DIN EN 54-22-2015 Fire detection and fire alarm systems - Part 22 Resettable line-type heat detectors German version EN 54-22 2015《火灾探测和火灾警报系统 第22部分 可复位线型热探测器 德文版本EN 54-22-2015》.pdf

《DIN EN 54-22-2015 Fire detection and fire alarm systems - Part 22 Resettable line-type heat detectors German version EN 54-22 2015《火灾探测和火灾警报系统 第22部分 可复位线型热探测器 德文版本EN 54-22-2015》.pdf》由会员分享，可在线阅读，更多相关《DIN EN 54-22-2015 Fire detection and fire alarm systems - Part 22 Resettable line-type heat detectors German version EN 54-22 2015《火灾探测和火灾警报系统 第22部分 可复位线型热探测器 德文版本EN 54-22-2015》.pdf（85页珍藏版）》请在麦多课文档分享上搜索。

1、July 2015 Translation by DIN-Sprachendienst.English price group 30No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 1

2、3.220.10!%D9)“2332206www.din.deDDIN EN 54-22Fire detection and fire alarm systems Part 22: Resettable line-type heat detectors;English version EN 54-22:2015,English translation of DIN EN 54-22:2015-07Brandmeldeanlagen Teil 22: Rcksetzbare linienfrmige Wrmemelder;Englische Fassung EN 54-22:2015,Engli

3、sche bersetzung von DIN EN 54-22:2015-07Systmes de dtection et dalarme incendie Partie 22: Dtecteurs de chaleur de type linaire renclenchables;Version anglaise EN 54-22:2015,Traduction anglaise de DIN EN 54-22:2015-07www.beuth.deIn case of doubt, the German-language original shall be considered auth

4、oritative.Document comprises 85 pages 06.15 DIN EN 54-22:2015-07 2 A comma is used as the decimal marker. Start of application The start of application of this standard is 2015-07-01. It should be noted that, in Germany, CE conformity marking of construction products will be permitted once this stan

5、dard has been listed in the Official Journal of the European Union and/or the Bundesanzeiger (German Federal Gazette) and from the date given therein. For further information, users of this standard should refer to the websites of the European Commission or of the relevant building authority. Nation

6、al foreword This document (EN 54-22:2015) has been prepared by Technical Committee CEN/TC 72 “Fire detection and fire alarm systems” (Secretariat: BSI, United Kingdom). The responsible German body involved in its preparation was the DIN-Normenausschuss Feuerwehrwesen (DIN Standards Committee Firefig

7、hting and Fire Protection), Working Group NA 031-02-01-13 AK Brand-melder Gruppe B of Working Committee NA 031-02-01 AA Brandmelde- und Feueralarmanlagen. This European product standard specifies requirements for resettable line-type heat detectors for use in fire detection and alarm systems permane

8、ntly installed in buildings (referred to in German as “BMS” and “BMA” equipment). The system requirements and technical application rules for fire detection and fire alarm systems complying with this standard are specified in DIN 14675 and DIN VDE 0833-2 (VDE 0833-2). Certification of conformity of

9、these products with the requirements specified in this European Standard is based on conformity evaluation of the products carried out by “Notified Bodies” in accordance with the EU Directive No. 305/2011 (see Annex ZA). National Annex NA (informative) Bibliography DIN 14675, Fire detection and fire

10、 alarm systems Design and operation DIN VDE 0833-2 (VDE 0833-2), Alarm systems for fire, intrusion and hold up Part 2: Requirements for fire alarm systems EUV 305/2011, Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011 laying down harmonised conditions for the

11、 marketing of construction products and repealing Council Directive 89/106/EEC EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 54-22 May 2015 ICS 13.220.20; 13.220.10 English Version Fire detection and fire alarm systems - Part 22: Resettable line-type heat detectors Systmes de dtection et dala

12、rme incendie - Partie 22: Dtecteurs de chaleur de type linaire renclenchables Brandmeldeanlagen - Teil 22: Rcksetzbare linienfrmige Wrmemelder This European Standard was approved by CEN on 19 March 2015. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the co

13、nditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exi

14、sts in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national st

15、andards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia,

16、Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2015 CEN All rights of exploitation in any form and by any means rese

17、rved worldwide for CEN national Members. Ref. No. EN 54-22:2015 EEN 54-22:2015 (E) 2 Contents Page Foreword 4 Introduction .6 1 Scope 7 2 Normative references 7 3 Terms, definitions and abbreviations 8 3.1 Terms and definitions .8 3.2 Abbreviations .9 4 Product characteristics .9 4.1 General 9 4.2 N

18、ominal activation conditions/sensitivity 10 4.3 Operational reliability . 11 4.4 Tolerance to supply voltage 13 4.5 Performance parameters under fire conditions 13 4.6 Durability of nominal activation conditions/sensitivity 14 5 Testing, assessments and sampling methods 15 5.1 General . 15 5.2 Test

19、procedures nominal activation conditions/sensitivity . 19 5.3 Test procedures operational reliability. 20 5.4 Tolerance to supply voltage 22 5.5 Performance parameters under fire conditions 23 5.6 Durability of nominal activation conditions/sensitivity 27 6 Assessment and verification of constancy o

20、f performance (AVCP) . 47 6.1 General . 47 6.2 Type testing . 48 6.3 Factory production control (FPC) . 49 7 Classification . 54 8 Marking, labelling and packaging . 54 8.1 General . 54 8.2 Marking of sensor control unit 55 8.3 Marking of sensing element 55 8.4 Marking of functional units 55 Annex A

21、 (normative) Arrangement of the sensing element in the fire test room 56 A.1 General . 56 A.2 Fire test room arrangement . 56 A.3 Sensing element outside the fire test room . 56 Annex B (normative) Flaming liquid test fires (TF6F, TF6 and TF6S) . 58 B.1 General . 58 B.2 Arrangement 58 B.3 Ignition .

22、 58 B.4 End of test condition 58 B.5 Test validity criteria 59 DIN EN 54-22:2015-07 EN 54-22:2015 (E)3 Annex C (normative) Test arrangement for the sensing element of linear heat detector in the heat tunnel 60 C.1 General . 60 C.2 Test arrangement for the sensing element . 60 Annex D (informative) A

23、pparatus for mounting of the sensing element of linear heat detector in the heat tunnel . 61 D.1 General . 61 D.2 Test apparatus . 61 Annex E (normative) Mounting of the sensing element of multipoint RLTHD in the heat tunnel . 62 E.1 General . 62 E.2 Mounting arrangement of multipoint sensing elemen

24、t . 62 Annex F (normative) Heat tunnel for response time and response temperature measurements . 64 F.1 General . 64 F.2 Description of the heat tunnel 64 Annex G (informative) Construction of the heat tunnel 65 G.1 General . 65 G.2 Heat tunnel construction 65 Annex H (normative) Test arrangement fo

25、r vibration tests for sensing element . 67 H.1 General . 67 H.2 Test setup . 67 Annex I (normative) Test apparatus for impact test on the sensing element . 68 I.1 General . 68 I.2 Test apparatus . 68 I.3 Test setup . 68 Annex J (informative) Data supplied with resettable line-type heat detectors . 7

26、1 Annex ZA (informative) Clauses of this European Standard addressing the provisions of the EU Construction Products Regulation 72 ZA.1 Scope and relevant characteristics . 72 ZA.2 Procedure for assessment and verification of constancy of performance (AVCP) of resettable line-type heat detectors 74

27、ZA.2.1 System of AVCP 74 ZA.2.2 Declaration of performance (DoP) . 75 ZA.2.2.1 General 75 ZA.2.2.2 Content 75 ZA.2.2.3 Example of DoP 76 ZA.3 CE marking and labelling 79 Bibliography 83 DIN EN 54-22:2015-07 EN 54-22:2015 (E)4 Foreword This document (EN 54-22:2015) has been prepared by Technical Comm

28、ittee CEN/TC 72 “Fire detection and fire alarm systems”, the secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by November 2015, and conflicting national standards

29、shall be withdrawn at the latest by May 2019. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a

30、mandate given to CEN by the European Commission and the European Free Trade Association, and supports the basic requirements of Regulation (EU) 305/2011. For relationship with EU Directive(s), see informative Annex ZA which is an integral part of this document. EN 54 “Fire detection and fire alarm s

31、ystems“ consists of the following parts: Part 1: Introduction Part 2: Control and indicating equipment Part 3: Fire alarm devices Sounders Part 4: Power supply equipment Part 5: Heat detectors Point detectors Part 7: Smoke detectors Point detectors using scattered light, transmitted light or ionizat

32、ion Part 10: Flame detectors Point detectors Part 11: Manual call points Part 12: Smoke detectors Line detector using an optical light beam Part 13: Compatibility assessment of system components Part 14: Guidelines for planning, design, installation, commissioning, use and maintenance Part 15: Point

33、 detectors using a combination of detected phenomena Part 16: Voice alarm control and indicating equipment Part 17: Short circuit isolators Part 18: Input/output devices Part 20: Aspirating smoke detectors Part 21: Alarm transmission and fault warning routine equipment Part 22: Resettable line-type

34、heat detectors DIN EN 54-22:2015-07 EN 54-22:2015 (E)5 Part 23: Fire alarm devices Visual alarms Part 24: Components of voice alarm systems Loudspeakers Part 25: Components using radio links and system requirements Part 26: Carbon monoxide detectors Point detectors (in preparation) Part 27: Duct smo

35、ke detectors (in preparation) Part 28: Non-resettable line-type heat detectors (in preparation) Part 29: Multi-sensor fire detectors - Point detectors using a combination of smoke and heat sensors Part 30: Multi-sensor fire detectors - Point detectors using a combination of carbon monoxide and heat

36、sensors Part 31: Multi-sensor detector Point detectors using a combination of smoke, carbon monoxide and optionally heat sensors Part 32: Guidelines for the planning, design, installation, commissioning, use and maintenance of voice alarm systems NOTE This list includes standards that are in prepara

37、tion and other standards may be added. For current status of published standards refer to www.cen.eu. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia,

38、 Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the U

39、nited Kingdom. DINEN 54-22:2015-07EN 54-22:2015 (E) 6 Introduction Resettable line-type heat detectors (RLTHD) have been incorporated into fire alarm systems for a considerable number of years. These detectors are typically used in areas where point type heat detectors are presented with challenging

40、 environmental characteristics and also where access to the detectors may significantly influence the fire alarm system design. This standard defines the minimum system functionality for RLTHD products. RLTHD are based upon many unique operating principles. It is the intention of this standard to de

41、fine common operating characteristics for each type of RLTHD in conjunction with existing EN 54 detector standards, so that resettable line-type heat detectors have a response behaviour comparable to that of point type heat detectors. Due to the various applications for RLTHD, it is necessary to dev

42、ise separate environmental classification tests for the sensing element and the sensor control units of these systems. It is not the purpose of this standard to define applications or how RLTHD should be used in applications. However, the standard indicates two general fields of application, room pr

43、otection and secondly local protection. The standard defines separate response test classifications for these two fields. Generally there are two functional principles employed by RLTHD: non-integrating and integrating systems. Therefore separated subclasses have been created for non integrating sys

44、tems and for integrating systems. DIN EN 54-22:2015-07 EN 54-22:2015 (E)7 1 Scope This European Standard applies to resettable line-type heat detectors consisting of a sensing element using an optical fibre, a pneumatic tube or an electrical sensor cable connected to a sensor control unit, either di

45、rectly or through an interface module, intended for use in fire detection and fire alarm systems installed in and around buildings and other civil engineering works (see EN 54-1:2011). This European Standard specifies the requirements and performance criteria, the corresponding test methods and prov

46、ides for the Assessment and Verification of Constancy of Performance (AVCP) of resettable line-type heat detectors to this EN. This European Standard also covers resettable line-type heat detectors intended for use in the local protection of plant and equipment. Resettable line-type heat detectors w

47、ith special characteristics and developed for specific risks are not covered by this EN. This European Standard does not cover line-type heat detectors that are based on non-resettable, fixed temperature electrical cables (so called “digital” systems). 2 Normative references The following documents,

48、 in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 54-1:2011, Fire detection and fire alarm systems Part 1: Introduction EN 54-7:2000, Fire detection and fire alarm systems Part 7: Smoke detectors Point detectors using scattered light, transmitted light or ionization EN 50130-4:2011, Alarm system