BS EN 50553-2012 Railway applications Requirements for running capability in case of fire on board of rolling stock《轨道交通 假设铁道机车车辆运行中起火条件下的运行能力要求》.pdf

《BS EN 50553-2012 Railway applications Requirements for running capability in case of fire on board of rolling stock《轨道交通 假设铁道机车车辆运行中起火条件下的运行能力要求》.pdf》由会员分享，可在线阅读，更多相关《BS EN 50553-2012 Railway applications Requirements for running capability in case of fire on board of rolling stock《轨道交通 假设铁道机车车辆运行中起火条件下的运行能力要求》.pdf（42页珍藏版）》请在麦多课文档分享上搜索。

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN 50553:2012Railway applications Requirements for runningcapability in case of fire onboard of rolling stockCopyright European Committee for Electrotechnical Standardization

2、Provided by IHS under license with CENELECNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 50553:2012 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 50553:2012.The UK participation in its preparation was entrusted to Tech

3、nicalCommittee GEL/9/-/2, Railway Electrotechnical Applications -Running capability in the case of fire.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are r

4、esponsible for its correctapplication. The British Standards Institution 2012. Published by BSI StandardsLimited 2012ISBN 978 0 580 70630 1ICS 13.220.50; 45.060.01Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority o

5、f theStandards Policy and Strategy Committee on 31 March 2012.Amendments issued since publicationDate Text affectedCopyright European Committee for Electrotechnical Standardization Provided by IHS under license with CENELECNot for ResaleNo reproduction or networking permitted without license from IH

6、S-,-,-BS EN 50553:2012EUROPEAN STANDARD EN 50553 NORME EUROPENNE EUROPISCHE NORM February 2012 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Management Centre: Avenue Marnix 17, B - 100

7、0 Brussels 2012 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 50553:2012 E ICS 13.220.50; 45.060.01 English version Railway applications - Requirements for running capability in case of fire on board of rolling stock Application

8、s ferroviaires - Exigences en matire daptitude au roulement en cas dincendie bord des vhicules ferroviaires Bahnanwendungen - Anforderungen an die Fahrfhigkeit im Brandfall an Bord von Bahnfahrzeugen This European Standard was approved by CENELEC on 2012-01-23. CENELEC members are bound to comply wi

9、th the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Mana

10、gement Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the

11、 same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Neth

12、erlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Copyright European Committee for Electrotechnical Standardization Provided by IHS under license with CENELECNot for ResaleNo reproduction or networking permitted without license

13、 from IHS-,-,-BS EN 50553:2012EN 50553:2012 - 2 - Contents Foreword 4Introduction . 51 Scope 72 Normative references 73 Terms and definitions 84 Symbols and abbreviated terms . 105 Methodology 115.1 Principles 115.2 Fire Classification Scheme . 115.3 Application 126 Verification of compliance . 156.

14、1 Specific requirements . 156.2 Decision Box 1 - Existence of a Type 2 (or Type 3) fire . 156.3 Decision Box 2 - Individual system function . 196.4 Decision Box 3 - Redundant array system function 216.5 Decision Box 4 - Presence of a fire fighting system . 226.6 Decision Box 5 - Degraded mode . 25An

15、nex A (informative) Existing standards and background . 27Annex B (normative) Determination of compliance for degraded mode 29B.1 First method 29B.2 Second method . 29Annex C (informative) Passenger “Field“) Modelling. 31C.3 Demonstration of Fire Detection by Test 31C.4 Fire Fighting Assessment . 33

16、Annex D (informative) Example of an approach to CFD validation . 35Annex E (informative) Guidance for a system function approach . 36Annex ZZ (informative) Coverage of Essential Requirements of EC Directives . 37Bibliography 38Figures Figure 1 Decision box flow chart . 14Figure 2 Decision box 1 flow

17、 chart 17Figure C.1 Plan View : Standard chamber with additional fog generator 33Figure C.2 Side View : Fog Generator and fire source . 33Copyright European Committee for Electrotechnical Standardization Provided by IHS under license with CENELECNot for ResaleNo reproduction or networking permitted

18、without license from IHS-,-,-BS EN 50553:2012- 3 - EN 50553:2012 Tables Table B.1 Formulae for calculating the progression of the train . 30Table E.1 Cross-reference: system function and clauses 36Copyright European Committee for Electrotechnical Standardization Provided by IHS under license with CE

19、NELECNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 50553:2012EN 50553:2012 - 4 - Foreword This document (EN 50553:2012) has been prepared by CLC/TC 9X, “Electrical and electronic applications for railways“. The following dates are fixed: latest date by whic

20、h this document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2013-01-23 latest date by which the national standards conflicting with this document have to be withdrawn (dow) 2015-01-23 Attention is drawn to the possibility that some

21、 of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CENELEC by the European Commission and the European Free Trade Association a

22、nd supports essential requirements of EU Directives 96/48/EC (HSR) and 2001/16/EC (CONRAIL), both recast by 2008/57/EC (RAIL). For the relationship with EU Directive(s) see informative Annex ZZ, which is an integral part of this document. _ Copyright European Committee for Electrotechnical Standardi

23、zation Provided by IHS under license with CENELECNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 50553:2012- 5 - EN 50553:2012 Introduction The purpose of this European Standard is to define requirements for running capability under fire conditions which are

24、applicable to railway rolling stock with passengers, so that a train will be able to reach a “safe area“ as defined in the Safety in Rail Tunnels TSI (TSI SRT) 1.1.3. Specifically, this standard is intended to clarify and rationalise the requirements for rolling stock running capability in the EN 45

25、545 series (Operation Categories 2, 3 and 4) and in the TSI SRT (Fire Safety Categories A and B). It is also intended to define specific technical measures, compliance with which will allow a Presumption of Conformity with the TSI SRT to be made by the Notified Body assessing the Rolling Stock. NOTE

26、 1 In several cases it might appear that requirements are included which are duplicating requirements given in the EN 45545 series and/or which are dealt with in other ways by the EN 45545 series. This is not the intention and is not the case. The EN 45545 series introduces running capability functi

27、onal requirements but does not generally define how they are to be met nor to what level of performance. Also, a number of requirements which are included in the EN 45545 series, would be relevant to, or suitable for, running capability use but are not identified for this use within the TS. It is th

28、erefore necessary to include requirements which are apparently duplicating the EN 45545 series in this standard but which actually do not duplicate the TS when examined in detail. If desired it should be possible, when converting EN 45545 to an EN, to include these requirements during the process wh

29、ich would allow them to be removed from this standard. Reference to Annex A shows that it is necessary for this standard specifically to address 4.2.5.5 of the TSI SRT. This standard considers the requirement to “improve the probability that a passenger train with a fire on board will continue to op

30、erate“ in a “reasonably practicable“ context. It is understood that “train“ includes all vehicles such as locomotives and power cars which are associated with the passenger vehicles. Requirements for running capability cannot be defined without a knowledge of other fire characteristics of the train,

31、 specifically its reaction to fire and fire resistance specification. The assumption is made that the fire standard applied is the EN 45545 series or any standard for which technical equivalence can be demonstrated. NOTE 2 In defining conditions to assure running capability it is only the intention

32、to define requirements which allow the train to remain capable of controlled movement. The general safety level of the train when operating under these conditions (for example the level of lighting within the saloon) is not within the scope. Matters such as this are dealt with in other standards (in

33、cluding, but not limited to, the EN 45545 series). The standard defines requirements based on a philosophy which recognises that stopping a train is not itself a life-threatening event. It is therefore not required to have running capability for all fires; only those fires which may cause serious in

34、jury and/or develop to threaten life. For example, situations such as the combustion of an individual electrical component inside a technical cabinet meeting criteria for fire resistance in accordance with the EN 45545 series, do not attract running capability requirements under this standard. In a

35、similar manner, if any fire is extinguished with no reignition during the relevant period of the incident, it is deemed that there is no longer a requirement for running capability and the train can be stopped (as if it was a non-safety threatening technical fault). These examples illustrate how the

36、 impracticability of addressing all thermal events that could stop a train is circumvented by the philosophy applied. Compliance with the running capability requirements for any relevant system function is derived from one or more of the following: absence of a relevant fire; assuring system functio

37、n under the fire; assuring system function for a redundant array under the fire; extinguishing the fire; assuring sufficient remaining Tractive Effort under the fire. Copyright European Committee for Electrotechnical Standardization Provided by IHS under license with CENELECNot for ResaleNo reproduc

38、tion or networking permitted without license from IHS-,-,-BS EN 50553:2012EN 50553:2012 - 6 - NOTE 3 This document does not cover requirements regarding maintenance, cleaning or prevention of arson. Nevertheless these are important considerations in the management of fire safety and must be recognis

39、ed by those using this standard. They may be covered appropriately by the Maintenance requirements of Technical Specifications for Interoperability and the Safety Management Systems of Railway Undertakings. Copyright European Committee for Electrotechnical Standardization Provided by IHS under licen

40、se with CENELECNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 50553:2012- 7 - EN 50553:2012 1 Scope This European Standard defines requirements for running capability under fire conditions which are applicable to passenger carrying railway rolling stock. In

41、particular, technical measures are specified, compliance with which will contribute to conformity with the Directive and the relevant Technical Specifications for Interoperability (TSI). The standard specifies the fire conditions: for which it is not necessary to define running capability requiremen

42、ts as there is no significant potential for serious injury or threat to life; for which it is reasonable to expect trains to continue to run in a controlled manner; for which it is not reasonably practicable to define requirements which give complete assurance of running in a controlled manner, due

43、to the exceptional nature of the fire incident. The TSI SRT defines running capability requirements in respect of fires within technical areas/equipment only. However for general guidance the scope of this standard is extended to include fires from non-technical causes within passenger/staff areas w

44、hich may impact train system functions adjacent to and/or passing through the affected area. This extension of applicability significantly increases the number of system functions which are potentially at risk and therefore requires that the “reasonably practicable“ principles be extended to this ne

45、w condition. The standard does not consider situations where a primary non-fire incident is likely to immobilise the train by definition; for example major mechanical defect leading to derailment, even when fire then occurs. 2 Normative references The following documents, in whole or in part, are no

46、rmatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 3-7 +A1 2004 2007 Portable fire extinguishers Part 7: Ch

47、aracteristics, performance requirements and test methods EN 54 Series Fire detection and fire alarm systems EN 403 2004 Respiratory protective devices for self-rescue Filtering devices with hood for escape from fire Requirements, testing, marking EN 15663 2009 Railway applications Definition of vehi

48、cle reference masses CEN/TS 45545-1 2009 Railway applications Fire protection on railway vehicles Part 1: General CEN/TS 45545-2 2009 Railway applications Fire protection on railway vehicles Part 2: Requirements for fire behaviour of materials and components CEN/TS 45545-3 2009 Railway applications Fire protection on railway vehicles Part 3: Fire resistance requirements for fire barriers CEN/TS 45545-4 2009 Railway applications Fire protection on railway vehicles Part