BS EN 9300-012-2013 Aerospace series LOTAR Long Term Archiving and Retrieval of digital technical product documentation such as 3D CAD and PDM data Reference process description In.pdf

《BS EN 9300-012-2013 Aerospace series LOTAR Long Term Archiving and Retrieval of digital technical product documentation such as 3D CAD and PDM data Reference process description In.pdf》由会员分享，可在线阅读，更多相关《BS EN 9300-012-2013 Aerospace series LOTAR Long Term Archiving and Retrieval of digital technical product documentation such as 3D CAD and PDM data Reference process description In.pdf（16页珍藏版）》请在麦多课文档分享上搜索。

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN 9300-012:2013Aerospace series LOTARLong Term Archiving andRetrieval of digital technicalproduct documentation such as3D, CAD and PDM dataPart 012: Reference process descrip

2、tionIngestBS EN 9300-012:2013 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 9300-012:2013.The UK participation in its preparation was entrusted to TechnicalCommittee ACE/1, International and European Aerospace Policy andProcesses.A list of organizations repres

3、ented on this committee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2013. Published by BSI StandardsLimited 2013ISBN 978 0 580 80

4、326 0ICS 01.110; 35.240.30; 35.240.60; 49.020Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 28 February 2013.Amendments issued since publicationDate Text affected

5、BS EN 9300-012:2013EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 9300-012 January 2013 ICS 01.110; 35.240.30; 35.240.60; 49.020 English Version Aerospace series - LOTAR Long Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data - Part 012: Refere

6、nce process description Ingest Srie arospatiale - LOTAR - Archivage Long Terme et rcupration des donnes techniques produits numriques, telles que CAD, 3D et PDM - Partie 012: Description du processus de rfrence Soumission Luft- und Raumfahrt - LOTAR - Langzeitarchivierung und Bereitstellung digitale

7、r technischer Produktdokumentationen, beispielsweise 3D, CAD und PDM Daten - Teil 012: Referenzprozessbescheibung Aufnahme This European Standard was approved by CEN on 24 November 2012. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for givi

8、ng this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three offi

9、cial versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of

10、 Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,

11、Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2013 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN nation

12、al Members. Ref. No. EN 9300-012:2013: EBS EN 9300-012:2013EN 9300-012:2013 (E) 2 Contents Page Foreword 3 Introduction .4 1 Scope 5 2 Normative references 5 3 Terms, definitions and abbreviations 5 4 Applicability 5 5 Ingest 6 6 Detailed process steps description .6 6.1 General 6 6.2 Submit for Ing

13、est .7 6.3 Receive data .7 6.4 Check quality assurance .7 6.5 Send confirmation .8 6.6 Generate AIP 8 6.7 Approval Content Information 8 6.8 Error handling for denied SIP .9 6.9 Receive Confirmation 9 6.10 Error handling for generate AIP .9 7 Support Process Steps: Preservation Planning .9 8 Data de

14、scriptions .9 8.1 General 9 8.2 Involved roles 10 8.3 Involved data . 10 9 Definition Transfer to Data Generation (Milestone) 11 Bibliography . 12 Figure 1 Overview of Ingest process .6 BS EN 9300-012:2013EN 9300-012:2013 (E) 3 Foreword This document (EN 9300-012:2013) has been prepared by the Aeros

15、pace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior

16、 to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by July 2013, and conflicting national standards shall be withdrawn at the latest by July 2013. Attention is drawn to the

17、possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organisations of the following countri

18、es are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Polan

19、d, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 9300-012:2013EN 9300-012:2013 (E) 4 Introduction This European Standard was prepared jointly by ASD-STAN and the PROSTEP iViP Association. The PROSTEP iViP Association is an international non-p

20、rofit association in Europe. For establishing leadership in IT-based engineering it offers a moderated platform to its nearly 200 members from leading industries, system vendors and research institutions. Its product and process data standardization activities at European and worldwide levels are we

21、ll known and accepted. The PROSTEP iViP Association sees this European Standard and the related parts as a milestone of product data technology. Users should note that all European Standards undergo revision from time to time and that any reference made herein to any other standard implies its lates

22、t edition, unless otherwise stated. BS EN 9300-012:2013EN 9300-012:2013 (E) 5 1 Scope This European Standard provides a detailed description for the recommended process of transferring data to the archive as overviewed in EN 9300-010. This transfer includes the conversion of the Content Information

23、into the archiving format STEP and the generation of the Archive Information Package. Furthermore, the main focus for the process description is on the validation and verification of the converted Content Information. 2 Normative references The following documents, in whole or in part, are normative

24、ly referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 9300-003, Aerospace series LOTAR Long Term Archiving and Retrie

25、val of digital technical product documentation such as 3D, CAD and PDM data Part 003: Fundamentals and concepts EN 9300-007, Aerospace series LOTAR Long Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data Part 007: Terms and References 1)EN 9300-010,

26、Aerospace series LOTAR Long Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data Part 010: Overview Data Flow 1)ISO 14721:2003, Space data and information transfer systems Open archival information system Reference model OAIS 3 Terms, definitions and a

27、bbreviations For the purposes of this document, the terms, definitions and abbreviations given in EN 9300-007 apply. 4 Applicability EN 9300-012 is applicable to new 3-D product data records and may be applicable to existing 3D product data records, on current and earlier products, produced using pr

28、evious regulations, standards and procedures. The current version is focused on product data as defined in the domain specific parts. 1) Published as ASD-STAN Prestandard at the date of publication of this standard (www.asd-stan.org). BS EN 9300-012:2013EN 9300-012:2013 (E) 6 5 Ingest See Figure 1.

29、Figure 1 Overview of Ingest process During the Ingest process, the data producer submits the Submission Information Package (SIP) from the working environment into the archiving environment. The archive receives the data packages and checks if the SIP contains data of the recommended format and gene

30、rates the Archiving Information Package (AIP) afterwards. After submitting the SIP to the archive, the source data receives the status read only. Input data: SIP. Output data: AIP; Content Information (CI); SIP. 6 Detailed process steps description 6.1 General Input and output data described in this

31、 standard represent the minimal requirements for the fulfilment of the process steps. Additional data may be added, but shall match at a minimum the requirements for the information package (see EN 9300-003, Section 5.3.2.1 “Definition of the core model”). BS EN 9300-012:2013EN 9300-012:2013 (E) 7 6

32、.2 Submit for Ingest The producer initiates the submission of the SIP from his personal working environment to the archive. With the initiation of the submission the producer applies the approval for that SIP. A further change of the content data should not be possible otherwise the changed data sha

33、ll be archived by a new approval and data preparation process. Input data: SIP. Output data: SIP. 6.3 Receive data The archive receives the SIP for archiving from the producing system through data transfer. The SIP shall be kept within the archives working environment for further processing during t

34、he ingest process. Input data: SIP. Output data: SIP. 6.4 Check quality assurance A function within the Archive environment checks the quality of the ingested data. This includes the successful transfer of the SIP to the staging area. For digital submissions, these mechanisms may include Cyclic Redu

35、ndancy Checks (CRCs), or checksums associated with each data file, or the use of system log files to record and identify any file transfer, or checking for media read/write errors. In addition to OAIS recommendations, the function checks the types of data formats used and the existence of PDI within

36、 the received SIP. The exchanged data and its representations shall be stipulated in the ingest agreement between the archive and the producer. Stipulations may cover aspects such as CAD data formats and Model files or PDM data formats such as STEP. The agreement shall include, at a minimum, the spe

37、cification of: the key characteristics of the product information to preserve; the Descriptive Information of the SIP; the acceptance criteria used for the verification; the validation properties of the source information to archive; the related KPIs. Each agreement will be archived itself, as part

38、of the context information of the new category of product information to archive. Input data: SIP; Data formatting and document standards. BS EN 9300-012:2013EN 9300-012:2013 (E) 8 Output data: If the quality assurance check is successful: SIP; Confirmation Information. Otherwise: Error report. 6.5

39、Send confirmation The archive creates a report of the successful receiving of the SIP into the archives working environment. Input data: Confirmation Information. Output data: Confirmation report. 6.6 Generate AIP The archive performs the generation of an Archival Information Package (AIP) automatic

40、ally. This includes the conversion of the Content Information (with validation) from the submitted native format into the archiving format, the validation of the converted data, and the generation of any additional Preservation Descriptive information (PDI) and Descriptive Information (the meta data

41、 for the Content Information). “Generate AIP” shall ensure that the design intent of the source file of the producer is preserved conforming to the domain specific parts. It is based on the verification and on the validation of the key characteristics of the product data. Input data: SIP. Output dat

42、a: If generation is successful: AIP. If generation fails: Error report. The failure of the generation of the AIP is related to the conversion of the representation of the Content Information to its final format and its validation. 6.7 Approval Content Information This process step is recommended, bu

43、t not mandatory, and is applicable only to new data. This step synchronises with the producers engineering approval process (not shown), such that the final engineering approval is only given if the information passes the archiving criteria, and conversely, the archive only proceeds if the engineeri

44、ng approval is given. NOTE In effect, this step means that, if the data is not fit to archive, it is not fit to be approved for use. Since many of the archive checks should be performed automatically, putting archivability as a quality gate before engineering approval means that the cost of an addit

45、ional (expensive) engineering approval is avoided if the data needs rework in order to be archived. BS EN 9300-012:2013EN 9300-012:2013 (E) 9 Input data: AIP. Output data: AIP; CI. 6.8 Error handling for denied SIP The producer should perform an error check in the case that the data is rejected by t

46、he archive. Furthermore, the Producer should restart the Data Preparation, which includes the changing of the data, in order to make it fit to archive. Input data: Error report. Output data: SIP (identifying the data). 6.9 Receive Confirmation The producer receives the archives confirmation report.

47、Input data: Confirmation report. 6.10 Error handling for generate AIP Within this process the Producer and/or the Administrator has to perform an error handling procedure. This includes the decision whether data is still usable or has to be generated again. The administrator will be informed. Input

48、data: Error report. 7 Support Process Steps: Preservation Planning The process provides services and functions for monitoring the environment of the archive and recommendations to ensure that the information stored in the archive remains accessible to the consumer over the long term, even if the ori

49、ginal computing environment becomes obsolete. Preservation Planning functions include developing recommendations for archive standards and policies and monitoring changes in the technology environment, archiving format and the addressed consumer. Output data: Data formatting and document standards. 8 Data descriptions 8.1 General The descriptions here are informative; the definitions are found in EN 9300-007. BS EN 9300-012:2013EN 9300-012:2013 (E) 10 8.2