BS ISO 20859-2005 Cinematography - Spectral response of photographic audio reproducers for analog dye sound tracks on 35 mm film《电影摄影学 35 mm胶片上模拟染色声带用摄影还音器的光谱响应》.pdf

《BS ISO 20859-2005 Cinematography - Spectral response of photographic audio reproducers for analog dye sound tracks on 35 mm film《电影摄影学 35 mm胶片上模拟染色声带用摄影还音器的光谱响应》.pdf》由会员分享，可在线阅读，更多相关《BS ISO 20859-2005 Cinematography - Spectral response of photographic audio reproducers for analog dye sound tracks on 35 mm film《电影摄影学 35 mm胶片上模拟染色声带用摄影还音器的光谱响应》.pdf（10页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD BS ISO 20859:2005 Cinematography Spectral response of photographic audio reproducers for analog dye sound tracks on 35 mm film ICS 37.060.20 BS ISO 20859:2005 This British Standard was published under the authority of the Standards Policy and Strategy Committee on 3 October 2005 BSI

2、 3 October 2005 ISBN 0 580 46649 3 National foreword This British Standard reproduces verbatim ISO 20859:2005 and implements it as the UK national standard. The UK participation in its preparation was entrusted to Technical Committee CPW/36, Cinematography, which has the responsibility to: A list of

3、 organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement international publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondenc

4、e Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itsel

5、f confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep UK interests informed; monitor related international and European developments and promul

6、gate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the ISO title page, pages ii and iii, a blank page, pages 1 and 2, an inside back cover and a back cover. The BSI copyright notice displayed in this document indicates when the document was last issue

7、d. Amendments issued since publication Amd. No. Date Comments Reference number ISO 20859:2005(E)INTERNATIONAL STANDARD ISO 20859 First edition 2005-06-15 Cinematography Spectral response of photographic audio reproducers for analog dye sound tracks on 35 mm film Cinmatographie Rponse spectrale de le

8、cteurs audio avec des pistes sonores analogiques de couleurs sur film de tirage 35 mm BS ISO 20859:2005 ii BS ISO 20859:2005 iii Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing Interna

9、tional Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with

10、ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical

11、committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to t

12、he possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. ISO 20859 was prepared by Technical Committee ISO/TC 36, Cinematography. blank 1 Cinematography Spectral response of photogr

13、aphic audio reproducers for analog dye sound tracks on 35 mm film 1 Scope This International Standard specifies the spectral response of the photographic audio reproducer light source and receptor as a unit, including any optical filtering that can be interposed. The analog sound track formats suita

14、ble for reproduction using such a reproducer include the cyan dye-only track (without redevelopment of silver) and both conventional and “high magenta” soundtracks (with redevelopment of silver). 2 Spectral response 2.1 The peak or maximum response of the combined audio reproducer light source, filt

15、er and receptor shall be 660 nm 20 30 + nm. 2.2 The integrated response of the unit to all wavelengths greater than 800 nm shall be less than 5 % of the total integrated response measured from 400 nm to 800 nm. BS ISO 20859:2005 BS ISO 20859:2005 2 Annex A (informative) Additional data The reproduct

16、ion of analog photographic sound tracks has long employed a tungsten light source and an infrared-sensitive photocell. The light beam is modulated by changes in the infrared energy absorption of the silver sound track image. This practice dates from black and white practice. When colour release prin

17、ts were introduced, the practice of redeveloping a silver sound track, which consists of silver, magenta dye and cyan dye, was employed in order to maintain compatibility with all existing infrared-sensitive reproducers fitted to projectors. A change to dye-only sound tracks is taking place in order

18、 to provide environmental and other benefits. The elimination of the need for silver sound track redevelopment will allow a simplification of the colour positive process with savings in the use of hazardous chemicals and water. Discontinuation of silver redevelopment in release prints will eliminate

19、 the discharge of silver into the environment because, when used, release prints are ultimately destroyed. The red-sensitive sound reproducers required for dye tracks employ solid-state light emitting diodes (LED) or lasers with a longer lifetime than tungsten lamps, providing increased reliability

20、of sound reproduction in theatres. The conversion of sound reproducers from infrared-sensitive devices (for silver sound tracks) to red-sensitive devices (for cyan dye sound tracks) requires an intermediate sound track format called “high magenta”. The “high magenta” sound track eliminates the cyan

21、dye from the silver sound track, thus making the transmission level from 600 nm to 1 000 nm almost equal. This almost equal transmission range produces good sound quality, including cancellation of cross-modulation distortion, for infrared-sensitive readers and all types of red-sensitive readers. A

22、dye-only soundtrack needs to use the dye density to modulate the scanning beam. Unlike the silver density that exists at all wavelengths, the cyan dye in film does not have sufficient density to modulate the scanning beam at wavelengths of less than 600 nm and at wavelengths of greater than 750 nm.

23、Reading the cyan dye-only soundtrack too far away from its wavelength of maximum absorption will cause degradation of sound quality (higher cross-modulation distortion, lower high-frequency response and lower signal-to-noise ratio). The purpose of limiting the spectral response of the audio reproduc

24、er is to use advantageously the absorption of the cyan dye image to modulate the scanning beam and to maintain the maximum sound quality of which the cyan dye record is capable. blankBS ISO 20859:2005 BSI 389 Chiswick High Road London W4 4AL BSI British Standards Institution BSI is the independent n

25、ational body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions British Standards are updated by amendment or revision. Users of British Standards should make sure that they posses

26、s the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity

27、of which can be found on the inside front cover. Tel: +44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international

28、 and foreign standards publications should be addressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 8996 7001. Email: ordersbsi-. Standards are also available from the BSI website at http:/www.bsi-. In response to orders for international standards, it is BSI policy to supply the

29、BSI implementation of those that have been published as British Standards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI elec

30、tronic information services are also available which give details on all its products and services. Contact the Information Centre. Tel: +44 (0)20 8996 7111. Fax: +44 (0)20 8996 7048. Email: infobsi-. Subscribing members of BSI are kept up to date with standards developments and receive substantial

31、discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel: +44 (0)20 8996 7002. Fax: +44 (0)20 8996 7001. Email: membershipbsi-. Information regarding online access to British Standards via British Standards Online can be found at ht

32、tp:/www.bsi- Further information about BSI is available on the BSI website at http:/www.bsi-. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Desig

33、ns and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, o

34、f necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. Details and advice can be obtained from the Copyright & Licensing Manager. Tel: +44 (0)20 8996 7070. Fax: +44 (0)20 8996 7553. Email: copyrightbsi-.