DIN EN 12043-2015 Food processing machinery - Intermediate provers - Safety and hygiene requirements German version EN 12043 2014《食品加工机械 中间校准仪 安全性和卫生要求 德文版本EN 12043-2014》.pdf

《DIN EN 12043-2015 Food processing machinery - Intermediate provers - Safety and hygiene requirements German version EN 12043 2014《食品加工机械 中间校准仪 安全性和卫生要求 德文版本EN 12043-2014》.pdf》由会员分享，可在线阅读，更多相关《DIN EN 12043-2015 Food processing machinery - Intermediate provers - Safety and hygiene requirements German version EN 12043 2014《食品加工机械 中间校准仪 安全性和卫生要求 德文版本EN 12043-2014》.pdf（45页珍藏版）》请在麦多课文档分享上搜索。

1、February 2015Translation by DIN-Sprachendienst.English price group 18No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).IC

2、S 67.260!%k“2297257www.din.deDDIN EN 12043Food processing machinery Intermediate provers Safety and hygiene requirements;English version EN 12043:2014,English translation of DIN EN 12043:2015-02Nahrungsmittelmaschinen Zwischengrschrank Sicherheits- und Hygieneanforderungen;Englische Fassung EN 12043

3、:2014,Englische bersetzung von DIN EN 12043:2015-02Machines pour les produits alimentaires Chambres de repos Prescriptions relatives la scurit et lhygine;Version anglaise EN 12043:2014,Traduction anglaise de DIN EN 12043:2015-02SupersedesDIN EN 12043:2011-06www.beuth.deIn case of doubt, the German-l

4、anguage original shall be considered authoritative.Document comprises 45 pages02.15 DIN EN 12043:2015-02 2 A comma is used as the decimal marker. National foreword This standard includes safety requirements. This document (EN 12043:2014) has been prepared by Technical Committee CEN/TC 153 “Machinery

5、 intended for use with foodstuffs and feed” (Secretariat: DIN, Germany). The responsible German body involved in its preparation was the DIN-Normenausschuss Maschinenbau (DIN Standards Committee Mechanical Engineering), Working Committee NA 060-18-01 AA Bckereimaschinen of Section Nahrungsmittel- un

6、d Verpackungsmaschinen. Representatives of manufacturers and users of bakery equipment, and of the employers liability insurance associations contributed to this standard. This standard contains specifications meeting the essential requirements set out in Annex I of the “Machinery Directive”, Direct

7、ive 2006/42/EC, and which apply to machines that are either first placed on the market or commissioned within the EEA. This standard serves to facilitate proof of compliance with the essential requirements of that directive. Once this standard is cited in the Official Journal of the European Union,

8、it is deemed a “harmonized” standard and thus, a manufacturer applying this standard may assume compliance with the requirements of the Machinery Directive (“presumption of conformity”). The European Standards referred to in Clause 2 and in the Bibliography of the EN have been published as the corre

9、sponding DIN EN or DIN EN ISO Standards with the same number. Where the International Standards referred to are not also DIN ISO Standards with the same number, there are no national standards available. Amendments This standard differs from DIN EN 12043:2011-06 as follows: a) protective measures fo

10、r the loading have been modified; b) requirements for emergency stop have been added; c) requirements for nip guards have been stated more precisely; d) thermal hazards, lamps, and hazards generated by UV radiation have been added; e) the table concerning the verification of safety and hygiene requi

11、rements has been completely revised. Previous editions DIN EN 12043: 2001-02, 2011-06 EN 12043 November 2014 ICS 67.260 Supersedes EN 12043:2000+A1:2010English Version Food processing machinery - Intermediate provers - Safety and hygiene requirements Machines pour les produits alimentaires - Chambre

12、s de repos - Prescriptions relatives la scurit et lhygine Nahrungsmittelmaschinen - Zwischengrschrank -Sicherheits- und Hygieneanforderungen This European Standard was approved by CEN on 6 September 2014. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the c

13、onditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard ex

14、ists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national s

15、tandards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia,

16、 Slovenia, Spain, Sweden, Switzerland, Turkey andUnited Kingdom. CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2014 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 12043:2014 EEUROPEAN COMMITTEE FOR STANDARDIZATI

17、ONCOMIT EUROPEN DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNGEUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN 12043:2014 (E) 2 Contents Page Foreword 4 Introduction .5 1 Scope 6 2 Normative references 6 3 Terms, definitions and description 7 3.1 Terms and definitions .7 3.2 Description .7 4 List o

18、f significant hazards 8 5 Safety and hygiene requirements and/or protective measures . 11 5.1 General . 11 5.2 Mechanical hazards 11 5.2.1 General . 11 5.2.2 Zone 1 and zone 6 Zone of loading and unloading of the dough portions 12 5.2.3 Zone 2 Drive mechanisms 13 5.2.4 Zone 3 Carrier transfer system

19、 . 15 5.2.5 Zone 4 Flour duster 15 5.2.6 Zone 5 Fan with or without heating device . 15 5.2.7 Loss of stability . 15 5.3 Electrical hazards . 15 5.3.1 General . 15 5.3.2 Safety requirements related to electromagnetic phenomena 16 5.3.3 Protection against electric shock . 16 5.3.4 Power circuits . 16

20、 5.3.5 Protection against earth faults in control circuits . 16 5.4 Emergency stop 16 5.5 Motor enclosures 16 5.6 Protection against flour dust emission 16 5.7 Thermal hazard . 17 5.7.1 General . 17 5.7.2 Hot surfaces 17 5.7.3 Fire hazard . 17 5.8 Lamps 17 5.9 Hygiene requirements 17 5.10 Hazards ge

21、nerated by neglecting ergonomic principles 19 5.11 Hazards generated by UV radiation 19 6 Verification of safety and hygiene requirements and/or protective measures 20 7 Information for use . 21 7.1 General . 21 7.2 Instruction handbook . 21 7.3 Marking 23 DIN EN 12043:2015-02EN 12043:2014 (E) 3 Bib

22、liography 43 Annex A (normative) Noise test code Grade 2 of accuracy . 24 Annex B (normative) Principles of design to ensure the cleanability of intermediate provers . 27 Annex ZA (informative) Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC . 42

23、 DIN EN 12043:2015-02EN 12043:2014 (E) 4 Foreword This document (EN 12043:2014) has been prepared by Technical Committee CEN/TC 153 “Machinery intended for use with foodstuffs and feed”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard,

24、 either by publication of an identical text or by endorsement, at the latest by May 2015 and conflicting national standards shall be withdrawn at the latest by May 2015. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or C

25、ENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 12043:2000+A1:2010. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of

26、EU Directive 2006/42/EC. For relationship with EU Directive 2006/42/EC, see informative Annex ZA, which is an integral part of this document. Significant changes: The significant changes with respect to the previous edition EN 12043:2000+A1:2010 are listed below: protective measures for the loading

27、were modified; requirements for emergency stop were added; requirements for nip guards were stated more precisely; thermal hazards, lamps, and hazards generated by UV radiation were added; the table of verification of safety and hygiene requirements was completely revised. According to the CEN-CENEL

28、EC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Ice

29、land, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. DIN EN 12043:2015-02EN 12043:2014 (E) 5 Introduction This European Standard is a type C standard as stated in EN

30、ISO 12100. The machinery concerned and the extent to which hazards, hazardous situations and events are covered are indicated in the scope of this European Standard. When provisions of this type C standard are different from those which are stated in type A or B standards, the provisions of this typ

31、e C standard take precedence over the provisions of the other standards, for machines that have been designed and built according to the provisions of this type C standard. DIN EN 12043:2015-02EN 12043:2014 (E) 6 1 Scope 1.1 This European Standard specifies safety and hygiene requirements for the de

32、sign and manufacture of intermediate provers with powered moving pocket carriers as described in Clause 3 and used in the food industry, pastry-making, bakeries, etc. for giving a resting time to dough between different phases of the process. This European Standard deals with all significant hazards

33、, hazardous situations and events relevant to the installation, adjustment, operation, cleaning, maintenance, dismantling, disabling and scrapping of intermediate provers with moving pocket carriers when they are used as intended and under conditions of misuse which are reasonably foreseeable by the

34、 manufacturer (see Clause 4). Noise is not considered to be a significant hazard by intermediate provers. This does not mean that the manufacturer of the machine is absolved from reducing noise and making a noise declaration. Therefore a noise test code is proposed in Annex A. 1.2 The following mach

35、ines are excluded: independent automatic loading system not integrated with the machine; experimental and testing machines under development by the manufacturer; retarder and final proofer. 1.3 This European Standard is not applicable to intermediate provers with moving pocket carriers which are man

36、ufactured before the date of its publication as EN. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edi

37、tion of the referenced document (including any amendments) applies. EN 614-1:2006+A1:2009, Safety of machinery Ergonomic design principles Part 1: Terminology and general principles EN 953, Safety of machinery Guards General requirements for the design and construction of fixed and movable guards EN

38、 1672-2:2005+A1:2009, Food processing machinery Basic concepts Part 2: Hygiene requirements EN 60204-1:2006, Safety of machinery Electrical equipment of machines Part 1: General requirements (IEC 60204-1:2005, modified) EN 60529, Degrees of protection provided by enclosures (IP Code) (IEC 60529) EN

39、61000-6-1, Electromagnetic compatibility (EMC) Part 6-1: Generic standards Immunity for residential, commercial and light-industrial environments (IEC 61000-6-1) EN ISO 3744:2010, Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering

40、methods for an essentially free field over a reflecting plane (ISO 3744:2010) DIN EN 12043:2015-02EN 12043:2014 (E) 7 EN ISO 4287, Geometrical product specifications (GPS) Surface texture: Profile method Terms, definitions and surface texture parameters (ISO 4287) EN ISO 4871, Acoustics Declaration

41、and verification of noise emission values of machinery and equipment (ISO 4871) EN ISO 11201, Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane wit

42、h negligible environmental corrections (ISO 11201) EN ISO 12001, Acoustics Noise emitted by machinery and equipment Rules for the drafting and presentation of a noise test code (ISO 12001) EN ISO 12100:2010, Safety of machinery General principles for design Risk assessment and risk reduction (ISO 12

43、100:2010) EN ISO 13732-1, Ergonomics of the thermal environment Methods for the assessment of human responses to contact with surfaces Part 1: Hot surfaces (ISO 13732-1) EN ISO 13849-1:2008, Safety of machinery Safety-related parts of control systems Part 1: General principles for design (ISO 13849-

44、1:2006) EN ISO 13850, Safety of machinery Emergency stop Principles for design (ISO 13850) EN ISO 13857:2008, Safety of machinery Safety distances to prevent hazard zones being reached by upper and lower limbs (ISO 13857:2008) EN ISO 14119, Safety of machinery Interlocking devices associated with gu

45、ards Principles for design and selection (ISO 14119) 3 Terms, definitions and description 3.1 Terms and definitions For the purposes of this document, the terms and definitions given in EN ISO 12100:2010 and the following applies. 3.1.1 pocket tilting/guided plate or tilting/guided basket or tilting

46、/guided cup, inside the prover, on which the piece of dough is placed during the resting time 3.2 Description As shown in Figure 1, an intermediate prover consists of: a variable number of pockets supported in a carrier into which dough pieces are placed. One pocket may hold more than one dough piec

47、e; a mechanical transfer system moving the pocket carrier along a defined path inside the machine; a housing supporting or containing the transmission machinery. The following features may also be included: DIN EN 12043:2015-02EN 12043:2014 (E) 8 an automatic device to control the temperature and/or

48、 humidity inside the machine; a flour dusting device; other accessories, e.g. germicidal lamp (device to prevent the formation of mould generally an ultraviolet lamp), pocket drier (device to dry the pockets generally an infrared lamp or a ventilation system with or without heating); integrated syst

49、em(s) to load/unload the pockets. The resting time is the period of time from loading until unloading of a single pocket. This time can be fixed or variable. There are openings in the frame where dough portions are introduced into the machine and where they are taken out. The position of loading and unloading depends on the frame shape and the path of movement of the poc