13 Stability 16 6.13.1 Requirements 16 DIN EN 15918:2017-05 EN 15918:2011+A2:2017 (E) 3 6.13.2 Stability test for type C2 cycle trailers 16 6.14 Lighting s

25、ystems, reflectors and other conspicuity aids 16 6.15 Frame and chassis 17 6.15.1 Requirements . 17 6.15.2 Test method 17 6.16 Drawbar and connecting device 19 6.16.1 Requirements . 19 6.16.2 Test method 20 6.17 Secondary safety device . 20 6.17.1 Requirements . 21 6.17.2 Test method 21 6.18 Strengt

26、h of the restraint system 21 6.18.1 Requirements . 21 6.18.2 Test method 21 6.19 Rigidity of the passenger cab for type C cycle trailers only . 22 6.19.1 Requirements . 22 6.19.2 Test method 22 7 Test report 23 8 Manufacturers instructions . 23 9 Marking 24 9.1 Marking requirement 24 9.2 Durability.

27、 24 Annex A (normative) Test bodies 25 Annex B (normative) Calculation of maximum possible deceleration . 28 Annex C (normative) Test order . 31 C.1 General . 31 C.2 Dynamic tests . 31 C.3 Static tests . 31 Bibliography . 32 DIN EN 15918:2017-05 EN 15918:2011+A2:2017 (E) 4 European foreword This doc

28、ument (EN 15918:2011+A2:2017) has been prepared by Technical Committee CEN/TC 333 “Cycles”, the secretariat of which is held by UNI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by September 2017,

29、 and conflicting national standards shall be withdrawn at the latest by September 2017. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights

30、. This document includes Amendment 1 approved by CEN on 20 November 2012 and Amendment 2, approved by CEN on 6 February 2017. This document supersedes #EN 15918:2011+A1:2013$. The start and finish of text introduced or altered by amendment is indicated in the text by tags !“ and #$. According to the

31、 CEN/CENELEC Internal Regulations, the national standards organisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hu

32、ngary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. DIN EN 15918:2017-05 EN 15918:2011+A2:2017 (E) 5 Introduction This European Standard does not c

33、over single wheel trailers due to the time necessary for test method validation, even though this type is a significant share of the market. DIN EN 15918:2017-05 EN 15918:2011+A2:2017 (E) 6 1 Scope This European standard specifies safety requirements and test methods for two track cycle trailers (i.

34、e. with one or two wheels) and their connecting devices. These cycle trailers are intended for the conveyance of cargo loads or up to two passive child passengers (i.e. not pedalling), both of whom are capable of sitting unaided and neither of whom weighs more than 22 kg. The maximum permitted weigh

35、t of such a cycle trailer, including cargo and/or passenger(s), does not exceed 60 kg. This standard is not applicable to trailer cycles (one or two-track trailer for the transportation of one or two pedalling passengers, usually children, with device for connection behind cycle) and for type L trai

36、lers for professional use or with a single wheel (single track trailer) according to Table 1. 2 Normative references !The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited appl

37、ies. For undated references, the latest edition of the referenced document (including any amendments) applies.“ EN 71-1:2005+A9:2009, Safety of toys Part 1: Mechanical and physical properties EN 71-3, Safety of toys Part 3: Migration of certain elements EN 1888, Child care articles - Wheeled child c

38、onveyances - Safety requirements and test methods !EN ISO/IEC 17025, General requirements for the competence of testing and calibration laboratories (ISO/IEC 17025)“ 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 cycle vehicle that has at le

39、ast two wheels and is propelled solely or mainly by the muscular energy of the person on that vehicle, in particular by means of pedals 3.2 cycle trailer one or two track trailer for the conveyance of loads and/or passive passengers, who do not contribute towards propulsion of the vehicle, with devi

40、ce for connection behind a cycle Note 1 to entry: Classification, see 4.1. 3.3 parking brake device to maintain the vehicle in a stationary position 3.4 access zone part of a type C cycle trailer that can be touched by an occupant DIN EN 15918:2017-05 EN 15918:2011+A2:2017 (E) 73.5 connecting device

41、 part of the cycle trailer that is fixed to the towing bicycle !3.6 pitch pivot transverse horizontal axis of rotation between connecting device and trailer, which allows the vertical displacements of the trailer relative to the cycle that occur at changes in gradient of the road surface“ !3.7“ tota

42、l weight weight of the cycle trailer plus load and/or children !3.8“ nominal load either the maximum weight of children and/or cargo specified by the manufacturer or the difference between the total weight indicated by the manufacturer and the empty weight of the cycle trailer whichever is the great

43、er !3.9“ standard drawbar load vertical load measured at the pitch pivot of the connection to the bicycle, which results when the cycle trailer has been loaded up as intended with the nominal load !3.10“ largest applicable test body largest of the three available standard sizes of test body (D9, D18

44、 or D22) that is equal to or greater than the passenger height or weight limit specified by the manufacturer !3.11“ visible crack crack which results from a test where that crack is visible to the naked eye !3.12“ fracture unintentional separation into two or more parts !3.13“ surface flash rapid sp

45、read of flame over the surface of a material without ignition of its base structure, reaching the first marker thread, which may or may not be severed, or either vertical edge of the test specimen EN 1103:2005 4 General test requirements 4.1 Classification of cycle trailers The classification of cyc

46、le trailers is given in Table 1. DIN EN 15918:2017-05 EN 15918:2011+A2:2017 (E) 8 Table 1 Types of cycle trailers Number of tracks For the transportation of: Childrena(C) Other loads (L) 1 (single track) 2 (two tracks) C2bL2 aIn case the cycle trailer is convertible into e.g. a stroller, see EN 1888

47、. bEXAMPLE Type C2 is a two track cycle trailer for the transportation of children and luggage. 4.2 Sampling A single trailer shall be subjected to all of the following tests. For all cycle trailers, where the superstructures have a variable design, all combinations of equipment shall meet all relev

48、ant requirements. Accessories shall, if included by the manufacturer, be included in the tests. In cases where the test method allows an element of discretion on the part of the tester, the tester shall use his discretion to produce a situation which he considers most likely to result in a failure.

49、4.3 Order of tests The tests shall be performed in the following order: a) inspection test; b) dynamic test; c) static test. For the order of tests, see Annex C. 4.4 Tolerances Unless stated otherwise, the tolerances given in Table 2 shall apply to nominal values. Table 2 Tolerances Tolerances Forces and torques 0 / + 5 % Masses and weights 1 % Dimensions 1 mm Angles 1 Time duration 5 s Temperatures # 5 C$ Pressures 5 % Speeds 5 % Acceleratio