BS EN ISO 2286-2-2016 Rubber- or plastics-coated fabrics Determination of roll characteristics Methods for determination of total mass per unit area mass per unit area of coating a.pdf

《BS EN ISO 2286-2-2016 Rubber- or plastics-coated fabrics Determination of roll characteristics Methods for determination of total mass per unit area mass per unit area of coating a.pdf》由会员分享，可在线阅读，更多相关《BS EN ISO 2286-2-2016 Rubber- or plastics-coated fabrics Determination of roll characteristics Methods for determination of total mass per unit area mass per unit area of coating a.pdf（18页珍藏版）》请在麦多课文档分享上搜索。

1、BS EN ISO 2286-2:2016Rubber- or plastics-coatedfabrics Determination of rollcharacteristicsPart 2: Methods for determination of totalmass per unit area, mass per unit area ofcoating and mass per unit area of substrate(ISO 2286-2:2016)BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 1

2、5/05/2013 15:06BS EN ISO 2286-2:2016 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN ISO 2286-2:2016. It supersedes BS EN ISO 2286-2:1998 which is withdrawn.The UK participation in its preparation was entrusted to Technical Committee TCI/69, Footwear, leather an

3、d coated fabrics.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2016. Publi

4、shed by BSI Standards Limited 2016ISBN 978 0 580 85471 2 ICS 59.080.40 Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 October 2016.Amendments/corrigenda issu

5、ed since publicationDate Text affectedEUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 2286-2 October 2016 ICS 59.080.40 Supersedes EN ISO 2286-2:1998English Version Rubber- or plastics-coated fabrics - Determination of roll characteristics - Part 2: Methods for determination of total mass p

6、er unit area, mass per unit area of coating and mass per unit area of substrate (ISO 2286-2:2016) Supports textiles revtus de caoutchouc ou de plastique - Dtermination des caractristiques des rouleaux - Partie 2: Mthodes de dtermination de la masse surfacique totale, de la masse surfacique du revtem

7、ent et de la masse surfacique du support (ISO 2286-2:2016) Mit Kautschuk oder Kunststoff beschichtete Textilien - Bestimmung der Rollencharakteristik - Teil 2: Bestimmung der flchenbezogenen Gesamtmasse, der flchenbezogenen Masse der Beschichtung und der flchenbezogenen Masse des Trgers (ISO 2286-2:

8、2016) This European Standard was approved by CEN on 1 September 2016. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographi

9、cal references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility

10、 of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of

11、Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey andUnited Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION

12、EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2016 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 2286-2:2016 EBS EN ISO 2286-2:2016EN ISO 2286-2:2016 (E) 3 European foreword T

13、his document (EN ISO 2286-2:2016) has been prepared by Technical Committee ISO/TC 45 “Rubber and rubber products” in collaboration with Technical Committee CEN/TC 248 “Textiles and textile products” the secretariat of which is held by BSI. This European Standard shall be given the status of a nation

14、al standard, either by publication of an identical text or by endorsement, at the latest by April 2017, and conflicting national standards shall be withdrawn at the latest by April 2017. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rig

15、hts. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN ISO 2286-2:1998. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European St

16、andard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,

17、Spain, Sweden, Switzerland, Turkey and the United Kingdom. Endorsement notice The text of ISO 2286-2:2016 has been approved by CEN as EN ISO 2286-2:2016 without any modification. BS EN ISO 2286-2:2016ISO 2286-2:2016(E)Foreword ivIntroduction v1 Scope . 12 Normative references 13 Determination of tot

18、al mass per unit area 13.1 Apparatus 13.2 Preparation of test pieces 23.3 Procedure 23.4 Calculation and expression of results 23.5 Test report . 24 Determination of mass per unit area of substrate 34.1 General . 34.2 Principle 34.3 Reagent 34.4 Apparatus 34.5 Procedure 34.6 Calculation and expressi

19、on of results 44.7 Test report . 45 Determination of mass per unit area of coating 45.1 Procedure 45.2 Test report . 4Annex A (normative) Coating - removal methods . 5 ISO 2016 All rights reserved iiiContents PageBS EN ISO 2286-2:2016ISO 2286-2:2016(E)ForewordISO (the International Organization for

20、Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the r

21、ight to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.The procedur

22、es used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial r

23、ules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights iden

24、tified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents).Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.For an explanation

25、on the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISOs adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following URL: Foreword Supplementary informationThe committee responsi

26、ble for this document is ISO/TC 45, Rubber and rubber products title, Subcommittee SC 4, Products (other than hoses).This second edition cancels and replaces the first edition (ISO 2286-2:1998), which has been technically revised. The changes are as follows: in 3.1.1, the accuracy of the balance has

27、 been changed; in 3.2, the usable width of the sample has been clearly specified; in 3.3, the drying process has been changed to optional and the conditioning atmosphere has been specified more clearly; in 3.5 and 4.7, item b) has been added; in 4.5.3, the conditioning atmosphere has been specified

28、more clearly.ISO 2286 consists of the following parts, under the general title Rubber or plastics coated fabrics Determination of roll characteristics: Part 1: Methods for determination of length, width and net mass Part 2: Methods for determination of total mass per unit area, per unit area of coat

29、ing and mass per unit area of substrate Part 3: Method for determination of thicknessiv ISO 2016 All rights reservedBS EN ISO 2286-2:2016ISO 2286-2:2016(E)IntroductionThe total mass per unit area of a material, the mass per unit area of the substrate cloth and the mass per unit area of the coating a

30、re quantities which define the basic quality of a coated fabric and determine many of its physical properties. The substrate cloth mass determined by these methods does not necessarily represent the mass of the substrate cloth in the uncoated state. For example, in the case of coated fabrics in whic

31、h a bonding agent has been used, the substrate cloth mass determined may be substantially higher than the uncoated mass because the prescribed treatment has not removed the entire coating. This will be particularly so in cases where the substrate cloth is made from multifilament or spun-fibre yarns.

32、 Dimensional changes in the substrate cloth during processing may also occur. ISO 2016 All rights reserved vBS EN ISO 2286-2:2016BS EN ISO 2286-2:2016Rubber- or plastics-coated fabrics Determination of roll characteristics Part 2: Methods for determination of total mass per unit area, mass per unit

33、area of coating and mass per unit area of substrateWARNING Persons using this International Standard should be familiar with normal laboratory practice. This International Standard does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of th

34、e user to establish appropriate safety and health practices and to ensure compliance with any national regulatory conditions.1 ScopeThis part of ISO 2286 specifies methods of determining the total mass per unit area, the mass per unit area of the coating and the mass per unit area of the substrate c

35、loth of a rubber- or plastics-coated fabric. Methods for removing coatings of specific compositions are described in Annex A.2 Normative referencesThe following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references

36、, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.ISO 2231:1989, Rubber- or plastics-coated fabrics Standard atmospheres for conditioning and testing3 Determination of total mass per unit area3.1 Apparatus3.1.1

37、Balance, capable of reading to 1 mg or less.3.1.2 Means of maintaining an atmosphere with a relative humidity not greater than 10 % and a temperature of 65 C 5 C.NOTE Air at 20 C and 65 % relative humidity, when heated at constant pressure to 65 C 5 C, will have a relative humidity of approximately

38、5 %. Higher temperatures can lead to changes in some coatings.3.1.3 Cutter, capable of cutting, from the sample of coated fabric, a test piece of area 100 cm2 1 cm2.NOTE It has been found convenient to use a circular cutter for this purpose, but square or rectangular test pieces can be used provided

39、 they are within the accuracy specified above.INTERNATIONAL STANDARD ISO 2286-2:2016(E) ISO 2016 All rights reserved 1BS EN ISO 2286-2:2016ISO 2286-2:2016(E)3.2 Preparation of test piecesUsing the cutter (3.1.3) cut five test pieces from the sample, from positions spaced reasonably evenly and close

40、to the diagonal across the usable width of the sample excluding 50 mm from the edge of the sample so that the full width of the coated fabric is represented.Do not take any test pieces within 1 m of a production-manufactured roll end.3.3 ProcedureUnless otherwise agreed between the interested partie

41、s to skip the drying process, dry the test pieces to constant mass in an atmosphere with a relative humidity not higher than 10 % at a temperature of 65 C 5 C.Condition the test pieces in accordance with the method of conditioning “1” in ISO 2231:1989 and, without removing them from the conditioning

42、 atmosphere, determine the mass of each to the nearest 5 mg and the surface area of each to within 1 %.NOTE Any estimate of the mass per unit area of the coated fabric derived from the total net mass of the roll and its known length and width may be inaccurate because a complete roll of coated fabri

43、c cannot normally be conditioned to equilibrium in a standard atmosphere. Such inaccuracies are due to excesses or deficiencies in moisture regain through the complete roll.3.4 Calculation and expression of resultsFor each of the five test pieces, calculate the total mass per unit area, M, in grams

44、per square metre, using Formula (1):MmA=104(1)wherem is the mass of the test piece, in grams;A is the area of the test piece, in square centimetres.Calculate the mean of the five determinations, expressing the final result to the nearest 1 g/m2.Take this mean as the total mass per unit area of the m

45、aterial under test.3.5 Test reportThe test report shall include the following information:a) a reference to this part of ISO 2286, i.e. ISO 2286-2;b) the condition at the time of conditioning and the test;c) a complete description of the coated fabric;d) the mean value, in grams per square metre, of

46、 the total mass per unit area obtained from the five test pieces;e) details of any deviations from the procedure specified;f) the date of the determination.2 ISO 2016 All rights reservedBS EN ISO 2286-2:2016ISO 2286-2:2016(E)4 Determination of mass per unit area of substrateCAUTION Some of the solve

47、nts used may be toxic, flammable or otherwise hazardous. Care in the handling of such materials must be exercised. The inhalation of vapours should be avoided. Suitable protective clothing, including gloves and goggles, should be worn when appropriate. It is recommended that a suitable eyewash be ke

48、pt in a position convenient for use. Any further precautionary measures recommended by the solvent manufacturer should be followed.4.1 GeneralThe procedure specified for removing the coating from the substrate cloth is governed both by the nature of the coating and by the nature of the substrate, an

49、d indeed for some types of coating there will be no known method of removal. Where this is the case, it shall be reported in the test report.4.2 PrincipleThe coating is removed with a stripping agent from the same test pieces as were used for the determination of the total mass per unit area. The stripped test pieces are dried, conditioned and weighed. The procedure is repeated until constant mass is reached.4.3 Reagent4.3.1 Suitable solvent system (stripping agent), which has no solvent or chemical action on th