CGSB 4 2 NO 12 3-05-CAN CGSB-2005 Methodes pour epreuves textiles Textiles - Proprietes de dechirement des etoffes - Partie 1 Determination de la force de dechirure a I aide de la .pdf

《CGSB 4 2 NO 12 3-05-CAN CGSB-2005 Methodes pour epreuves textiles Textiles - Proprietes de dechirement des etoffes - Partie 1 Determination de la force de dechirure a I aide de la .pdf》由会员分享，可在线阅读，更多相关《CGSB 4 2 NO 12 3-05-CAN CGSB-2005 Methodes pour epreuves textiles Textiles - Proprietes de dechirement des etoffes - Partie 1 Determination de la force de dechirure a I aide de la .pdf（18页珍藏版）》请在麦多课文档分享上搜索。

1、Governmentof CanadaCanadian GeneralStandards BoardExperience and excellenceExprience et excellenceGouvernementdu CanadaOffice des normesgnrales du Canada CAN/CGSB-4.2No. 12.3-2005/ISO 13937-1:2000Supersedes CAN/CGSB-4.2No. 12.3-94Textile Test MethodsTextiles Tear Properties of Fabrics Part 1: Determ

2、ination of Tear Force Using Ballistic PendulumMethod (Elmendorf) (ISO 13937-1:2000, IDT)ICS 59.080.30International Organization for StandardizationNational Standard of CanadaCopyright Canadian General Standards Board Provided by IHS under license with CGSBNot for ResaleNo reproduction or networking

3、permitted without license from IHS-,-,-The CANADIAN GENERAL STANDARDS BOARD (CGSB), The STANDARDS COUNCIL OF CANADA is the co-ordinatingunder whose auspices this National Standard of Canada has been body of the National Standards System, a federation ofdeveloped is a government agency within Public

4、Works and independent, autonomous organizations working towards theGovernment Services Canada. CGSB is engaged in the production further development and improvement of voluntaryof voluntary standards in a wide range of subject areas through the standardization in the national interest.media of stand

5、ards committees and the consensus process. TheThe principal objectives of the Council are to foster and promotestandards committees are composed of representatives of relevantvoluntary standardization as a means of advancing the nationalinterests including producers, consumers and other users, retai

6、lers,economy, benefiting the health, safety and welfare of the public,governments, educational institutions, technical, professional andassisting and protecting the consumer, facilitating domestic andtrade societies, and research and testing organizations. Any giveninternational trade, and furtherin

7、g international co-operation in thestandard is developed on the consensus of views expressed byfield of standards.such representatives.A National Standard of Canada is a standard which has beenCGSB has been accredited by the Standards Council of Canada asapproved by the Standards Council of Canada a

8、nd one whicha national standards-development organization. The standards thatreflects a reasonable agreement among the views of a number ofit develops and offers as National Standards of Canada conform tocapable individuals whose collective interests provide, to thethe criteria and procedures establ

9、ished for this purpose by thegreatest practicable extent, a balance of representation ofStandards Council of Canada. In addition to standards it publishesproducers, users, consumers and others with relevant interests, asas national standards, CGSB produces standards to meet particularmay be appropri

10、ate to the subject in hand. It normally is aneeds, in response to requests from a variety of sources in both thestandard that is capable of making a significant and timelypublic and private sectors. Both CGSB standards and CGSBcontribution to the national interest.national standards are developed in

11、 conformance with the policiesApproval of a standard as a National Standard of Canada indicatesdescribed in the CGSB Policy Manual for the Development andthat a standard conforms to the criteria and procedures establishedReview of Standards.by the Standards Council of Canada. Approval does not refer

12、 toCGSB standards are subject to review and revision to ensure thatthe technical content of the standard; this remains the continuingthey keep abreast of technological progress. Suggestions for theirresponsibility of the accredited standards-developmentimprovement, which are always welcome, should b

13、e brought toorganization.the notice of the standards committees concerned. Changes toThose who have a need to apply standards are encouraged to usestandards are issued either as separate amendment sheets or inNational Standards of Canada whenever practicable. Thesenew editions of standards.standards

14、 are subject to periodic review; therefore, users areAn up-to-date listing of CGSB standards, including detailscautioned to obtain the latest edition from the organizationon latest issues and amendments, and ordering instructions,preparing the standard.is found in the CGSB Catalogue, which is publis

15、hed annuallyThe responsibility for approving National Standards of Canadaand is available without charge upon request. An electronicrests with the:version, ECAT, is also available. More information is availableabout CGSB products and services at our Web site Standards Council of Canadawww.ongc-cgsb.

16、gc.ca.270 Albert StreetSuite 200Although the intended primary application of this standard isOttawa, Ontariostated in its Scope, it is important to note that it remains theK1P 6N7responsibility of the users of the standard to judge its suitabilityfor their particular purpose.The testing and evaluati

17、on of a product against this standard mayrequire the use of materials and/or equipment that could behazardous. This document does not purport to address all thesafety aspects associated with its use. Anyone using this standardhas the responsibility to consult the appropriate authorities and toHow to

18、 order Publications:establish appropriate health and safety practices in conjunctionwith any applicable regulatory requirements prior to its use.CGSB neither assumes nor accepts any responsibility for any by telephone (819) 956-0425 orinjury or damage that may occur during or as the result of tests,

19、 1-800-665-2472wherever performed.by fax (819) 956-5644Attention is drawn to the possibility that some of the elements ofthis Canadian standard may be the subject of patent rights. CGSBby mail CGSB Sales Centreshall not be held responsible for identifying any or all such patentGatineau, Canadarights

20、. Users of this standard are expressly advised thatK1A 1G6determination of the validity of any such patent rights are entirelytheir own responsibility. in person Place du PortagePhase III, 6B1Further information on CGSB and its services and standards may11 Laurier Streetbe obtained from:Gatineau, Qu

21、ebecThe ManagerStrategic Standardization Divisionby email ncr.cgsb-ongcpwgsc.gc.caCanadian General Standards BoardGatineau, Canada on the Web www.ongc-cgsb.gc.caK1A 1G6Copyright Canadian General Standards Board Provided by IHS under license with CGSBNot for ResaleNo reproduction or networking permit

22、ted without license from IHS-,-,-NATIONAL STANDARD OF CANADA CAN/CGSB-4.2No. 12.3-2005/ISO 13937-1:2000Supersedes CAN/CGSB-4.2No. 12.3-94TEXTILE TEST METHODSTEXTILES TEAR PROPERTIES OF FABRICS PART 1: DETERMINATION OF TEAR FORCE USING BALLISTICPENDULUM METHOD (ELMENDORF) (ISO 13937-1:2000, IDT)Prepa

23、red by theInternational Organization for StandardizationReviewed by the Approved by theCanadian General Standards Board Standards Council of CanadaPublished April 2005 by theCanadian General Standards BoardGatineau, Canada K1A 1G6 HER MAJESTY THE QUEEN IN RIGHT OF CANADA,as represented by the Minist

24、er of Public Works and Government Services,the Minister responsible for the Canadian General Standards Board, (2005).No part of this publication may be reproduced in any form without the prior permission of the publisher.Copyright Canadian General Standards Board Provided by IHS under license with C

25、GSBNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-CANADIAN GENERAL STANDARDS BOARDCOMMITTEE ON TEXTILE TEST METHODS AND TERMINOLOGY(Membership at date of approval)Marsh, P. Chairperson PML ConsultingAllen, L. Canada Revenue AgencyBauerle, J. Bodycote ORTECHBourget

26、, S. National DefenceCarrick, D. National DefenceCarriere, S. Logistik Unicorp Inc.Cochran, B. Lincoln Fabrics Ltd.Gaetz, C. Industry CanadaHong, T. Sears Canada Inc.Izquierdo, V. Textile Technology CentreKo, D. The Incredible Clothing Co.LaMarsh, D. Difco Performance Fabrics Inc.Leonard, D.L. DuPon

27、t Canada Inc.Manness, J. University of ManitobaPatel, A.B. ConsultantPerkins, H. University of AlbertaRonsyn, C. Public Works and Government Services CanadaRoutier, D. Consoltex Inc.Sheuneman, P.A. Secretary Canadian General Standards BoardNo. 12.3-2005/CAN/CGSB-4.2 ISO 13937-1:2000Copyright Canadia

28、n General Standards Board Provided by IHS under license with CGSBNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-National Standard of CanadaTEXTILE TEST METHODS CAN/CGSB-4.2GatineauCanadaK1A 1G6Preface to the National Standard of CanadaNo. 12.3-2005/ISO 13937-1:200

29、0Supersedes CAN/CGSB-4.2No. 12.3-94This National Standard of Canada has been prepared by the CGSB Committee on Textile Test Methods and Terminology. Itis identical in content and in layout with International Standard ISO 13937-1, Textiles Tear properties of fabrics Part 1:Determination of tear force

30、 using ballistic pendulum method, published 2000-04-01 by the International Organization forStandardization (ISO). The International Standard was reviewed by the CGSB committee to determine its suitability forCanadian use. It was agreed to use it in total, without editorial changes.Throughout this s

31、tandard, the words “National Standard of Canada” are to be understood as replacing the words“International Standard” wherever they appear.Some terminology and conventions are not identical to those used in other test methods within CAN/CGSB-4.2 TextileTest Methods. For example, the comma is used thr

32、oughout this standard as a decimal marker rather than the point.The following National Standard of Canada corresponds to the referenced ISO standard:CANADA ISOCAN/CGSB-4.2 No. 2 ISO 139The testing and evaluation of a product against this method may require the use of materials and/or equipment that

33、could behazardous. This document does not purport to address all the safety aspects associated with its use. Anyone using this methodhas the responsibility to consult the appropriate authorities and to establish appropriate health and safety practices inconjunction with any applicable regulatory req

34、uirements prior to its use.The CGSB National Standards of Canada may be obtained from the Canadian General Standards Board, Sales Centre,Gatineau, Canada K1A 1G6. Telephone (819) 956-0425 or 1-800-665-2472. Fax (819) 956-5644.The International Standards may be obtained from IHS Canada, 1 Antares Dri

35、ve, Suite 200, Ottawa, Ontario K2E 8C4.Telephone (613) 237-4250 or 1-800-267-8220. Fax (613) 237-4251.iCopyright Canadian General Standards Board Provided by IHS under license with CGSBNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-ii No. 12.3-2005Copyright Canadi

36、an General Standards Board Provided by IHS under license with CGSBNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-No. 12.3-2005 iiiCopyright Canadian General Standards Board Provided by IHS under license with CGSBNot for ResaleNo reproduction or networking permitte

37、d without license from IHS-,-,-iv No. 12.3-2005Copyright Canadian General Standards Board Provided by IHS under license with CGSBNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-No. 12.3-2005 1Copyright Canadian General Standards Board Provided by IHS under license

38、with CGSBNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-2 No. 12.3-2005Copyright Canadian General Standards Board Provided by IHS under license with CGSBNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-No. 12.3-2005 3Copyright Can

39、adian General Standards Board Provided by IHS under license with CGSBNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-4 No. 12.3-2005Copyright Canadian General Standards Board Provided by IHS under license with CGSBNot for ResaleNo reproduction or networking permitt

40、ed without license from IHS-,-,-No. 12.3-2005 5Copyright Canadian General Standards Board Provided by IHS under license with CGSBNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-6 No. 12.3-2005Copyright Canadian General Standards Board Provided by IHS under license

41、with CGSBNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-No. 12.3-2005 7Copyright Canadian General Standards Board Provided by IHS under license with CGSBNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-8 No. 12.3-2005Copyright Can

42、adian General Standards Board Provided by IHS under license with CGSBNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-No. 12.3-2005 9Copyright Canadian General Standards Board Provided by IHS under license with CGSBNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-10 No. 12.3-2005Copyright Canadian General Standards Board Provided by IHS under license with CGSBNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-