BS EN ISO 14744-4-2001 Welding Acceptance inspection of electron beam welding machines Measurement of welding speed《焊接 电子束焊接机的验收检验 焊接速度的测量》.pdf

《BS EN ISO 14744-4-2001 Welding Acceptance inspection of electron beam welding machines Measurement of welding speed《焊接 电子束焊接机的验收检验 焊接速度的测量》.pdf》由会员分享，可在线阅读，更多相关《BS EN ISO 14744-4-2001 Welding Acceptance inspection of electron beam welding machines Measurement of welding speed《焊接 电子束焊接机的验收检验 焊接速度的测量》.pdf（10页珍藏版）》请在麦多课文档分享上搜索。

1、| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | BRITISH STANDARD BS EN ISO 14744-4:2001 Th

2、e European Standard EN ISO 14744-4:2000 has the status of a British Standard ICS 25.160.30 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW Welding Acceptance inspection of electron beam welding machines Part 4: Measurement of welding speedThis British Standard, having been pre

3、pared under the direction of the Engineering Sector Committee, was published under the authority of the Standards Committee and comes into effect on 15 April 2001 BSI 04-2001 ISBN 0 580 34193 3 BS EN ISO 14744-4:2001 Amendments issued since publication Amd. No. Date Comments National foreword This B

4、ritish Standard is the official English language version of EN ISO 14744-4:2000. It is identical with ISO 14744-4:2000. The UK participation in its preparation was entrusted to Technical Committee WEE/47, Miscellaneous welding standards, which has the responsibility to: aid enquirers to understand t

5、he text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. A list of organizations represented on this co

6、mmittee can be obtained on request to its secretary. Cross-references Attention is drawn to the fact that CEN and CENELEC Standards normally include an annex which lists normative references to international publications with their corresponding European publications. The British Standards which imp

7、lement these international or European publications may be found in the BSI Standards Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Find” facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the

8、 necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, the EN title pag

9、e, pages 2 to 6, an inside back cover and a back cover. The BSI copyright notice displayed in this document indicates when the document was last issued.EUROPEANSTANDARD NORMEEUROPENNE EUROPISCHENORM ENISO147444 April2000 ICS25.160.00 Englishversion WeldingAcceptanceinspectionofelectronbeamwelding ma

10、chinesPart4:Measurementofweldingspeed(ISO14744 4:2000) SoudageEssaisderceptiondesmachinesdesoudage parfaisceaudlectronsPartie4:Mesuredelavitessede soudage(ISO147444:2000) SchweienAbnahmeprfungvonElektronenstrahl SchweimaschinenTeil4:Messender Schweigeschwindigkeit(ISO147444:2000) ThisEuropeanStandar

11、dwasapprovedbyCENon3January2000. CENmembersareboundtocomplywiththeCEN/CENELECInternalRegulationswhichstipulatetheconditionsforgivingthisEurope an Standardthestatusofanationalstandardwithoutanyalteration.Uptodatelistsandbibliographicalreferencesconcernings uchnational standardsmaybeobtainedonapplicat

12、iontotheCentralSecretariatortoanyCENmember. ThisEuropeanStandardexistsinthreeofficialversions(English,French,German).Aversioninanyotherlanguagemadebytra nslation undertheresponsibilityofaCENmemberintoitsownlanguageandnotifiedtotheCentralSecretariathasthesamestatusast heofficial versions. CENmembersa

13、rethenationalstandardsbodiesofAustria,Belgium,CzechRepublic,Denmark,Finland,France,Germany,Greece, Iceland,Ireland,Italy,Luxembourg,Netherlands,Norway,Portugal,Spain,Sweden,SwitzerlandandUnitedKingdom. EUROPEANCOMMITTEEFORSTANDARDIZATION COMITEUROPENDENORMALISATION EUROPISCHESKOMITEEFRNORMUNG Centra

14、lSecretariat:ruedeStassart,36B1050Brussels 2000CEN Allrightsofexploitationinanyformandbyanymeansreserved worldwideforCENnationalMembers. Ref.No.ENISO147444:2000EPage2 ENISO147444:2000 Contents Page Foreword. 3 1 Scope 4 2 Normativereferences. 4 3 Testarrangement 4 3.1 Electricaltestarrangement 4 3.2

15、 Mechanicaltestarrangement 5 4 Measurementprocedure 5 4.1 General . 5 4 . 2 R o t a t i o n d e v i c e 5 4.3 Measuringtheshorttermstability. 6 4.4 Measuringthelongtermstability. 6 4.5 Measuringthereproducibility 6 5 Evaluation. 6Page3 ENISO147444:2000 Foreword ThetextofENISO147443:2000hasbeenprepar

16、edbyTechnicalCommitteeCEN/TC121“Welding“,the secretariatofwhichisheldbyDS,incollaborationwithTechnicalCommitteeISO/TC44“Weldingandallied processes“. ThisEuropeanStandardshallbegiventhestatusofanationalstandard,eitherbypublicationofanidenticaltextor byendorsement,atthelatestbyOctober2000,andconflicti

17、ngnationalstandardsshallbewithdrawnatthelatest byOctober2000. AccordingtotheCEN/CENELECInternalRegulations,thenationalstandardsorganizationsof thefollowing countriesareboundtoimplementthisEuropeanStandard:Austria,Belgium,CzechRepublic,Denmark,Finland, France,Germany,Greece,Iceland,Ireland,Italy,Luxe

18、mbourg,Netherlands,Norway,Portugal,Spain,Sweden, SwitzerlandandtheUnitedKingdom. ThisdraftEuropeanStandardiscomposedofthesixfollowingparts: Part1:Principlesandacceptanceconditions; Part2:Measurementofacceleratingvoltagecharacteristics; Part3:Measurementofbeamcurrentcharacteristics; Part4:Measurement

19、ofweldingspeed; Part5:Measurementofrunoutaccuracy; Part6:Measurementofstabilityofspotposition.Page4 ENISO147444:2000 1Scope Thisstandardisintendedforusewhentheweldingspeedforelectronbeamweldingmachinescomplyingwith ENISO147441istobemeasuredinconnectionwithanacceptanceinspection.Itprovidesessentialin

20、formation ontheprocedureandapparatustobeusedformakingthemeasurements. Alternativestandardisedprocedurescanbeused,providedtheyhaveatleastthesameacceptanceinspectionas theweldsspecifiedinthispart4.Themeasuredparameteristhespeedofthetranslationalandrotational movementsrequiredtoperformtheweldingoperati

21、on. Theweldingspeedisoneofthesignificantparametersinelectronbeamwelding.Theworkpieceortheweldpoint shallthusbemovedatauniformspeed,inareproduciblemanner,withingivenshorttermandlongtermlimits.The purposeofthemeasurementistocheckwhetherthevariationsinweldingspeedaremaintainedwithintheselimits. 2Normat

22、ivereferences ThisEuropeanStandardincorporatesbydatedorundatedreference,provisionsfromotherpublications.These normativereferencesarecitedattheappropriateplacesinthetextandthepublicationsarelistedhereafter.For datedreferences,subsequentamendmentstoorrevisionsofanyofthesepublicationsapplytothisEuropea

23、n Standardonlywhenincorporatedinitbyamendmentorrevision.Forundatedreferencesthelatesteditionofthe publicationreferredtoapplies(includingamendments). ENISO147441:2000 WeldingAcceptanceinspectionofelectronbeamweldingmachinesPart1:Principlesanda c c e p t a n c e conditions(ISO147441:2000) 3Testarrange

24、ment 3.1Electricaltestarrangement Totakeaccountofallinterferencesaffectingtheweldingspeed,themeasurementshallbemadedirectlyonthe workpieceoronthedevicepositioningtheworkpieceoronamovableelectrongun,ifappropriate.Suitable transducers,withalinearresponse,maybeusedtotransmitthetranslationalorrotational

25、movement,e.g.rotary transducers,viaahardrubberfrictionwheel(seefigures1and2). Buildinencodersorresolversmayalsobeused,ifdirectlyconnectedtothemovingdevices. Surfaceroughnessinm. Key 1Worktable 2Contactstrip 3Rotarytransducerfixedtononmovingpart Figure1Exampleofarrangementformeasuringthespeedoftransl

26、ationalmovementsPage5 ENISO147444:2000 Surfaceroughnessinm Key 1Rotatingdevice 2Rotarytransducer 3Flexiblemetalanglefixedtononmovingpart 4Contactring Figure2Exampleofarrangementformeasuringthespeedofrotationalmovements 3.2Mechanicaltestarrangement Aspecialsupporthastobeusedtoeffectmechanicalcontactb

27、etweentransducerandthedevicepositioningthe workpiece. Forgreateraccuracyofmeasurement,thisspecialsupporthastofulfillthefollowingrequirements: a)itshallkeepthetransducerfirmlyinplacewithminimumvibration,e.g.ontheworktablesupporting structureorontheworkchamber.Insomecases,multiaxialsupportofthetransdu

28、cermightbenecessary; b)itshallallowforacertainyieldinthecontactbetweenfrictionwheelandcontactsurface,e.g.bymeansof aresilientmetalangle(seefigure2).Anyslipoccurringisatonceevidentinthemeasurementandcanbe compensatedforbyslightlyincreasingthepressureapplication. Rotarytransducersmayalsobeusedforspeed

29、measurementsundervacuum.Relevantinformationmaybe obtainedfromthemanufacturerofthetransducer.Forsuchmeasurement,afeedthroughtoaccommodatea multicorecableisrequiredforconnectingthetransducerandthefrequencyvoltageconverter. 4Measurementprocedure 4.1General Themeasurementsshallbecarriedoutwiththewelding

30、machinesetasspecifiedin6.3of ENISO147441:2000. Unlessotherwisespecifiedthemeasurementsmaybecarriedoutwiththechambervented. 4.2Rotationdevice Incaseofrotationalmovements,measurementsshallbemadeatthemaximumandminimumrevolutionofthe rotationdevicecalculatedasfollows:Page6 ENISO147444:2000 4.3Measuringt

31、heshorttermstability Anoscilloscopeshallbeusedtodeterminethemaximumrange(peaktopeakvalue)intheinstantaneousvalue U v ofthemonitoredvoltage, U v . Thepercentagedeviationshallbecalculatedasfollows: where U vmax , U vmin and U v aremaximum,minimumandaveragevaluesobservedduringtheperiodof observation. 4

32、.4Measuringthelongtermstability Theaveragevoltageshallberecordedcontinuouslyforagivenoperatingperiod,usinganinstrumenteliminating ripple. Thepercentagedeviationshallbecalculatedasfollows: whicheveristhelargestandwhere U vmax and U vmin aremaximumandminimumobservedvaluesand U v isthe initialvalue. 4.

33、5Measuringthereproducibility Thepositioningdevicesshallbeswitchedonandtheaveragemonitoredvoltageshallbemeasured,usingan instrumenteliminatingripple. Thepositioningdevicesshallsubsequentlybeswitchedoffandonseveraltimesandthecorrespondingaverage monitoredvoltagesshallberecorded. Thereproducibilityshal

34、lbecalculatedasfollows: whicheveristhegreaterwhere U vmax and U vmin aremaximumandminimumaveragevaluesobservedand U v is theinitialvalue. 5Evaluation Themeasuredvaluesofshorttermandlongtermstabilityandthereproducibilitylimitsshallbeassessedby comparingthemwiththelimitdeviationsspecifiedinENISO147441

35、.BS EN ISO 14744-4:2001 BSI 389 Chiswick High Road London W4 4AL | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |

36、 | | | | | | | | | BSI British Standards Institution BSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions British Standards are updated by amendm

37、ent or revision. Users of British Standards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard wou

38、ld inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: 020 8996 9000. Fax: 020 8996 7400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions

39、 of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: 020 8996 9001. Fax: 020 8996 7001. Standards are also available from the BSI website at http:/www.bsi-. In response to orders for international standard

40、s, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to E

41、xporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Information Centre. Tel: 020 8996 7111. Fax: 020 8996 7048. Subscribing members of BSI are kept up to date with standards developments and receive substan

42、tial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel: 020 8996 7002. Fax: 020 8996 7001. Further information about BSI is available on the BSI website at http:/www.bsi-. Copyright Copyright subsists in all BSI publications.

43、 BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopy

44、ing, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. If permission is granted, the terms may include royalty payments or a licensing agreement. Details and advice can be obtained from the Copyright Manager. Tel: 020 8996 7070.