CAN CSA-C61400-12-1-2007 Wind turbines – Part 12-1 Power performance measurements of electricity producing wind turbines (First Edition).pdf

《CAN CSA-C61400-12-1-2007 Wind turbines – Part 12-1 Power performance measurements of electricity producing wind turbines (First Edition).pdf》由会员分享，可在线阅读，更多相关《CAN CSA-C61400-12-1-2007 Wind turbines – Part 12-1 Power performance measurements of electricity producing wind turbines (First Edition).pdf（104页珍藏版）》请在麦多课文档分享上搜索。

1、 INTERNATIONAL STANDARD IEC61400-12-1First edition2005-12Wind turbines Part 12-1: Power performance measurements of electricity producing wind turbines Reference number IEC 61400-12-1:2005(E) National Standard of CanadaCAN/CSA-C61400-12-1:07(IEC 61400-12-1:2005)International Standard IEC 61400-12-1:

2、2007 (first edition, 2005-12) has been adopted withoutmodification (IDT) as CSA Standard CAN/CSA-C61400-12-1:07, which has been approved as a NationalStandard of Canada by the Standards Council of Canada.ISBN 978-1-55436-662-0 October 20075Publication numbering As from 1 January 1997 all IEC publica

3、tions are issued with a designation in the 60000 series. For example, IEC 34-1 is now referred to as IEC 60034-1. Consolidated editions The IEC is now publishing consolidated versions of its publications. For example, edition numbers 1.0, 1.1 and 1.2 refer, respectively, to the base publication, the

4、 base publication incorporating amendment 1 and the base publication incorporating amendments 1 and 2. Further information on IEC publications The technical content of IEC publications is kept under constant review by the IEC, thus ensuring that the content reflects current technology. Information r

5、elating to this publication, including its validity, is available in the IEC Catalogue of publications (see below) in addition to new editions, amendments and corrigenda. Information on the subjects under consideration and work in progress undertaken by the technical committee which has prepared thi

6、s publication, as well as the list of publications issued, is also available from the following: IEC Web Site (www.iec.ch) Catalogue of IEC publications The on-line catalogue on the IEC web site (www.iec.ch/searchpub) enables you to search by a variety of criteria including text searches, technical

7、committees and date of publication. On-line information is also available on recently issued publications, withdrawn and replaced publications, as well as corrigenda. IEC Just Published This summary of recently issued publications (www.iec.ch/online_news/ justpub) is also available by email. Please

8、contact the Customer Service Centre (see below) for further information. Customer Service Centre If you have any questions regarding this publication or need further assistance, please contact the Customer Service Centre: Email: custserviec.ch Tel: +41 22 919 02 11 Fax: +41 22 919 03 00 National Sta

9、ndard of CanadaCAN/CSA-C61400-12-1:07Wind turbines Part 12-1: Power performance measurements of electricity producing wind turbinesPrepared byInternational Electrotechnical CommissionRegistered trade-mark of Canadian Standards AssociationReviewed byApproved byStandards Council of CanadaPublished in

10、October 2007 by Canadian Standards AssociationA not-for-profit private sector organization5060 Spectrum Way, Suite 100, Mississauga, Ontario, Canada L4W 5N61-800-463-6727 416-747-4044Visit our Online Store at www.ShopCSA.caLegal Notice for StandardsCanadian Standards Association (CSA) standards are

11、developed through a consensus standards development process approved by the Standards Council of Canada. This process brings together volunteers representing varied viewpoints and interests to achieve consensus and develop a standard. Although CSA administers the process and establishes rules to pro

12、mote fairness in achieving consensus, it does not independently test, evaluate, or verify the content of standards.Disclaimer and exclusion of liabilityThis document is provided without any representations, warranties, or conditions of any kind, express or implied, including, without limitation, imp

13、lied warranties or conditions concerning this documents fitness for a particular purpose or use, its merchantability, or its non-infringement of any third partys intellectual property rights. CSA does not warrant the accuracy, completeness, or currency of any of the information published in this doc

14、ument. CSA makes no representations or warranties regarding this documents compliance with any applicable statute, rule, or regulation. IN NO EVENT SHALL CSA, ITS VOLUNTEERS, MEMBERS, SUBSIDIARIES, OR AFFILIATED COMPANIES, OR THEIR EMPLOYEES, DIRECTORS, OR OFFICERS, BE LIABLE FOR ANY DIRECT, INDIREC

15、T, OR INCIDENTAL DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES, HOWSOEVER CAUSED, INCLUDING BUT NOT LIMITED TO SPECIAL OR CONSEQUENTIAL DAMAGES, LOST REVENUE, BUSINESS INTERRUPTION, LOST OR DAMAGED DATA, OR ANY OTHER COMMERCIAL OR ECONOMIC LOSS, WHETHER BASED IN CONTRACT, TORT (INCLUDING NEGLIGENCE), OR

16、 ANY OTHER THEORY OF LIABILITY, ARISING OUT OF OR RESULTING FROM ACCESS TO OR POSSESSION OR USE OF THIS DOCUMENT, EVEN IF CSA HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES.In publishing and making this document available, CSA is not undertaking to render profe

17、ssional or other services for or on behalf of any person or entity or to perform any duty owed by any person or entity to another person or entity. The information in this document is directed to those who have the appropriate degree of experience to use and apply its contents, and CSA accepts no re

18、sponsibility whatsoever arising in any way from any and all use of or reliance on the information contained in this document. CSA is a private not-for-profit company that publishes voluntary standards and related documents. CSA has no power, nor does it undertake, to enforce compliance with the cont

19、ents of the standards or other documents it publishes. Intellectual property rights and ownershipAs between CSA and the users of this document (whether it be in printed or electronic form), CSA is the owner, or the authorized licensee, of all works contained herein that are protected by copyright, a

20、ll trade-marks (except as otherwise noted to the contrary), and all inventions and trade secrets that may be contained in this document, whether or not such inventions and trade secrets are protected by patents and applications for patents. Without limitation, the unauthorized use, modification, cop

21、ying, or disclosure of this document may violate laws that protect CSAs and/or others intellectual property and may give rise to a right in CSA and/or others to seek legal redress for such use, modification, copying, or disclosure. To the extent permitted by licence or by law, CSA reserves all intel

22、lectual property rights in this document.Patent rightsAttention is drawn to the possibility that some of the elements of this standard may be the subject of patent rights. CSA shall not be held responsible for identifying any or all such patent rights. Users of this standard are expressly advised th

23、at determination of the validity of any such patent rights is entirely their own responsibility.Authorized use of this documentThis document is being provided by CSA for informational and non-commercial use only. The user of this document is authorized to do only the following:If this document is in

24、 electronic form:.load this document onto a computer for the sole purpose of reviewing it;.search and browse this document; and.print this document. Limited copies of this document in print or paper form may be distributed only to persons who are authorized by CSA to have such copies, and only if th

25、is Legal Notice appears on each such copy.In addition, users may not and may not permit others to.alter this document in any way or remove this Legal Notice from the attached standard;.sell this document without authorization from CSA; or.make an electronic copy of this document.If you do not agree

26、with any of the terms and conditions contained in this Legal Notice, you may not load or use this document or make any copies of the contents hereof, and if you do make such copies, you are required to destroy them immediately. Use of this document constitutes your acceptance of the terms and condit

27、ions of this Legal Notice.National Standard of CanadaCAN/CSA-C61400-12-1:07Wind turbines Part 12-1: Power performance measurements of electricity producing wind turbinesPrepared byInternational Electrotechnical CommissionRegistered trade-mark of Canadian Standards AssociationReviewed byApproved bySt

28、andards Council of CanadaPublished in October 2007 by Canadian Standards AssociationA not-for-profit private sector organization5060 Spectrum Way, Suite 100, Mississauga, Ontario, Canada L4W 5N61-800-463-6727 416-747-4044Visit our Online Store at www.ShopCSA.caThe Canadian Standards Association (CSA

29、),under whose auspices this National Standard hasbeen produced, was chartered in 1919 andaccredited by the Standards Council of Canadato the National Standards system in 1973. It is anot-for-profit, nonstatutory, voluntary membershipassociation engaged in standards development andcertification activ

30、ities.CSA standards reflect a national consensus ofproducers and users including manufacturers,consumers, retailers, unions and professionalorganizations, and governmental agencies. Thestandards are used widely by industry and commerceand often adopted by municipal, provincial, andfederal government

31、s in their regulations, particularlyin the fields of health, safety, building andconstruction, and the environment.Individuals, companies, and associations acrossCanada indicate their support for CSAs standardsdevelopment by volunteering their time and skillsto CSA Committee work and supporting theA

32、ssociations objectives through sustainingmemberships. The more than 7000 committeevolunteers and the 2000 sustaining membershipstogether form CSAs total membership from whichits Directors are chosen. Sustaining membershipsrepresent a major source of income for CSAsstandards development activities.Th

33、e Association offers certification and testingservices in support of and as an extension to itsstandards development activities. To ensure theintegrity of its certification process, the Associationregularly and continually audits and inspects productsthat bear the CSA Mark.In addition to its head of

34、fice and laboratorycomplex in Toronto, CSA has regional branch officesin major centres across Canada and inspection andtesting agencies in eight countries. Since 1919, theAssociation has developed the necessary expertise tomeet its corporate mission: CSA is an independentservice organization whose m

35、ission is to provide anopen and effective forum for activities facilitating theexchange of goods and services through the use ofstandards, certification and related services to meetnational and international needs.For further information on CSA services, write toCanadian Standards Association5060 Sp

36、ectrum Way, Suite 100Mississauga, Ontario, L4W 5N6CanadaThe Standards Council of Canada (SCC) is thecoordinating body of the National StandardsSystem, a coalition of independent, autonomousorganizations working towards the furtherdevelopment and improvement of voluntarystandardization in the nationa

37、l interest.The principal objects of the SCC are to fosterand promote voluntary standardization as a meansof advancing the national economy, benefiting thehealth, safety, and welfare of the public, assistingand protecting the consumer, facilitating domesticand international trade, and furthering inte

38、rnationalcooperation in the field of standards.A National Standard of Canada (NSC) is a standardprepared or reviewed by an accredited StandardsDevelopment Organization (SDO) and approvedby the SCC according to the requirements of CAN-P-2.Approval does not refer to the technical content of thestandar

39、d; this remains the continuing responsibility ofthe SDO. An NSC reflects a consensus of a number ofcapable individuals whose collective interests provide,to the greatest practicable extent, a balance ofrepresentation of general interests, producers,regulators, users (including consumers), and others

40、with relevant interests, as may be appropriate to thesubject in hand. It normally is a standard which iscapable of making a significant and timely contributionto the national interest.Those who have a need to apply standards areencouraged to use NSCs. These standards are subjectto periodic review. U

41、sers of NSCs are cautionedto obtain the latest edition from the SDO whichpublishes the standard.The responsibility for approving standards asNational Standards of Canada rests with theStandards Council of Canada270 Albert Street, Suite 200Ottawa, Ontario, K1P 6N7CanadaAlthough the intended primary a

42、pplication of this Standard is stated in its Scope, it is importantto note that it remains the responsibility of the users to judge its suitability for their particular purpose.Registered trade-mark of Canadian Standards AssociationCette norme est offerte en anglais seulement pour le moment. La CSA

43、publiera la version enfranais ds quelle sera produite par lorganisme rdacteur.National Standard of CanadaCAN/CSA-C61400-12-1:07Wind turbines Part 12-1: Power performance measurements of electricity producing wind turbinesPrepared byInternational Electrotechnical CommissionRegistered trade-mark of Ca

44、nadian Standards AssociationReviewed byApproved byStandards Council of CanadaPublished in October 2007 by Canadian Standards AssociationA not-for-profit private sector organization5060 Spectrum Way, Suite 100, Mississauga, Ontario, Canada L4W 5N61-800-463-6727 416-747-4044Visit our Online Store at w

45、ww.ShopCSA.caCAN/CSA-C61400-12-1:07Wind turbines Part 12-1: Power performancemeasurements of electricity producing wind turbinesCSA/4 Canadian Standards Association October 2007CAN/CSA-C61400-12-1:07Wind turbines Part 12-1: Power performance measurements of electricity producing wind turbinesCSA Pre

46、faceThis is the first edition of CAN/CSA-C61400-12-1, Wind turbines Part 12-1: Power performance measurements of electricity producing wind turbines, which is an adoption without modification of the identically titled IEC (International Electrotechnical Commission) Standard 61400-12-1 (first edition

47、, 2005-12). At the time of publication, IEC 61400-12-1:2005 is available from IEC in English only. CSA will publish the French version when it becomes available from IEC.This Standard replaces all of CAN/CSA-F417-M91, Wind Energy Conversion Systems (WECS) Performance, except for Clause 7, which is r

48、eplaced by CAN/CSA-C61400-11:07, Wind turbine generator systems Part 11: Acoustic noise measurement techniques.The Canadian Standards Association acknowledges that the development of this Standard was made possible, in part, by the financial support of Natural Resources Canada (NRCan).This Standard

49、was reviewed for Canadian adoption by the CSA Subcommittee on Wind Turbine Power Performance Testing, under the jurisdiction of the CSA Technical Committee on Wind Turbines and the CSA Strategic Steering Committee on Requirements for Electrical Safety, and has been formally approved by the Technical Committee. This Standard has been approved as a National Standard of Canada by the Standards Council of Canada.Interpretations: The Strategic Steering Committee on Requirements for Electrical Safety has provided the following direction for the in