BS ISO 5758-2003 Cinematography - Labelling of containers for motion-picture film and magnetic material - Minimum information for exchange of materials《电影 供交换用影片及磁性(声迹)素材 容器标签的最低限内.pdf

《BS ISO 5758-2003 Cinematography - Labelling of containers for motion-picture film and magnetic material - Minimum information for exchange of materials《电影 供交换用影片及磁性(声迹)素材 容器标签的最低限内.pdf》由会员分享，可在线阅读，更多相关《BS ISO 5758-2003 Cinematography - Labelling of containers for motion-picture film and magnetic material - Minimum information for exchange of materials《电影 供交换用影片及磁性(声迹)素材 容器标签的最低限内.pdf（14页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD BS ISO 5758:2002 Cinematography Labelling of containers for motion-picture film and magnetic material Minimum information for exchange of materials ICS 37.060.20 BS ISO 5758:2002 This British Standard was published under the authority of the Standards Policy and Strategy Committee o

2、n 4 August 2003 BSI 4 August 2003 ISBN 0 580 42375 1 National foreword This British Standard reproduces verbatim ISO 5758:2002 and implements it as the UK national standard. It supersedes BS 5550-5.12.2:1988 which is withdrawn. The UK participation in its preparation was entrusted to Technical Commi

3、ttee CPW/36, Cinematography, which has the responsibility to: A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement international publications referred to in this document may be found in the BSI Cata

4、logue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its co

5、rrect application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests i

6、nformed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the ISO title page, pages ii and iii, a blank page, pages 1 to 6, an inside back cover and a back cover. The BSI copyright no

7、tice displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. Date Comments Reference number ISO 5758:2002(E) OSI 2002INTERNATIONAL STANDARD ISO 5758 Second edition 2002-08-01 Cinematography Labelling of containers for motion-picture film a

8、nd magnetic material Minimum information for exchange of materials Cinmatographie tiquetage des conteneurs pour films cinmatographiques et bandes magntiques Informations minimales pour les changes de produits BSISO5758:2002IS:8575 O2002(E) DPlcsid Fremia ihTs PDF file mc yatnoaie nmt deddebyfepca.se

9、 Icca ncnadrow eitA hebods licsneilop gnic,y tihs file mirp eb yatniv ro deewb detu slahl ton ide ebtlnu desse tt ehyfepacse wihce era hml era deddebicsnede to i dnasntlalde t noeh comtupfrep remroign tide ehti.gn Iwod nnlidaogn tihs fil,e trapies ccatpe tiereht nsnopser ehiiblity fo ton ifnriignA g

10、nebods licnesilop gnic.y I ehTStneC Oarl Scerteiraat cacpets l oniibality it nihs .aera Ai ebods a tedarmfo kra Aebod SystemI snctaropro.de teDials fo ts ehfotworp eracudts ust dec ortaet eihs PDF filc eeb na fi dnuot nlareneG eh Ifnler otait evt of ehil;e tP ehD-Fcrtaeiarap nomtesre wretpo eimizf d

11、eirp rotni.gn Evyre csah era t neebkat nesne ot eruaht tf ehili es siutlbaf esu roI yb eSO memidob rebse. It neh lnuikletneve y ttah a lborpem leratign ti ot is fnuo,d lpsaee ifnrom ttneC ehlar Secrteirata at tsserdda eh igleb nevwo. ISO 2002 Athgir lls serevr.de selnUs towrehise specfi,dei trap on

12、fo this ilbupctanoi may cudorper ebtu ro deziliyna ni de fomr yb ro nam y,snae lecetinorc m roecinahcal, inclidutohp gnocpoiym dna gnicrfoilm, wittuoh repmissii now nritif gnrom ietreh ISa Ot tserdda ehs lebwo I roSOs membre ydob it neh ctnuoo yrf ttseuqer eh.re ISO cirypothg fofice saCe tsopale 65

13、eneG 1121-HC 02 av leT. 4 + 10 947 22 1 11 xaF0 947 22 14 + 9 74 E-mial coirypthgis.oc h Web ww.wiso.ch ii ISO 2002 Allr ithgsr esedevrBSISO5758:2002IS:8575 O2002(E) I SO 2002 All irthgs ersedevr iiiForeword ISO (the International Organization for Standardization) is a worldwide federation of nation

14、al standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. Internatio

15、nal organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rule

16、s given in the ISO/IEC Directives, Part 3. The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at l

17、east 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this International Standard may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. ISO 5758 was prepared by Technical Commi

18、ttee ISO/TC 36, Cinematography. This second edition cancels and replaces the first edition (ISO 5758:1987), which has been technically revised. BSISO5758:2002blank BSISO5758:2002INTENRATIONAL TSANDADR IS:8575 O2002(E)I SO 2002 All irthgs ersedevr 1Cinematography Labelling of containers for motion-pi

19、cture film and magnetic material Minimum information for exchange of materials 1 Scope This International Standard specifies the information to be included on the label and/or accompanying documents, for identifying the contents of containers for processed motion-picture film and magnetic sound reco

20、rds. It specifies the minimum information necessary for the exchange of materials NOTE It does not apply to the labelling of containers of unexposed motion-picture films and magnetic materials specified in ISO 3042. 2 Normative reference The following normative document contains provisions which, th

21、rough reference in this text, constitute provisions of this International Standard. For dated references, subsequent amendments to, or revisions of, any of these publications do not apply. However, parties to agreements based on this International Standard are encouraged to investigate the possibili

22、ty of applying the most recent edition of the normative document indicated below. For undated references, the latest edition of the normative document referred to applies. Members of ISO and IEC maintain registers of currently valid International Standards. ISO 3640:1982, Cinematography Motion-pictu

23、re prints and sound records for international exchange of television programmes Specifications 3 Label or document information 3.1 General The information required on the label of the container (can or carton, etc.) or on the document accompanying it, depends on the type of film to be identified. Th

24、e types of film are: a) release prints other than those intended for television use, b) print for television, and c) all types of processed motion-picture film and magnetic sound records except prints. 3.2 Release prints other than those for television use 3.2.1 Non-technical information The followi

25、ng information shall be given: a) name, address, contact name and telephone number of the company or organization; BSISO5758:2002IS:8575 O2002(E) 2 I SO 2002 All irthgs ersedevrb) title of film; c) language version; d) copy number; e) reel number; f) total number of reels. 3.2.2 Technical informatio

26、n The following information shall be given: a) film gauge (width) 35 mm, 16 mm, 70 mm; b) length of reel; c) running time at 24/25/30 frames per second; d) polyester base (support)/triacetate base (support); e) positive perforations and pitch/negative perforations and pitch; f) coloured image/black-

27、and-white image; g) non-anamorphic/anamorphic image; h) aspect ratio; i) emulsion orientation in/out; j) Sound Optical Magnetic Mono CT, LT/RT Stereo/type Analogue sound track: silver, cyan or high-magenta Digital, type. 3.3 Prints for television 3.3.1 Non-technical information The following informa

28、tion shall be provided: a) company or organization name, address, contact name, telephone number; b) name of originating department; c) title of the film programme, or series of programmes; d) programme registration number; e) copy number; BSISO5758:2002IS:8575 O2002(E) I SO 2002 All irthgs ersedevr

29、 3f) number and title of episode, if applicable; g) reel number; h) total number of reels in the film or episode; i) date of packing. 3.3.2 Technical information (in accordance with ISO 3640 for the definition codes) a) special information (not specified); b) film gauge (width): 35 mm/16 mm/Super-16

30、; c) type of film stock: colour (C); black-and-white (B); magnetic film (M) (as used for the sound in SEPMAG programmes); d) aspect ratio; e) type of sound: mono; stereo type; analogue sound track: silver, cyan or high-magenta; digital type; separate magnetic track (SEPMAG); combined picture and mag

31、netic track (COMMAG); combined and optical track (COMOPT); no track (MUTE); optical disk (CD-R, etc.); f) emulsion orientation: in/out; g) position and contents of SEPMAG tracks; h) duration of reel, in minutes and seconds, at 24/25/30 frames per second; i) edge marking. BSISO5758:2002IS:8575 O2002(

32、E) 4 I SO 2002 All irthgs ersedevr3.4 All types of processed motion-picture films except prints and sound records 3.4.1 General This subclause covers all of those materials which may be used in making a motion-picture film up to, but not including, the print: original picture negative; intermediate

33、positive (master positive); duplicate negative; soundtrack negative; sound master. 3.4.2 Non-technical information The following information shall be given: a) company or organization name, address, contact name, telephone number; b) title; c) episode; d) reel number and total number of reels; e) ve

34、rsion (language, long, short, television, etc.). 3.4.3 Technical information The following information shall be given, as appropriate, for picture and sound elements: a) film type (preferably in large letters on a colour-coded background): original negative; intermediate positive (master positive);

35、duplicate negative; soundtrack negative; sound master; b) film gauge (width); c) format: non-anamorphic/anamorphic; d) aspect ratio; e) length of film on the reel, including head and tail leaders and protection leaders; f) perforation type and pitch: short or long; BSISO5758:2002IS:8575 O2002(E) I S

36、O 2002 All irthgs ersedevr 5g) base (support): triacetate/polyester; h) emulsion orientation: in/out; i) designation of the sound component(s); j) soundtrack format (1,3,4 or 6 tracks); k) soundtrack assignments; l) type of noise-reduction system; m) sound test signals contained in the leader betwee

37、n protective and synchronizing sections; n) Analogue soundtrack negative intended for: conventional (blue) silver soundtrack, high-magenta silver soundtrack, cyan dye track. BSISO5758:2002IS:8575 O2002(E) 6 I SO 2002 All irthgs ersedevrBibliography 1 ISO 3042:1992, Cinematography Labelling of contai

38、ners for raw-stock motion-picture films and magnetic films Minimum information specifications 2 ISO 12612:1997, Cinematography Interchange of post-production materials BSISO5758:2002blank BSISO5758:2002BS ISO 5758:2002 BSI 389 Chiswick High Road London W4 4AL BSI British Standards Institution BSI is

39、 the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions British Standards are updated by amendment or revision. Users of British Standards should make sur

40、e that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsi

41、ble, the identity of which can be found on the inside front cover. Tel: +44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all

42、BSI, international and foreign standards publications should be addressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 8996 7001. Email: ordersbsi-. Standards are also available from the BSI website at http:/www.bsi-. In response to orders for international standards, it is BSI pol

43、icy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service

44、. Various BSI electronic information services are also available which give details on all its products and services. Contact the Information Centre. Tel: +44 (0)20 8996 7111. Fax: +44 (0)20 8996 7048. Email: infobsi-. Subscribing members of BSI are kept up to date with standards developments and re

45、ceive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel: +44 (0)20 8996 7002. Fax: +44 (0)20 8996 7001. Email: membershipbsi-. Information regarding online access to British Standards via British Standards Online

46、can be found at http:/www.bsi- Further information about BSI is available on the BSI website at http:/www.bsi-. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under th

47、e Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementi

48、ng the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. Details and advice can be obtained from the Copyright & Licensing Manager. Tel: +44 (0)20 8996 7070. Fax: +44 (0)20 8996 7553. Email: copyrightbsi-.